Panasonic LCD Projector Pt Tw343 Operating Instructions

ENGLISH - 41
 
buttons
1) Press the  or < D.ZOOM -> button on the remote control.
 fThe [D. zoom] individual adjustment screen is displayed.
 fPress asqw on the remote control to move the display position during zoom in. 
[D.zoom] individual adjustment 
screenOperationAdjustmentAdjustment range
Press the  button.Increases magnification.0 ~ 33Press the  button.Decreases magnification.
While the screen is displayed and the 
image is expanded.
Press the as buttons.Moves the area to the top 
or the...

42 - ENGLISH
Using the Daylight View Lite function
The Daylight View Lite function improves the vividness of the image even if it is proj\
ected under a bright light.
button
1) Press the  button on the remote control. 
 fThe Daylight View Lite function will be switched enable/disable each time you press th\
e button.
Note
 fFor details, please refer to the [Color adjust] menu → [Daylight View] (x page 54).
Setting the remote control ID numbers
When you use the system with multiple projectors, you can...

ENGLISH - 43
Chapter 4   Settings
This chapter describes the settings and adjustments you can make using t\
he on-screen menu.  

44 - ENGLISH
Menu Navigation
The on-screen menu (Menu) is used to perform various settings and adjustments of the projector.
Navigating through the menu
Operating procedure
 
button
1) Press the  button on the remote control or the control panel.
 fThe main menu screen appears.
2) Press as to select an item from the main menu.
 fThe selected item is highlighted in orange.
3) Press the  button.
 fThe submenu is displayed, and submenu items become selectable.
(there is no lower menu under the...

ENGLISH - 45
5) Press as to switch or adjust settings.
 fSome items will switch in order as follows each time you press as.
ABC
6) Press the  button or the  button.
 fThe changed settings or the adjusted value is confirmed. 
7) Press as to select a sub-menu item, press the  button.
 fSwitches to the next layer of the menu screen.
8) Press the  button.
 fIf the selected item can be set or adjusted,  will be displayed.
9) Press as to switch or adjust settings.
 fSome items will switch in order as follows...

46 - ENGLISH
Sub-menu
The sub-menu screen of the selected main menu appears, and you can set a\
nd adjust the various items in the submenu.
[Display]  
Sub-menu itemFactory defaultPage
[Auto PC adj.]*1-49
[Fine sync]*1-49
[H Position]*1-49
[V Position]*1-50
[H.Size]*1-50
[Aspect][Normal]50
[Project way][Front]51
[Menu position][Upper left]51
[Background display][Blue]51
[System]-51
*1 Only for computer signals.
[Color adjust]  
Sub-menu itemFactory defaultPage
[Image mode][Standard]52
[Contrast][32]52...

ENGLISH - 47
Sub-menu itemFactory defaultPage
[Keystone][Store]61
[Logo]-63
[Security]-65
[Power management][Shut down]67
[Filter counter]-67
[Test pattern][Off]68
[Network]-68
[Remote control][ALL]69
[Factory default]-70
[Memory Viewer]  
Sub-menu itemFactory defaultPage
[Set Slide]-71
[Slide Transition Effect][Slide Right]71
[Sort Order][Name Order]71
[Rotate][No Rotate]71
[Best Fit][Off]72
[Repeat][Off]72
[Apply]-72
[Info.]  
Details (x page 73)
Note
 fSome items may not be adjusted or used for...

48 - ENGLISH
Input menu
To select the input source directly by pressing the input selection butto\
ns on the remote control or to select the 
input source in the Input screen by pressing the  button on the control panel.
Switching the input source
When using the remote control
1) Press the input selection (, , , ,\
 ) buttons. 
 fThe selected input signal will be projected.
Press this button to switch to Computer 1/Component input.
Switch to Computer 2 input.
Switch to HDMI input.
Press this button to...

ENGLISH - 49
[Display] menu
On the menu screen, select [Display] from the main menu, and select an i\
tem from the sub-menu.Refer to “Navigating through the menu” (x page 44) for the operation of the menu screen.
 fAfter selecting the item, press as to set.
[Auto PC adj.]
(Only for computer signals input)
When input the computer (RGB) signals, the image may be moved up, down, left or right such as flickering, press the  button to adjust [Fine sync], [H position], [V position] and [H.Size] automatically...

50 - ENGLISH
OrientationOperationAdjustment
Horizontal (left and 
right) adjustment.
Press the a button.The image position moves to the right.
Press the s button.The image position moves to the left.
Note
 f[H Position] is not available while the image is expanded in the digital zoom function.
[V Position]
(Only for computer signals input)
Move the image position vertically if the image position projected on th\
e screen is shifted even when the relative position of the projector and the screen is...