Panasonic LCD Projector PT-ST10U Operating Instructions

Basic operations
ENGLISH  21
Turn the projector ON or OFF (continued) 
TURN THE PROJECTOR OFF
STANDBY (R)ON (G)
1)
2)
When operating the projector, check the status of the 
POWER indicator. (
 page 19
)
1Press the POWER button.
A confirmation screen will be displayed – the 
screen will go off and return to projection if there   
is no operation for approximately 10 seconds.
2Press the button again.
The lamp goes off and the projection stops.
The cooling fan continues its rotation and 
• 
POWER...

Basic operations
22  ENGLISH
Project an image
Preparations
Confirm the connections of the peripheral devices 
• 
(  page 16, 17) and power cord 
(
  page 18
).
Switch on the power 
•  (
  page 20
) to start projecting.
Select the input signal and adjust the image.
• 
SELECT THE INPUT SIGNAL
1Switch on the connected devices.
When playing a connected DVD player, if  SIGNAL 
SEARCH  (DISPLAY OPTION  menu) is set to 
ON, the input signal is detected and projected 
automatically when the projector is...

Basic operations
ENGLISH  23
Remote control operation
You can freeze the projected image and temporarily 
stop the sound, regardless of the playing condition of 
the connected device.
FR EE ZEPress the button again to cancel it.  
The image is distorted momentarily 
when the projection is stopped and 
restarted.
STOP  THE PROJECTION 
TEMPORARILY
You can temporarily stop the projection and the sound 
from the projector.
A V
MUTEPress the button again to cancel it.
SWITCH THE INPUT SIGNAL
You can switch...

Basic operations
24  ENGLISH
Remote control operation (continued)
RESET TO FACTORY DEFAULT 
SETTINGS
You can reset most of the customized settings to the 
factory default settings.
DEFAULT
For details, see “Reset to factory default settings”.  
(   page 26
)
CONTROL SPEAKER VOLUME
You can control the volume of the built-in speakers 
and output audio sound.
VOLUME
+ : increases the volume
- : decreases the volume
PROJECT AN IMAGE USING 
INDEX-WINDOW
You can split a projected image into 2 windows using...

Basic operations
ENGLISH  25
Remote control operation (continued)
ENLARGE THE IMAGE
You can enlarge the projected image to the center 
position by emphasizing within the range of 1× to 2×.
DIGITAL ZOOM
Press [RETURN] or [MENU] to escape.
[DIGITAL ZOOM] button operation
+ button: zooms in
- button: zooms out
Press “
 ” to shift the center point.
NOTE:
When the 
•  COMPUTER signal is input, if FRAME LOCK in 
the POSITION  menu is OFF,
 enlargement range is 1× to 3×.
When the 
•  COMPUTER signal is...

Settings
26  ENGLISH
Menu operation
Depending on the selected input signals, some 
items and functions may not be adjusted or 
available. Some can be adjusted without any 
signals.
1PICTUREPOSITIO N
LANGUAGE
DISPLA Y OPTIONPROJECT OR SETUP
SECURITY
NETWORK PICTURE MODE
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
COLORT
EMPERAT URE
DA YLIGHT  VIEW ST
ANDARD
DEFA ULT
AUTO
ME NU
NOISE REDUCTIO N
TV -SYSTEM OFF
AUTORETURN
ENTER
SELEC
T
FUNCTION
2Select the main menu item.
PICTURE
POSITIO N
LANGUAGE
DISPLAY...

Settings
ENGLISH  27
Sub-menu
Main menuE
N TER
M ENU
PICTURE
POSITION
LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
SECURITY
NETWORK 
SUB MENU
Select the required sub-menu item and press  ENTER to 
display the detailed menu.
 PICTURE menu
S-VIDEO/VIDEO/RGB  (Moving image)*1/YPBPR signal 
is input.
Sub-menu item DefaultPage
PICTURE MODE STANDARD28
CONTRAST 028
BRIGHTNESS 028
COLOR 029
TINT 029
SHARPNESS 029
COLOR TEMPERATURE DEFAULT29
DAYLIGHT VIEW AUTO29
NOISE REDUCTION*
2OFF 29
TV-SYSTEM*
2AUTO 29
RGB/YP...

Settings
28  ENGLISH
Menu operation (continued)
 PROJECTOR SETUP menu
Sub-menu itemDefaultPage
STATUS —36
NO SIGNAL SHUT-OFF DISABLE37
INITIAL START UP LAST MEMORY37
INSTALLATION FRONT/DESK37
HIGH ALTITUDE MODE OFF37
STANDBY MODE ECO37
LAMP POWER NORMAL37
LAMP RUNTIME —38
EMULATE DEFAULT38
FUNCTION BUTTON STATUS38
AUDIO SETTING —38
TEST PATTERN —39
INITIALIZE ALL —39
 SECURITY menu
Sub-menu item DefaultPage
PASSWORD OFF40
PASSWORD CHANGE —40
TEXT DISPLAY OFF40
TEXT CHANGE —40
MENU LOCK OFF41
MENU LOCK...

Settings
ENGLISH  29
Menu operation (continued)
 
▌COLOR
You can adjust the color saturation of the projected 
image. (For S-VIDEO/VIDEO/RGB  (Moving image)/
YP
BPR input signal only)
Lighter 
 Changesetting Change
setting Darker
 
▌TINT
You can adjust the skin tone of the projected image. 
(For S-VIDEO/VIDEO/RGB  (Moving image)/YP
BPR 
input signal only)
More reddish 
 Changesetting Change
setting More greenish
 
▌SHARPNESS
You can adjust the sharpness of the projected image.
Less sharp 
 Changesetting...

Settings

30  ENGLISH

Menu operation (continued)
 
▌RGB/YPBPR
(For RGB/YPBPR input signal only)
Select the signals to be input to the  COMPUTER 1 IN 
and COMPUTER 2 IN terminals.
Change setting 

 Changesetting Change
setting
 Change setting

AUTO
Automatic adjustment
RGB For RGB signals
YP
BPRFor YPBPR signals
NOTE:
AUTO
•	  mode is selected by default.
Select 
•	 RGB or YP
BPR according to the input signal if the 
image is not normally projected during  AUTO mode.
The function only becomes effective...