Panasonic LCD Projector Pt Vw355n Pt Vx425n Operating Instructions

5) Press as  to select the item and press as qw to change the setting according to the instructions .
[SSID] Enter the same character string that is registered in the access point.
[AUTHENTICATION] Set the user authentication method used by the network to be connected.
[OPEN] Select when the access point authentication method is Open System.
[SHARED] Select when the access point authentication method is Shared Key .
[WPA-PSK ] Select when the access point authentication method is WPA-PSK.
[WPA2-PSK ]...

 
r Default setting of [USER1], [USER2], [USER3]
 
f The following settings are set before the projector leaves the factory.
[SSID] Panasonic Projector
[DHCP] OFF
[IP ADDRESS] 192.168.11.100
[SUBNET MASK] 255.255.255.0
[DEFAULT GATEWAY] 192.168.11.1
[AUTHENTICATION] OPEN
[ENCRYPTION] NONE
[DNS1]/[DNS2] NONE
[CONNECTION LOCK]
You can switch the input signal between Panasonic APPLICATION, MIRRORING and MEMORY VIEWER, or choose one fixed 
input signal from three of them.
1) Press as to select [CONNECTION...

[PASSWORD CHANGE]
1) Press as to select [PASSWORD CHANGE].
2)  Press the  button.
 
f The [PASSWORD CHANGE] screen is displayed.
3)  Press asqw  to set the password.
4)  Press as to select [OK], and press the  button.
Note
 
f You can enter 8 characters at most.
 
f Change the password periodically that is hard to guess.
[NETWORK CONTROL]
Set when you want to control the projector from a computer connected to the network.
1)  Press as to select [NETWORK CONTROL].
2)  Press qw to switch the item.
 
f The...

Note
 
f If you use the “Wireless Manager ME6.3” and the “Multi Projector Monitoring & Control Software” on the same computer at 
the same time, the function of delivering image to all may not be availa\
ble. If you want to use them at the same time, please 
use another computer with respective software.
[MULTI-LIVE]
Switch to the Multi-live mode when using the “Wireless Manager ME6.3”. For details, refer to "Wireless Manager ME6.3" 
operating instructions. You can also use the application that...

 
f If you change the settings in the [INTERVAL] or [EFFECT] during playback of a MEMORY VIEWER, it does not affect the 
projected image during playback. Please re-play it back to the MEMOR Y VIEW screen in the [THUMBNAIL] display method 
or [LIST] display method. For information on how to use MEMORY VIEW function, refer to “Memory Viewer Function”.   
(x page 116) 
 
f When the [GUIDE] is set to [ON], the operation guide and timer bar will automatically disappear after about 3 seconds. 
 
f Press asqw...

[MAC ADDRESS]Displays the MAC address of wired LAN.
[WIRELESS LAN] Displays the network information of the wireless LAN that set on the pro\
jector.
[ANTENNA LEVEL] Displays the radio wave state of the wireless LAN.
[NETWORK] Displays the connection method of the wireless LAN.
[SSID] Displays the character string of SSID.
[AUTHENTICATION] Displays the user authentication method.
[EAP] Displays the type of EAP.
[ENCRYPTION] Displays the encryption method.
[DEFAULT KEY] Displays the number of the default...

Connecting with Wired LAN
Example of a normal network connection
 
ComputerProjector
LAN cable (straight) LAN cable (straight)
Hub
Attention
 
f When a LAN cable is directly connected to the projector, the network connection must be made indoors.
Note
 
f A LAN cable is required to use the wired LAN function.
 
f Use shielded LAN cable (STP cable) that is compatible with category 5 or above.
 
f Use a LAN cable with length of 100 m or shorter.
Projector settings
1)  Use the LAN cable (Straight) to...

Connecting with Wireless LAN
Example of connection
IEEE802.11a/b/g/n
Example of connection for image transfer
MIRRORINGImage transfer application software
Connection image
 
Intel® WiDi / Intel® Pro WiDi / Miracast 
compatible device
(Example) Copyright protection content display
Projector
 
(Example) Multi-screen display
iPad/iPhone/iPod touch, Android mobile terminal and computer  which are installed with the image transfer application software Projector
Input MIRRORING Panasonic APPLICATION...

Note
 
f Wireless LAN and wired LAN cannot be used in the same segment.
 
f When multiple devices are connected, a unique IP ADDRESS must be allocated to each device.
 
f SSID has to be entered in alphanumeric letters.
 
f You cannot set “any” or “ANY” for SSID.
 
f The projector settings are not required when MIRRORING is connected. For details about MIRRORING, please refer to 
"About MIRRORING" ( x page 123).
 
f The following settings are set before the projector leaves the factory.
[SIMPLE]...

4) Click [OK].
 
f [Projector status] page is displayed.
Note
 
f If you use a web browser to control the projector, set [NETWORK CONTROL] to [ON] in [NETWORK/USB] ( x page 93). 
 
f Do not perform setting or control simultaneously by starting up multiple\
 web browsers. Do not set or control the projector 
from multiple computers.
 
f Change the password first. ( x page 110)
 
f Access will be locked for few minutes when an incorrect password is ente\
red three times consecutively.
 
f Some items on the...