Panasonic LCD Projector Pt Vw440 Operating Instructions
Here you can view all the pages of manual Panasonic LCD Projector Pt Vw440 Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 71
![Page 71
Network
ENGLISH - 71
Settings
E-mail set up page (continued) J
9 Enter the E-mail Address2 of your desired recipient.
10 Select the conditions for sending e-mail.
MAIL CONTENTS:Select [NORMAL] or [SIMPLE].
ERROR:An error is detected by self-diagnosis.
LAMP RUNTIME:Remaining lamp service time has reached the value set in the field.
INTAKE AIR TEMPERATURE:Intake air temperature has reached the value set in the field.
10
9
Authentication set up page J
The POP/SMTP server is set on this page when...](http://img.usermanuals.tech/thumb/58/76016/w300_pt-vw440_en_om_d-70.png "Page 71
Network
ENGLISH - 71
Settings
E-mail set up page (continued) J
9 Enter the E-mail Address2 of your desired recipient.
10 Select the conditions for sending e-mail.
MAIL CONTENTS:Select [NORMAL] or [SIMPLE].
ERROR:An error is detected by self-diagnosis.
LAMP RUNTIME:Remaining lamp service time has reached the value set in the field.
INTAKE AIR TEMPERATURE:Intake air temperature has reached the value set in the field.
10
9
Authentication set up page J
The POP/SMTP server is set on this page when...")
Network
ENGLISH - 71
Settings
E-mail set up page (continued) J
9 Enter the E-mail Address2 of your desired recipient.
10 Select the conditions for sending e-mail.
MAIL CONTENTS:Select [NORMAL] or [SIMPLE].
ERROR:An error is detected by self-diagnosis.
LAMP RUNTIME:Remaining lamp service time has reached the value set in the field.
INTAKE AIR TEMPERATURE:Intake air temperature has reached the value set in the field.
10
9
Authentication set up page J
The POP/SMTP server is set on this page when...
Page 72
![Page 72
Network
72 - ENGLISH
Settings
Contents of mail sent J
Mail with the contents shown below is sent when the e-mail settings have\
z
been established.
=== Panasonic projector report(CONFIGURE) ===Projector Ty pe : PT-VX510Serial No : 000000000----- E-mail setup data -----TEMPER ATURE WARNING SETUP MINIMUM TIME at [ 60] minutes interval INTAKE AIR TEMPER ATURE Over [ 32degC / 89degF ]
ERROR [ OFF ] LA MP RUNTIME [ OFF ] at REM AIN [ 400]...](http://img.usermanuals.tech/thumb/58/76016/w300_pt-vw440_en_om_d-71.png "Page 72
Network
72 - ENGLISH
Settings
Contents of mail sent J
Mail with the contents shown below is sent when the e-mail settings have\
z
been established.
=== Panasonic projector report(CONFIGURE) ===Projector Ty pe : PT-VX510Serial No : 000000000----- E-mail setup data -----TEMPER ATURE WARNING SETUP MINIMUM TIME at [ 60] minutes interval INTAKE AIR TEMPER ATURE Over [ 32degC / 89degF ]
ERROR [ OFF ] LA MP RUNTIME [ OFF ] at REM AIN [ 400]...")
Network 72 - ENGLISH Settings Contents of mail sent J Mail with the contents shown below is sent when the e-mail settings have\ z been established. === Panasonic projector report(CONFIGURE) ===Projector Ty pe : PT-VX510Serial No : 000000000----- E-mail setup data -----TEMPER ATURE WARNING SETUP MINIMUM TIME at [ 60] minutes interval INTAKE AIR TEMPER ATURE Over [ 32degC / 89degF ] ERROR [ OFF ] LA MP RUNTIME [ OFF ] at REM AIN [ 400]...
Page 73
![Page 73
Network
ENGLISH - 73
Settings
Mail with the contents shown below is sent when an error has occurred. z
=== Panasonic projector report(ERROR) ===Projector Ty pe : PT-VX510Serial No : 000000000----- check system -----FAN [ OK ]INTAKE AIR TEMPER ATURE [ OK ]EXHAUST AIR TEMPER ATURE [ OK ]OPTICS MODULE TEMPER ATURE [ OK ]LA MP REM AIN TIME [ OK ]LA MP STATUS [ FAILED ]APERTURE (CONTR...](http://img.usermanuals.tech/thumb/58/76016/w300_pt-vw440_en_om_d-72.png "Page 73
Network
ENGLISH - 73
Settings
Mail with the contents shown below is sent when an error has occurred. z
=== Panasonic projector report(ERROR) ===Projector Ty pe : PT-VX510Serial No : 000000000----- check system -----FAN [ OK ]INTAKE AIR TEMPER ATURE [ OK ]EXHAUST AIR TEMPER ATURE [ OK ]OPTICS MODULE TEMPER ATURE [ OK ]LA MP REM AIN TIME [ OK ]LA MP STATUS [ FAILED ]APERTURE (CONTR...")
