Panasonic LCD Projector Pt Vw355n Pt Vx425n Operating Instructions

Note
 
f If you want to use this function, insert the USB memory directly into the  port. For details, please refer to " 
Memory Viewer function" ( x page 116).
 
f When [MIRRORING] or [Panasonic APPLICATION] is selected in [CONNECTION LOCK], [KEY NOT APPLICABLE] screen 
will be displayed ( x page 92).
Using the MIRRORING function
The MIRRORING is a function to project the same images as the displayed images on the device with the projector . The 
MIRRORING function connects the Intel® WiDi /...

 buttons 
1)  Press the  buttons on the remote control.
Note
 
f To use these buttons, connect with Wired LAN or Wireless LAN, connect  port of the projector and your 
computer with a USB cable.
Using the DIGITAL ZOOM function
(Only for still image-based computer (RGB) and still image-based HDMI signals input)
You can enlarge the center area. You can also change the location of the area to be enlarged. 
 buttons
1)  Press the  button or < D.ZOOM -> button on the remote control.
 
f The moving screen is...

Using the FREEZE function
You can freeze the projected image and stop the sound temporarily, regardless of the playing condition of the external device.
 button
1) Press the  button on the remote control.
 
f The video is paused and the audio is muted. [FREEZE] is displayed on the lower left of the screen during FREEZE.
2)  Press the  button again.
 
f The video playback resumes and the audio is unmuted.
Note
 
f When no signal input, [KEY NOT APPLICABLE] message will appear.
 
f When [MIC] is set to...

Press the  button again, the red frame of the sub screen will disappear and then return to switch the input source of 
the main screen.
Using the P-TIMER function
You can operate the presentation timer function.
Presentations, etc. can be performed while checking the elapsed time or \
time remaining in the preset time.
 button
1) 
Press the  button on the remote control.
 
f The count is started.
 
f The elapsed time or the remaining time is displayed at the bottom right \
of the projected image.
2)...

Chapter 4   Settings
This chapter describes the settings and adjustments you can make using the on-screen menu.
ENGLISH -  55  

Menu Navigation
The on-screen menu (Menu) is used to perform various settings and adjustments of the projector.
Navigating through the menu
Operating procedure
 button
1) 
Press the  button on the remote control or the control panel.
 
f The main menu screen appears.
2)  Press as to select an item from the main menu.
 
f The selected item is highlighted in yellow.
3)  Press the  button.
 
f The sub-menu is displayed, and sub-menu items become selectable.
4)  Press as to select the desired sub-menu item,...

Note
 
f Pressing the  button or   button while the menu screen is displayed returns to the previous menu.
 
f Some items may not be adjusted or used for certain signal formats to be \
input to the projector. The menu items that cannot 
be adjusted or used are shown in gray characters, and they cannot be selected. [DIGIT AL CINEMA REALITY] and [FRAME 
LOCK] may not be displayed depending on the input signal.
 
f Some items can be adjusted even if signals are not input.
 
f Individual adjustment screen is...

Sub-menu
The sub-menu screen of the selected main menu appears, and you can set and adjust the various items in the sub-menu.
[PICTURE] 
Sub-menu itemFactory default Page
[PICTURE MODE] [STANDARD]60
[CONTRAST] [0]60
[BRIGHTNESS] [0]61
[COLOR]*
1[0] 61
[TINT]*1[0] 61
[SHARPNESS] [8]61
[COLOR TEMPERATURE] [DEFAULT]62
[IRIS] [OFF]*
262
[ADVANCED MENU] -62
[DAYLIGHT VIEW] [AUTO]63
[DIGITAL CINEMA REALITY] [ON]63
[NOISE REDUCTION]*
3[OFF] 63
[TV-SYSTEM]*3[AUTO] 64
[RGB/YP
BPR]/[RGB/YCBCR]*4[AUTO] 64
*1  Only...

[PROJECTOR SETUP] 
Sub-menu itemFactory default Page
[STATUS] -77
[COMPUTER2 SELECT] [COMPUTER2 IN] 77
[PROJECTOR ID] [ALL]78
[INITIAL START UP] [LAST MEMORY] 78
[PROJECTION METHOD] [FRONT/DESK]78
[HIGH ALTITUDE MODE] [OFF]78
[LAMP POWER] [NORMAL]79
[ECO MANAGEMENT] -79
[EMULATE] [DEFAULT]80
[FUNCTION BUTTON] -81
[AUDIO SETTING] -81
[EASY SETTING] -83
[TEST PATTERN] -83
[FILTER COUNTER] -83
[INITIALIZE ALL] -84
[SECURITY] 
Sub-menu item Factory Default Page
[PASSWORD] [OFF]85
[PASSWORD CHANGE] -85
[TEXT...

[PICTURE] menu
On the menu screen, select [PICTURE] from the main menu, and select an i\
tem from the sub-menu.
Refer to "Navigating through the menu" (x page 56) for the operation of the menu screen.
 
f After selecting the item, press asqw to set.
[PICTURE MODE]
You can switch to the desired picture mode suitable for the image source and the environment in which the projector is used.
1)  Press as to select [PICTURE MODE]. 
2)  Press qw or the  button.
 
f The [PICTURE MODE] individual...