Panasonic LCD Projector Pt Vw355n Pt Vx425n Operating Instructions

[Change password]User name for [Administrator]
l
―111
User name for [User]l―111
Password for [Administrator]l―111
Password for [User]l
l111
[Crestron 
Connected(TM)] Operation
l
―11 2
[Tools]l―11 3
[Info]l―11 3
[Help]l―11 4
*1 
The functions with l  marks in the columns of administrator rights/user rights indicate that the operation can be performed 
by each right.
Description of each item 
1
2
3
4
5
6
1  Page tab
Switches pages by clicking this item.
2  [Status]
The status of the projector is displayed...

1 [PROJECTOR TYPE]
Displays the type of projector.
2  [PROJECTOR NAME]
Displays the name set in the projector.
3  [MAIN VERSION]
Displays the firmware version of the projector.
4  [POWER]
Displays the status of the power.
5  [PICTURE MODE]
Displays the status of the picture mode.
6  [SERIAL NUMBER]
Displays the serial number of the projector.
7  [NETWORK VERSION]
Displays the version of firmware of the network.
8  [AV MUTE]
Displays the AV mute status.
9  [VOLUME]
Displays the volume status.
10  [INPUT]...

[LAMP REMAIN TIME]The lamp runtime has exceeded the prescribed cumulative time, and it is now time 
to replace the lamp.
[LAMP STATUS] The lamp has failed to light.
Wait a short while for the lamp to cool off, and then turn on the power.
[APERTURE (CONTRAST-SHUT -
TER)] Trouble has occurred in the contrast shutter circuitry. Consult your dealer.
[AIR FILTER] There is too much dust accumulated in the air filter unit. Turn off the projector and 
unplug the power plug from the wall outlet, then replace the...

[Advanced control] page
Click [Projector control] → [Advanced control].
1
2
1 [POSITION]
Adjusts the position of image and the keystone 
correction. 2 
[PICTURE]
Adjusts the items of image.
[Network config] page
Click [Detailed set up] → [Network config].
1)  Click [Network config].
 
f The [CAUTION!] screen is displayed.
2)  Select the item which you want to change the setting, then click [Next].
 
f The current setting is displayed.
3)  Click [Change] button.
 
f The setting change screen is...

1 [DHCP ON]/[DHCP OFF]
To enable the DHCP client function, set to [DHCP ON].
2  [IP ADDRESS]
Enter the IP address when not using a DHCP server.
3  [SUBNET MASK]
Enter the subnet mask when not using a DHCP server.
4  [DEFAULT GATEWAY]
Enter the default gateway address when not using a 
DHCP server. 5 
[DNS1]/[DNS2]
Enter the DNS1/DNS2 server address.
Permissible/ available characters for the entry of DNS1/
DNS2 server address.
(primary):
Numbers (0 - 9), period (.)
(Example: 192.168.0.253).
6...

1 [DHCP ON]/[DHCP OFF]
To enable the DHCP client function, set to [DHCP ON].
2  [IP ADDRESS]
Enter the IP address when not using a DHCP server.
3  [SUBNET MASK]
Enter the subnet mask when not using a DHCP server.
4  [DEFAULT GATEWAY]
Enter the default gateway address when not using a 
DHCP server.
5  [DNS1]/[DNS2]
Enter the preferred DNS/alternate DNS server when not 
using a DHCP server.
6  [SSID]
Enter the same character string that are registered in 
the access point. 7 
[Back]/[Next]
Click the [Back]...

1 [ENABLE]
Select [Enable] to use the E-mail function.
2  [SMTP SERVER NAME]
Enter the IP address or the server name of the E-mail 
server (SMTP). To enter the server name, the DNS 
server needs to be set up.
3  [MAIL FROM]
Enter the E-mail address of the projector. (Up to 63 
characters in single byte)
4  [MEMO]
Enter information such as the location of the projector 
that notifies the sender of the E-mail. (Up to 63 
characters in single byte) 5 
[MINIMUM TIME]
Change the minimum interval for the...

1 [Auth]
Select the authentication method specified by your 
Internet service provider.
2  [SMTP Auth]
Set when the SMTP authentication is selected.
3  [POP server name]
Enter the POP server name.
Allowed characters:
Alphanumerics (A - Z, a - z, 0 - 9)
Minus sign (-) and period (.)
4  [User name]
Enter the user name for the POP server or the SMTP 
server. 5 
[Password]
Enter the password for the POP server or the SMTP 
server.
6  [SMTP server port]
Enter the port number of the SMTP server.
(Normally 25)...

Example of E-mail sent for an error
Mail with the contents shown below is sent when an error has occurred.
=== Panasonic projector report(ERROR) ===
Projector Ty pe          : PT-V W355N
Serial No               : 000000000
-----  check syste m -----
FAN                           [   OK   ]
INTAKE AIR TEMPER ATURE 
       [   OK   ]
EXHAUST AIR TEMPER ATURE       [   OK   ]
OPTICS MODULE TEMPER ATURE     [   OK   ]
LA MP REM AIN TIME              [   OK   ]
LA MP STATUS                   [   OK   ]...

[ECO management set up] page
You can make settings for the ECO management function of the projector.
Click [Detailed set up] → [ECO management set up].
1
2
3
4
5
6
78
1  [LAMP POWER]
Selects the [LAMP POWER] setting.
2  [AUTO POWER SAVE]
Select [ON] to set [AMBIENT LIGHT DETECTION], 
[SIGNAL DETECTION], and [AV MUTE DETECTION].
3  [AMBIENT LIGHT DETECTION]
Enable ([ON])/disable ([OFF]) the ambient light 
detection function. 
4  [SIGNAL DETECTION]
Enable ([ON])/disable ([OFF]) the signal detection...