Network ENGLISH - 73 Settings Mail with the contents shown below is sent when an error has occurred. z === Panasonic projector report(ERROR) ===Projector Ty pe : PT-VX510Serial No : 000000000----- check system -----FAN [ OK ]INTAKE AIR TEMPER ATURE [ OK ]EXHAUST AIR TEMPER ATURE [ OK ]OPTICS MODULE TEMPER ATURE [ OK ]LA MP REM AIN TIME [ OK ]LA MP STATUS [ FAILED ]APERTURE (CONTR...
Page 74
![Page 74
Network
74 - ENGLISH
Settings
Change Password page J
Click [Change password].
1 Used to change the setting of [Administrator]
2 Used to change the setting of [User]
3 Used to change the setting of the password
Administrator mode
1 Displays the account to change
2 Current user name input field
3 Current password input field
4 New user name input field
5 New password input field
6 New password input field (re-enter for confirmation)
7 Button for executing password change
User account
1 Displays...](http://img.usermanuals.tech/thumb/58/76016/w300_pt-vw440_en_om_d-73.png "Page 74
Network
74 - ENGLISH
Settings
Change Password page J
Click [Change password].
1 Used to change the setting of [Administrator]
2 Used to change the setting of [User]
3 Used to change the setting of the password
Administrator mode
1 Displays the account to change
2 Current user name input field
3 Current password input field
4 New user name input field
5 New password input field
6 New password input field (re-enter for confirmation)
7 Button for executing password change
User account
1 Displays...")
Network 74 - ENGLISH Settings Change Password page J Click [Change password]. 1 Used to change the setting of [Administrator] 2 Used to change the setting of [User] 3 Used to change the setting of the password Administrator mode 1 Displays the account to change 2 Current user name input field 3 Current password input field 4 New user name input field 5 New password input field 6 New password input field (re-enter for confirmation) 7 Button for executing password change User account 1 Displays...
Page 75
![Page 75
Network
ENGLISH - 75
Settings
CRESTRON RoomView page J
You can monitor or control the projector using RoomView.
To display the operation page of RoomView from Web Control screen, access with the administrator rights is
required. (The [CRESTRON RoomView] button is not displayed on the Web Control screen for user rights.)
When you click [CRESTRON RoomView], the RoomView operation page is displayed.
If Adobe Flash Player is not installed in your computer, or if the browser does not support Flash, this...](http://img.usermanuals.tech/thumb/58/76016/w300_pt-vw440_en_om_d-74.png "Page 75
Network
ENGLISH - 75
Settings
CRESTRON RoomView page J
You can monitor or control the projector using RoomView.
To display the operation page of RoomView from Web Control screen, access with the administrator rights is
required. (The [CRESTRON RoomView] button is not displayed on the Web Control screen for user rights.)
When you click [CRESTRON RoomView], the RoomView operation page is displayed.
If Adobe Flash Player is not installed in your computer, or if the browser does not support Flash, this...")
Network ENGLISH - 75 Settings CRESTRON RoomView page J You can monitor or control the projector using RoomView. To display the operation page of RoomView from Web Control screen, access with the administrator rights is required. (The [CRESTRON RoomView] button is not displayed on the Web Control screen for user rights.) When you click [CRESTRON RoomView], the RoomView operation page is displayed. If Adobe Flash Player is not installed in your computer, or if the browser does not support Flash, this...
Page 76
Network
76 - ENGLISH
Settings
Info page
Click Info on the operation page.
1 Projector name
Displays the name of the projector.
2 Mac Address
Displays the MAC address.
3 Resolution
Displays the resolution of the projector.
4 Lamp Hours
Displays the lamp usage time (converted value).
5 Power Status
Displays the status of the power.
6 Source
Displays the selected video input.
7 Projector Position
Displays the projection method of the projector.
8 Lamp Mode
Displays the lamp...
Page 77
![Page 77
ENGLISH - 77
Maintenance
LAMP and WARNING Indicators
Managing the indicated problems
If a problem should occur inside the projector, the , and/or
indicators will inform you. Manage the indicated problems as follow.
CAUTION
Before you take a remedial measure, follow the procedure of switching the power off indicated in “Turning off the projector”. z
(Æpage 30)
If multiple indicators light or blink, verify the status of the projecto\
r by looking at each indicator. z
Note
Confirm the status of the...](http://img.usermanuals.tech/thumb/58/76016/w300_pt-vw440_en_om_d-76.png "Page 77
ENGLISH - 77
Maintenance
LAMP and WARNING Indicators
Managing the indicated problems
If a problem should occur inside the projector, the , and/or
indicators will inform you. Manage the indicated problems as follow.
