Panasonic LCD Projector Pt Vw355n Pt Vx425n Operating Instructions

[Administrator] account
1
2
3
4
5
6
7
1 [Account : Administrator]
Displays the account to change. 
2  [Current] [User name]
Enter the user name before the change.
3  [Current] [Password]
Enter the current password.
4  [New] [User name]
Enter the desired new user name.   
(Up to 16 characters in single byte) 5 
[New] [Password]
Enter the desired new password.   
(Up to 16 characters in single byte)
6  [New] [Password (Retype)]
Enter the desired new password again.
7  [OK]
Determines the change of...

[Change password] (For user rights)
Only the change of password is enabled under the user rights.
1
2
4 3
1 [Old Password]
Enter the current password.
2  [New Password]
Enter the desired new password. (Up to 16 characters 
in single byte) 3 
[Retype]
Enter the desired new password again.
4  [OK]
Determines the change of password.
Note
 
f To change the account of the administrator, you must enter the [User name] and [Password] in [Current].
[Crestron Connected(TM)] page 
The projector can be...

[Tools] page
Click [Tools] on the control page.
1
2
3
4
5
1 [Control System]
Set the information required for communicating with the 
controller to be connected with the projector.
2  [User Password]
Set the user rights password for the Crestron 
Connected™ control page.
3  [Admin Password]
Set the administrator rights password for the Crestron 
Connected™ control page. 4 
Network status
Displays the settings of wired LAN.
[DHCP]
Displays the current setting.
[IpAddress]
Displays the current setting....

[Help] page
Click [Help] on the control page.
The [Help Desk] window is displayed.
1
1 [Help Desk]
Send/receive messages to/from an administrator who uses 
Crestron Connected™.
114 -  ENGLISH
Chapter 4   Settings - [NETWORK/USB] menu
Chapter 4   Settings - [NETWORK/USB] menu  

Chapter 5   Operation of Function
This chapter describes the operation methods of some functions.
ENGLISH -  11 5  

Memory Viewer function
The Memory Viewer function makes it is possible to project the video or still image \
stored in the USB memory.
What you can project with the Memory Viewer function
Memory Viewer function supports the following files.
Still imageExtension
Format Restriction
jpg/jpeg JPEGNumber of pixels: Maximum 8 000 x 8 000
(For progressive JPEG, maximum 4 096 x 4 096)
YUV format: Only YUV444, YUV422, and YUV411 supported
Color mode: Only RGB supported
bmp Windows Bitmap Number of pixels: Maximum...

Note
 
f It is compatible with the USB memory sold in the market.
 
f It cannot be used the other format other than the formatted with F AT16 and FAT32.
Inserting the USB memory
1) Insert the USB memory directly into the  terminal.
Attention
 
f When inserting the USB memory, confirm the direction of the plug and do not damage the terminal.
Removing the USB memory
1)  Make sure that the USB memory is not flashing, and then unplug it.
Attention
 
f Please note following points when removing the USB...

 
f The cursor moves from the thumbnail display area on the right of the scr\
een to the folder list on the upper left of the 
screen. (The background is orange.)
2)  Press as to select a folder, then press the  button.
 
f If there is a folder in the lower level, it will be expanded and displayed in the folder list on the upper left of the screen.
 
f The selected folder (cursor position) is displayed on an orange background.
3)  Press asqw  to select the desired file.
 
f The detailed information of...

5) Press the  button on the remote control or the  
button on the control panel  to exit playing.
 
f   Exit the full screen display, and the Memory Viewer screen (in list display) is displayed.
 
f If you want to continue to play another file,  please perform the step 1) to 4) again.
Note
 
f When Memory Viewer screen is displayed, each time you press the  button on the remote control 
or the  button on the control panel, the cursor will move between the folder list area and the 
thumbnail (or list)...

 
f The selected still image will be played in full screen.
 
f Press w to play the next file.
 
f Press q to play back to the previous file.
2)  Press the  button on the remote control or the  
button on the control panel.
 
f Exit the full screen and return to the MEMORY VIEWER screen of thumbnail display method.
Note
 
f If the number of recording pixels is less than display dots*1, it will be enlarged while maintaining the aspect ratio.
 
f If the number of recording pixels is more than display...