Panasonic Kx Th112 Operating Instructions Manual

							Using a Cellular Phone with this Unit
For assistance, please visit http://www.panasonic.com/phonehelp61
Making/answering calls 
using a cellular line
LBefore making or answering calls, confirm 
that you have connected your cellular 
phone to the base unit (page 60).
Making calls Y^
1Dial the phone number. i {CELL}
LIf you registered only one cellular 
phone, skip to step 4.
2Select the desired cellular phone.
3{SELECT}
4When you finish talking, press {OFF}.
Important:
LBefore making a call, check which 
CELLULAR SELECT number the 
cellular phone you want to use is 
registered to. Confirm by pressing the 
CELLULAR SELECT button to display 
the registered cellular phone’s name.
1Dial the phone number.
2Press the desired CELLULAR SELECT 
button ({1} to {5}).
3When you finish talking, press {SP-
PHONE}.
Note for handset and base unit:
LIf the phone numbers include a “;”, a 
“#”, or a “Pause”, you cannot make a call 
using a cellular line.
Answering calls Y^
When a cellular phone connected to the base 
unit receives a call, 
[ shown in the top 
center of the display flashes rapidly.
1Press {C} or {CELL}.
2When you finish talking, press {OFF}.
When a cellular phone is connected and the 
base unit receives a call, the corresponding 
CELLULAR SELECT button flashes rapidly.
1Press {SP-PHONE} or the CELLULAR 
SELECT button ({1} to {5}) that is 
flashing.
2When you finish talking, press {SP-
PHONE}.
Note for handset and base unit:
LWhen you receive a call from a land line 
and a cellular line at the same time, press 
{CELL} on the handset or the CELLULAR 
SELECT button that is flashing on the 
base unit to answer the cellular call.
LIf the line selection mode for land line is set 
to “
Line1” or “Line2”, press {CELL} on 
the handset or the CELLULAR SELECT 
button that is flashing on the base unit to 
answer the cellular call.
Making calls using the 
phonebook Y^
1{MENU} (center of joystick) i d 
i {SELECT}
2Push {^} or {V} to select the desired item.
3{CALL} i {CELL}
LIf you registered only one cellular 
phone, skip to step 5.
4Select the desired cellular phone. i 
{SELECT}
5When you finish talking, press {OFF}.
Handset
Base unit
Handset
Base unit
Handset
TH112(e).book  Page 61  Tuesday, July 18, 2006  3:54 PM 
						

							Using a Cellular Phone with this Unit
62For assistance, please visit http://www.panasonic.com/phonehelp
1{MENU} i d i {SET}
2Press {^} or {V} to select the desired 
item.
3Press the desired CELLULAR SELECT 
button ({1} to {5}).
4When you finish talking, press {SP-
PHONE}.
Note for handset and base unit:
LIf the phone numbers stored in the 
phonebook include a “Pause” or a 
“Flash”, you cannot make a call using a 
cellular line.
Viewing the caller list and 
calling back Y^
If you receive a call via cellular line, caller 
information is logged in the caller list with 
y.
1{MENU} (center of joystick) i G 
i {SELECT}
2Push {^} or {V} to select the desired 
caller information.
3{CALL} i {CELL}
LIf you registered only one cellular 
phone, skip to step 5.
4Select the desired cellular phone. i 
{SELECT}
5When you finish talking, press {OFF}.
Note:
LIf the cellular line is already being used 
or you want to select the land line, select 
the desired line by pressing {LINE1} or 
{LINE2} instead of {CELL}.
1{MENU} i G i {SET}
2Press {^} or {V} to select the desired 
caller information.
3Press the desired CELLULAR SELECT 
button ({1} to {5}).
LWhen you call back the caller 
information indicated by y, if you 
press {SP-PHONE}, select the 
desired cellular phone. i {SET}
4When you finish talking, press {SP-
PHONE}.
Note:
LIf the cellular line is already being used 
or you want to select the land line, select 
the desired line by pressing {LINE1} or 
{LINE2} instead of pressing the desired 
CELLULAR SELECT button ({1} to {5}).
Calling back during playback (Caller ID 
subscribers only)
If Caller ID information was received for 
the call, you can call the caller back using 
the cellular line while listening to the 
message. 
1Press {CALL}, then press {CELL} 
during playback.
LIf you registered only one cellular 
phone, skip to step 3.
2Select the desired cellular phone. i 
{SELECT}
3When you finished talking, press 
{OFF}. 
1Press the desired CELLULAR SELECT 
button ({1} to {5}) during playback. 
2When you finished talking, press {SP-
PHONE}.
Base unit
Handset
Base unit
Handset
Base unit
TH112(e).book  Page 62  Tuesday, July 18, 2006  3:54 PM 
						