CAUTION
Before you take a remedial measure, follow the procedure of switching the power off indicated in “Turning off the projector”. z
(Æpage 30)
If multiple indicators light or blink, verify the status of the projecto\
r by looking at each indicator. z
Note
Confirm the status of the...")
ENGLISH - 77 Maintenance LAMP and WARNING Indicators Managing the indicated problems If a problem should occur inside the projector, the , and/or indicators will inform you. Manage the indicated problems as follow. CAUTION Before you take a remedial measure, follow the procedure of switching the power off indicated in “Turning off the projector”. z (Æpage 30) If multiple indicators light or blink, verify the status of the projecto\ r by looking at each indicator. z Note Confirm the status of the...
Page 78
![Page 78
78 - ENGLISH
Maintenance
Replacement
Before replacing the unit
When you perform maintenance or replacement of the parts, make sure to t\
urn off the power and disconnect z
the power plug from the wall outlet. (Æpages 26, 30)
Be sure to observe the procedure “Turning off the projector” ( zÆpage 30) when performing power supply
operation.
Maintenance
Outer Case J
Wipe off dirt and dust using a soft dry cloth.
If the dirt is persistent, soak the cloth with water and wring it thorou\
ghly before wiping....](http://img.usermanuals.tech/thumb/58/76016/w300_pt-vw440_en_om_d-77.png "Page 78
78 - ENGLISH
Maintenance
Replacement
Before replacing the unit
When you perform maintenance or replacement of the parts, make sure to t\
urn off the power and disconnect z
the power plug from the wall outlet. (Æpages 26, 30)
Be sure to observe the procedure “Turning off the projector” ( zÆpage 30) when performing power supply
operation.
Maintenance
Outer Case J
Wipe off dirt and dust using a soft dry cloth.
If the dirt is persistent, soak the cloth with water and wring it thorou\
ghly before wiping....")
78 - ENGLISH Maintenance Replacement Before replacing the unit When you perform maintenance or replacement of the parts, make sure to t\ urn off the power and disconnect z the power plug from the wall outlet. (Æpages 26, 30) Be sure to observe the procedure “Turning off the projector” ( zÆpage 30) when performing power supply operation. Maintenance Outer Case J Wipe off dirt and dust using a soft dry cloth. If the dirt is persistent, soak the cloth with water and wring it thorou\ ghly before wiping....
Page 79
Replacement ENGLISH - 79 Maintenance Resetting the Filter Counter J Be sure to reset the Filter counter after replacing the air filter units. (Æpage 58 "Filter counter reset") Attention Turn off the power before you replace the air filter units. z When attaching the air filter unit, make sure that the projector is stable, and work in an environment that is z safe, even in the event of the air filter unit dropping. Do not operate the projector with the air filter units removed. Dust may...
Page 80
![Page 80
Replacement
80 - ENGLISH
Maintenance
JLamp unit
The lamp unit is a consumable component. You can check the total usage time using Lamp runtime in the
Information menu (Æpage 60).
It is recommended to ask an authorized engineer to replace the lamp unit\
. Contact your dealer.
Consult your dealer to purchase a replacement lamp unit (ET-LAV200).
CAUTION:
■ Do not replace the lamp unit when it is hot. (Wait at least 1 hour after use.)
The inside of the cover can become very hot, take care to avoid burn...](http://img.usermanuals.tech/thumb/58/76016/w300_pt-vw440_en_om_d-79.png "Page 80
Replacement
80 - ENGLISH
Maintenance
JLamp unit
The lamp unit is a consumable component. You can check the total usage time using Lamp runtime in the
Information menu (Æpage 60).
It is recommended to ask an authorized engineer to replace the lamp unit\
. Contact your dealer.
Consult your dealer to purchase a replacement lamp unit (ET-LAV200).
CAUTION:
■ Do not replace the lamp unit when it is hot. (Wait at least 1 hour after use.)
The inside of the cover can become very hot, take care to avoid burn...")
Replacement 80 - ENGLISH Maintenance JLamp unit The lamp unit is a consumable component. You can check the total usage time using Lamp runtime in the Information menu (Æpage 60). It is recommended to ask an authorized engineer to replace the lamp unit\ . Contact your dealer. Consult your dealer to purchase a replacement lamp unit (ET-LAV200). CAUTION: ■ Do not replace the lamp unit when it is hot. (Wait at least 1 hour after use.) The inside of the cover can become very hot, take care to avoid burn...