Panasonic LCD Projector PT-EX16KE PT-EX16KU Operating Instructions

[Setting] menu
ENGLISH - 61
Settings
[Lamp interval]
Sets the replacement cycle when [Lamp select] is set 
to [2-Lamps]. After the replacement cycle, the lamp for 
use is automatically changed.
 zThe set time here is a guideline time.
1) Press 
▲▼ to select [Lamp interval].
2)  
Press the  button.
3)

 
Press  ▲▼ to select an item.
[Off]
Does not change lamps.
[24   H]/
[200
  H]/
[500
  H]/
[1000
  H]/
[2000
  H] Changes lamps in the set intervals.
 z
When the set time is reached, 
the projector lights...

[Setting] menu
62 - ENGLISH
Settings
■
■ To display the test pattern
1) Press 
▲▼ to select [T
est pattern].
2)  
Press the  button.
3)

 
Press  ▲▼ to switch the setting.
■z
Press the  button to end the edit 
mode.
[Off]
Clears display of test pattern.
[On] Displays the test pattern.
■
■ Not to display the menus
The settings screen and lines are cleared 
temporarily.
1) Press 
▲▼ to select [Menu off].
2)  
Press the  button.
■z Press any button to return to the setting screen.
■
■ To reset a value...

[Setting] menu
ENGLISH - 63
Settings
■
■ To display the test pattern
1) Press 
▲▼ 
to select [Auto test pattern].
2)  
Press the  button.
3)

 
Press  ▲▼ to switch the setting.
■z
Press the  button to end the edit 
mode.
[Off]
Clears display of test pattern.
[On] Displays the test pattern.
■
■ To reset a value during 
adjustment 
The setting returns to its value before adjustment.
The value returns to the standard value stored in 
[Store].
1) Press 
▲▼ to select [Reset].
2)  
Press the  button.
■z A...

[Setting] menu
64 - ENGLISH
Settings
■
■ To check [Measured]
Displays data for R/G/B.
1) Press 
▲▼ to select the color ([Red]/
[Green]/[Blue] in [Measured]) to be 
measured.
2)
 
Press the  button.
3)

 
Press  ▲▼ to change the value, and 
press  ◀▶ to move between digits.
■z
The numerical values can also be entered using 
the number (-) buttons of the remote 
control.
Color xyL
[Red]
0.000 - 1.000 0.000 - 1.000 0.000 - 1.000
[Green]0.000 - 1.000 0.000 - 1.000 0.000 - 1.000
[Blue]0.000 - 1.000 0.000 -...

[Setting] menu
ENGLISH - 65
Settings
■
■ To register adjusted content you 
have changed
Registers values after adjustment.
1) Press 
▲▼ to select [Store].
2)  
Press the  button.
3)

 
Select [Y
 es], and press the  
button.
■
■ To display the test pattern
1) Press 
▲▼ to select [T
est pattern].
2)  
Press the  button.
■z Displays the test pattern selection screen.
3) Press 
▲▼ to select the test pattern to 
be displayed, and press the  
button.
■z The selection screen is cleared and the test 
pattern is...

[Setting] menu
66 - ENGLISH
Settings
[Logo]
Sets logo selection and the PIN code for logo 
selection.
1) Press ▲▼ to select [Logo].
2)  
Press the  button.
■z The sub menu 2 is displayed.
3) Press 
▲▼ to switch the setting.
■
■ [Logo select]
1) Select [Logo select], and press the 
 button.
2)
 
Press  ▲▼ to switch the setting.
■z
The setting will change as follows each time 
you press the button.
[Off][User]*1[Default]
[Off]
Clears logo from screen.
[User]
*1Displays the image registered by the 
user....

[Setting] menu
ENGLISH - 67
Settings
[Fan control]
The projector controls the rotation of the fan 
automatically. You can make the rotation of the fan 
stronger depending on the ambient temperature or 
where the projector is installed (for example, when it 
is to be used at a high altitude).
1) Press ▲▼ to select [Fan control].
2)  
Press the  button.
■z ▲▼  are displayed over the sub menu 2.
3) Press 
▲▼ to switch the setting.
[Normal][Max]
[Normal] Controls the fan operation 
automatically.
[Max]...

[Setting] menu
68 - ENGLISH
Settings
[Power management]
1) Press ▲▼ to select [Power 
management].
2)
 
Press the  button.
■z The sub menu 2 is displayed.
3) Press 
▲▼ to switch the setting.
[Off] Cancels power management 
function.
[Ready] Turns off the lamps and starts 
cooling when the time set using 
[Timer] has elapsed. While lamp is 
being cooled, the standby indicator 
, and the power 
indicator  are flashing, 
you cannot operate the projector.
When lamp cooling has finished, 
the power indicator...

[Setting] menu
ENGLISH - 69
Settings
[Security]
Locks projector operations using button locking and 
the PIN code.
1) Press ▲▼ to select [Security].
2)  
Press the  button.
■z The sub menu 2 is displayed.
3) Press 
▲▼ to select an item.
■
■ [Key lock]
Locks the control buttons to prevent mistaken 
operations of the projector.
1) Select [Key lock], and press the 
 button.
■z
▲▼  are displayed over the sub menu 2.
2) Press 
▲▼ to switch the setting.
■z
The setting will change as follows each time 
you...

[Setting] menu
70 - ENGLISH
Settings
■
■ [PIN code change]
Changes the logo PIN code.
1) Select [PIN code change], and press 
the  button.
■z
The PIN code input screen is displayed.
2) Press 
▲▼◀▶  or the number ( - 
) buttons to enter the PIN code.
3)
 
Press  ▲▼◀▶  to select [Set].
4)

 
Press the  button.
■z If the PIN code is accepted, the new logo PIN 
code is displayed on the screen.
5) Press 
▲▼◀▶  or the number ( - 
) buttons to set your new PIN code.
6)
 
Press the  button.
7)

 
Select [Y
 es],...