							Using a Cellular Phone with this Unit
For assistance, please visit http://www.panasonic.com/phonehelp63
Useful features during a 
cellular call
Putting a cellular call on hold 
Y^
Press {HOLD} 2 times during a cellular 
call.
LTo return to the call, press {C}.
Press {HOLD} during a cellular call.
LTo return to the call, press the 
CELLULAR SELECT button ({1} to {5}) 
that is flashing.
Note for handset and base unit:
LIf a call is kept on hold for more than 6 
minutes, an alarm tone starts to sound. 
After 4 additional minutes on hold, the 
call is disconnected.
Using the land line during a 
cellular call 
Y^
Holding a cellular call to make or 
answer a land line call
Example: If you are on a cellular line call
1To put the cellular call on hold, press 
{HOLD} 2 times.
2To make a land line call, dial the phone 
number, then press {LINE1} or 
{LINE2}.
To answer a land line call, press 
{LINE1} or {LINE2}.
3When you finish talking, press {OFF} to 
end the land line call.
4To return to the cellular call, press 
{C}.
1To put the cellular call on hold, press 
{HOLD}.
2To make a land line call, dial the phone 
number, then press {LINE1} or 
{LINE2}.
To answer a land line call, press 
{LINE1} or {LINE2}.
3When you finish talking, press {SP-
PHONE} to end the land line call.
4To return to the cellular call, press the 
CELLULAR SELECT button ({1} to {5}) 
that is flashing.
Holding a land line call and make or 
answer a cellular call
Example: If you are on a land line call
1To put the land line call on hold, press 
{HOLD} 2 times.
2To make a cellular call
– If you have registered only one 
cellular phone, dial the phone 
number, then press {CELL}.
– If you have registered more than one 
cellular phone, dial the phone 
number, then press {CELL}. Select 
the desired cellular phone, then press 
{SELECT}.
To answer a cellular call
Press {CELL}.
LTo hold the cellular call, press 
{HOLD} 2 times.
3To return to the land line call, press 
{LINE1} or {LINE2} that is flashing on 
the handset.
Handset
Base unit
Handset
Base unit
Handset
TH112(e).book  Page 63  Tuesday, July 18, 2006  3:54 PM 
						

							Using a Cellular Phone with this Unit
64For assistance, please visit http://www.panasonic.com/phonehelp
1To put the land line call on hold, press 
{HOLD}.
2To make a cellular call
Dial the phone number, then press the 
desired CELLULAR SELECT button 
({1} to {5}).
To answer a cellular call
Press the CELLULAR SELECT button 
({1} to {5}) that is flashing.
LTo hold the cellular call, press 
{HOLD}.
3To return to the land line call, press 
{LINE1} or {LINE2} that is flashing on 
the base unit.
Cellular settings
Important:
LYou must register your cellular phone to 
the base unit before programming.
Ringer settings for cellular calls 
Y^
Ringer volume
You can change the ringer volume heard 
when a cellular call is received. You can 
change it for the handset and base unit 
individually.
1{MENU} (center of joystick) i f 
i {SELECT}
2“Ringer for cell” i {SELECT}
3“Ringer volume” i {SELECT}
4Select the desired volume. (Default: 
High) i {SAVE} i {OFF}
1{MENU} i f i {SET}
2“Ringer for cell” i {SET}
3“Ringer volume” i {SET}
4Select the desired volume. (Default: 
High) i {SET} i {STOP}
Note for handset and base unit:
LWhen the ringer volume is set to off for a 
cellular line, “Ringer off” is not 
displayed in standby mode and the 
handset or base unit does not ring for 
cellular calls.
Base unit
Handset
Base unit
TH112(e).book  Page 64  Tuesday, July 18, 2006  3:54 PM 
						

