Panasonic LCD Projector PT-LB10NTU PT-LB10U PT-LB10VU PT-LB10SU Operating Instructions

ENGLISH-31
Useful functions
ENTER
PROJECTOR VOLUME D.ZOOMSTDMENU
AUTO
SETUP
SHUTTERFREEZE
INDEX
WINDOW
Still
pictureMoving
picture
The remote control unit functions during INDEX WINDOW
Press the For Gbutton to select a screen size.
It can switch to three stages.
Still
pictureMoving
pictureStill
pictureMoving
pictureStill
pictureMoving
picture
Press the I I
or H H
button to switch between the still picture screen
and moving picture screen.
Press the ENTER button to capture the present moving picture in a...

32-ENGLISH
On-screen menus
Menu screens
The various settings and adjustments for
this projector can be carried out by
selecting the operations from on-screen
menus.
The general arrangement of these menus
is shown below.
MAIN MENU
       MENU
KEYSTONE
PICTURE
POSITION
INDEX WINDOW
SHUTTER
VOLUME
LANGUAGE
OPTION1
OPTION2
SECURITY
NETWORK
SELECT
  ENTER  EXIT
       PICTURE
PICTURE MODE DYNAMIC
CONTRAST      32
BRIGHT        32
SHARPNESS      0
COLOR TEMP.  STANDARD
W-BAL R       32
W-BAL G       32
W-BAL B...

ENGLISH-33
Adjustments and settings
POSITION menu (page 40)
When an RGB/YP
BPRsignal
is being input       OPTION1
OSD             ON
AUTO SEARCH     ON
AUTO SIGNAL     ON
AUTO KEYSTN     ON
RGB/YP
BPR      AUTO
VGA60/480p     480p
SXGA MODE      SXGA
NR              OFF
BLACKBOARD      OFF
  SELECT  ADJ    RETRN
OPTION1 menu (page 43)
       OPTION2
BACK COLOR     BLUE
FRONT/REAR    FRONT
DESK/CEILING   DESK
FAN CONTROL  STANDARD
LAMP POWER     HIGH
LAMP RUNTIME   10H
FUNC 1        INDEX
CONTROL KEY...

34-ENGLISH
#Press the MENU button.
The “MAIN MENU”
will be displayed.
$Press the F F
or G G
button to select an item.
Selected item will
be displayed in
blue.
%Press the ENTER button to accept the
selection.
The selected
menu screen or
adjustment
screen will then
be displayed.
(Example:
“PICTURE”
menu)
ENTER
FREEZE
SHUTTER
INDEX
WINDOW
PROJECTOR VOLUME D.ZOOMSTD VIDEOINPUT POWER
RGB
AUTO
SETUPMENU
Menu operation guide
       MENU
KEYSTONE
PICTURE
POSITION
INDEX WINDOW
SHUTTER
VOLUME
LANGUAGE
OPTION1...

ENGLISH-35
Adjustments and settings
&Press the F F
or G G
button to select
an item, and then press the I I
or
H H
button to change or adjust the
setting.
An individual adjustment screen
such as the one shown below will
be displayed for bar scale items.
The bar scale will turn green when
any adjustment changes the setting
from the factory set value.Unavailable on-screen
menu items
This projector has unadjustable
items and unusable functions
depending on the signal being
input.
When an item cannot be...

36-ENGLISH
Correcting keystone distortion
Keystone distortion is corrected automatically when the projector’s automatic
setup function is used, but this correction will not apply if the screen itself is
tilted. In such cases, you can correct the keystone distortion manually with
the following procedure.
Vertical
keystone
distortion
correction
OperationPress the H H
button.Press the I I
button.
KEYSTONE       0
NOTE:
BIf you press the AUTO SETUP button after correcting the keystone
distortion manually,...

ENGLISH-37
Adjustments and settings
Press the For Gbutton on the
projector or remote control unit to
select an item, and then press the
Ior Hbutton to change the
setting.
For items with bar scales, press the
ENTER button or the Ior Hbutton
to display the adjustment screen,
and then press the Ior Hbutton
to make the adjustment.When an S-VIDEO/VIDEO signal is
being input
Adjusting the picture
       PICTURE
PICTURE MODE DYNAMIC
CONTRAST      32
BRIGHT        32
SHARPNESS      0
COLOR TEMP.  STANDARD
W-BAL...

38-ENGLISH
CONTRAST
This adjusts the contrast of the
picture. (Adjust the “BRIGHT”
setting first if required before
adjusting the “CONTRAST” setting.)
The picture is bright: Ibutton
The picture is dark: Hbutton
BRIGHT
This adjusts the darker areas (black
areas) in the picture.
Black areas are too light: Ibutton
Dark areas are too solid: Hbutton
COLOR
(S-VIDEO/VIDEO/YPBPRonly)
The color is too deep: Ibutton
The color is too pale: Hbutton
TINT
(NTSC/NTSC 4.43/YPBPRonly)
This adjusts the flesh tones in the...

SIGNAL MODE
(RGB/YPBPR/NETWORK only)
This displays the type of signal
which is currently being projected.
Refer to the list on page 60 for
details on each type of signal.
sRGB is an international color
reproduction standard (IEC61966-2-
1) established by the International
Electrotechnical Commission (IEC).
If you would like the colors in sRGB-
compatible pictres to be reproduced
more faithfully, make the following
settings.
#Press the F F 
 
or G G 
 
button to
select “PICTURE MODE”, and
then press theI...

40-ENGLISH
Press the For Gbutton on the
projector or remote control unit to
select an item, and then press the I
or Hbutton to change the setting.
For items with bar scales, press the
ENTER button or the Ior Hbutton
to display the adjustment screen,
and then press the Ior Hbutton
to make the adjustment.
When an RGB/YP
BPRsignal is
being input 
When an S-VIDEO/VIDEO signal is
being input
POSITION
Moves the picture position.
Press the ENTER button to display the
“POSITION” screen.
Press the Ior Hbutton to...