Panasonic LCD Projector PT-EX16KE PT-EX16KU Operating Instructions

Technical Information
ENGLISH - 101
Appendix
■
■ When the signal is digital
Screen display
Resolution*1Scanning frequency Dot clock
mode (dots)Horizontal (kHz) Vertical (Hz)frequency (MHz)
D-VGA 640 x 480 31.47059.94025.175
D-480i*2720 (1 440) x 480 15.73459.94027.000
D-576i*2720 (1 440) x 576 15.62550.00027.000
D-480p 720 x 480 31.47060.00027.000
D-576p 768 x 576 31.25050.00027.000
D-SVGA 800 x 600 37.87960.32040.000
D-XGA 1 024 x 768 43.36360.00065.000
D-WXGA 1 1 366 x 768 48.36060.00086.670
D-WXGA 2 1...

Specifications
102 - ENGLISH
Appendix
Specifications
The following table describes the specifications of the projector.
Model No.PT-EX16KE/PT-EX16KU
Power supply AC
  220   V - 240   V  
50
   Hz/60   Hz
Power consumption 220
  V - 240   V 11  
A
  1   850   W
When [Lamp power] in the [Setting] menu is set to eco-mode: 1
  450   W
Standby: 18 W
LCD panel Size
4.57 cm (1.8") (aspect ratio 4:3)
Display systemThree transparent LCD panels (RGB)
Drive system Polysilicon TFT active matrix system
Number of...

Specifications
ENGLISH - 103
Appendix
Model No.PT-EX16KE/PT-EX16KU
Power cable length 3.0 m (118-1/8")
Outer case Molded plastic
Dimensions Width: 650 mm (25-5/8")
 
Height: 349 mm (13-3/4") (feet fully retracted)
Depth: 815 mm (32-1/8") (feet fully retracted, not including lens)
W

eight Approx. 46.5 kg (102.5 lbs.)
Operating environment Operating environment temperature
*1: 5°C (41°F) to 40°C (104°F)
Operating environment humidity: 20% to 80% (no condensation)
Remote 
control Power...

Dimensions
104 - ENGLISH
Appendix
Dimensions

815.0 (32-3/32)
349.0 (13-3/4)349.0 (13-3/4)
144.0 (5-21/32)143.0 (5-5/8)82.0 (3-7/32)25.0 (31/32)
35.0 (1-3/8)
3º
301.0 (11-27/32)
48.0

(1-7/8)
25.0 (31/32)
650.0 (25-19/32)
188.5 (7-13/32) 198.5 (7-13/16)
224.0 (8-13/16)
* Actual dimension may dif fer depending on the product. 

Ceiling mount bracket safeguards
ENGLISH - 105
Appendix
Ceiling mount bracket safeguards
 zInstallation work of the ceiling mount bracket should only be performed by a qualified technician.
 zPanasonic takes no responsibility for any damage to the projector resulting from use of a ceiling mount bracket 
not manufactured by Panasonic or the inappropriate choice of location for installation, even if the warranty 
period of the projector has not expired.
 zAn unused ceiling mount bracket must be removed...

Notes on attaching the lens
106 - ENGLISH
Appendix
The technical staff or service personnel must attach the lens according to the instruction manual supplied with the 
optional lens.
 zUse the light-shielding plates, lens attachment, spacer

, and lens lock lever fixing bracket supplied with the 
projector when attaching the lens. For details, refer to the instruction manual supplied with the optional lens.
Lens specifications
Refer to the following tables for the lens specifications.
All measurements in...

Notes on attaching the lens
ENGLISH - 107
Appendix
■
■ Light-shielding plate for each lens
Three types of light-shielding plates are supplied with the projector
. Use the light-shielding plate that corresponds 
to the appropriate lens. Refer to the following table.
Accessory (product name) Lens Product No.Attention
 zThe light-shielding plate-2 and light-shielding 
p

late-3 should be separated to the upper and lower 
plates.
Upper plate
Lower plate
Light-shielding plate-1
(6103379906)ET-ELW03*1...

Information for Users on Collection and Disposal of Old Equipment and used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that used 
electrical and electronic products and batteries should not be mixed with general household 
waste. For proper treatment, recovery and recycling of old products and used batteries, please 
take them to applicable collection points, in accordance with your national legislation and the 
Directives 2002/96/EC and 2006/66/EC.
By disposing...