Panasonic LCD Projector PT-EX16KE PT-EX16KU Operating Instructions

Technical Information
ENGLISH - 91
Appendix
6) Then use [Lens shift] to overlap the shaded areas.
■zThe red line will turn yellow if it is overlapped correctly .
Line (yellow)Frame (green): Pro\jje\fted image
E\bit
Edge blending
On
On All
Left
Right
Top
Bottom
Bla\fk level
Test pattern
Menu off Start
Width
Start
Width
Start
Width
Start
Width
All
Reset Ba\fk
Ne\bt
Move
Ba\fk E\bit
Edge blending
On
On All
Left
Right
Top
Bottom
Bla\fk level
Test pattern
Menu off Start
Width
Start
Width
Start
Width
Start...

Technical Information
92 - ENGLISH
Appendix
■zAdjusting colors with a colorimeter
1)  
T
 urn [Advanced color matching] to [On].
2)
 
Select [T
 est pattern] and press the  button.
■zDisplays the test pattern selection screen.
3) Select [Red] (or [Green], [Blue]) from [Measured] and press the  button.
■zThe test pattern is displayed.
Measured Test pattern
Exit
Target
Red
Green B\fue
Red
Green B\fue
Cyan
Magenta
Ye\f\f\bwWhite
4) Measure the chromaticity coordinates (x, y) and luminance (Lx) using the...

Technical Information
ENGLISH - 93
Appendix
Label notifying registration of password
Apply the supplied label to the projector in a visible location when the password is registered and valid.
PJLink
This projector complies with Class1 as defined by JBMIA (Japan Business Machine and Information System 
Industries Association) PJLink standards. This projector is compatible with all commands defined by PJLink 
Class1, and verifies that it complies with Class1 standards defined by PJLink.
Projector input...

Technical Information
94 - ENGLISH
Appendix
■
■ PJLink
The PJLink subcommittee was established within the Data Projector Group in September 2003. The new PJLink 
interface specification for projectors was stipulated by the PJLink subcommittee as part of its first year of activities.
PJLink is a unified standard for the control and management of projectors.
The standard allows centralized management of projectors and operation with a controller, regardless of manufacturer.
JBMIA aims to provide early...

Technical Information
ENGLISH - 95
Appendix
■
■ Transmission conditions
Signal level
RS-232C-compliant Character length 8 bits
Sync. method Asynchronous Stop bit1 bit
Baud rate 19 200 bps
*1X parameterNone
Parity None S parameterNone
*1: Fixed to 9 600 bps when [AMX D. D.] is set to on.
■
■ Basic format
Transmission from the computer begins with STX, then the ID, command, parameter, and ETX are sent in this 
order. Add parameters according to the details of control.
(2 bytes)
2 ID 
characters (2 byte\os)...

Technical Information
96 - ENGLISH
Appendix
■
■ List of commands
The following list shows commands to control the projector via a computer
.

CommandControl detailsNote (parameters)
PON Power on To check if the power is on, use the “Check power status” command.
POF Power standby
QPW Check power status 000 = Standby
 
001 = Power on
IIS Switch input signal VID = Input 2 - video
SVD = Input 2 - S-video
RG1 = Input 1 - RGB (PC analog)
RG2 = Input 2 - RGB
DVI = Input 2 - RGB (PC digital)
HD1 = Input 1 -...

Technical Information
ENGLISH - 97
Appendix
Other terminals
■
■  terminal pin assignments and signal names
Outside view Pin No. Signal name
(1)
(2)
(3)
(4)(1)
GND (luminance signal)
(2) GND (color signal)
(3) Luminance signal
(4) Color signal
■
■  terminal pin assignments and signal names
Outside view Pin No. Signal name
(4) is not used.
(5) to (8), (10), and (11) are GND 
terminals.
(10)(6)
(11)
(15)
(1)
(5)
(1)
R
(2) G
(3) B
(9) +5 V
(12) DDC data
(13) HD/SYNC
(14) VD
(15) DDC clock
■
■  terminal pin...

Technical Information
98 - ENGLISH
Appendix
■
■  terminal pin assignments and signal names
Outside view Pin No. Signal name Pin No. Signal name
(24)
(17) (16)
(9)
(8)
(1)
(1)
T.M.D.S data 2 - (13)–
(2) T.M.D.S data 2 + (14)+5 V
(3) T.M.D.S data 2/4
shield (15)
GND
(4) –(16)Hot plug detection
(5) –(17)T.M.D.S data 0 -
(6) DDC clock (18)T.M.D.S data 0 +
(7) DDC data (19)T.M.D.S data 0/5
shield
(8) –(20) –
(9) T.M.D.S data 1 - (21)–
(10) T.M.D.S data 1 + (22)T.M.D.S clock
shield
(11) T.M.D.S data 1/3
shield...

Technical Information
ENGLISH - 99
Appendix
 List of compatible signals
The following table specifies the types of signal compatible with the projector.
■
■ When the signal is analog
Screen display
Resolution*1Scanning frequency Dot clock
mode (dots)Horizontal (kHz) Vertical (Hz)frequency (MHz)
VGA 1 640 x 480 31.47059.88025.149
VGA 2 720 x 400 31.47070.09028.322
VGA 3 640 x 400 31.47070.09025.175
VGA 4 640 x 480 37.86074.38031.500
VGA 5 640 x 480 37.86072.81031.500
VGA 6 640 x 480 37.50075.00031.500
VGA...

Technical Information
100 - ENGLISH
Appendix
Screen displayResolution*1Scanning frequency Dot clock
mode (dots)Horizontal (kHz) Vertical (Hz)frequency (MHz)
SXGA 17 1 152 x 900 61.85066.00094.500
SXGA 18 1 280 x 1 024i 46.43086.70078.745
SXGA 19 1 280 x 1 024 63.79060.180108.190
SXGA 20 1 280 x 1 024 91.14685.024157.500
SXGA+ 1 1 400 x 1 050 63.97060.190107.990
SXGA+ 2 1 400 x 1 050 65.35060.120122.850
SXGA+ 3 1 400 x 1 050 65.12059.900122.430
SXGA+ 4 1 400 x 1 050 64.03060.010108.160
SXGA+ 5 1 400 x 1...