							Using a Cellular Phone with this Unit
For assistance, please visit http://www.panasonic.com/phonehelp65
Ringer tone
You can change the ringer tone heard 
when a cellular call is received. You can 
change it for the handset and base unit 
individually.
1{MENU} (center of joystick) i f 
i {SELECT}
2“Ringer for cell” i {SELECT}
3“Ringer tone” i {SELECT}
4Select the desired item. (Default: “Tone 
3”) i {SAVE} i {OFF}
Note:
LIf you erase a customized ring for 
cellular call, “Tone 3” (default) is used 
instead of that ringer tone.
1{MENU} i f i {SET}
2“Ringer for cell” i {SET}
3“Ringer tone” i {SET}
4Select the desired item. (Default: “Tone 
3”) i {SET} i {STOP}
Selecting which unit to ring ^
You can select which handset or base unit 
rings when you receive a call from one of 
the registered cellular phones.
1Press the desired CELLULAR SELECT 
button ({1} to {5}).
2“Assign Base/HS” i {SET}
3Select the desired unit, then press {>}. 
(Default: “All”)
LThe selected units are indicated by 
“Q”.
LTo cancel a selected unit, press {>} 
again.
4{SET} i {STOP}
Answering system settings for 
cellular calls ^
Setting the answering system for a 
cellular call
This feature allows the base unit to answer 
cellular calls when you are not available to 
answer cellular calls.
Important:
LTo use this feature, you need to turn on 
the answering system for line 1 and/or 
line 2 (page 50).
LIf this feature is turned on, the base unit 
plays the greeting message for line 1 
and message is recorded on line 1.
1{MENU} i A i {SET}
2“TAD for cell” i {SET}
3“TAD (cell)” i {SET}
4Select the desired setting. (Default: 
“Off”) i {SET} i {STOP}
Note:
L“TAD” stands for Telephone Answering 
Device.
Handset
Base unit
TH112(e).book  Page 65  Tuesday, July 18, 2006  3:54 PM 
						

							Using a Cellular Phone with this Unit
66For assistance, please visit http://www.panasonic.com/phonehelp
Ring count
You can change the number of times the 
cellular phone rings before the base unit 
answers cellular calls.
1{MENU} i A i {SET}
2“TAD for cell” i {SET}
3“TAD ring count” i {SET}
4Select the desired number. (Default: “4 
rings”) i {SET} i {STOP}
Turning on the discoverable 
mode ^
When discoverable mode is turned on, this 
unit may be seen by other Bluetooth 
devices.
1{MENU} i h i {SET}
2“Bluetooth” i {SET}
3“Discoverable” i {SET}
4Select the desired setting. (Default: 
“Off”) i {SET} i {STOP}
Transferring a cellular 
call
Cellular calls can be transferred between 
the handset and the base unit, and 
between the handset and another 
compatible Panasonic handset (KX-
THA19). You can also switch a cellular call 
between a cellular phone and base unit.
Transferring a cellular call 
Y^
1During a cellular call, press 
{INTERCOM} to put the call on hold.
2To page the base unit, press {0}.
To page another handset, enter its 
extension number ({1} to {8}).
LIf you do not wish to announce the 
transfer, skip to step 4.
3Wait for the paged party to answer.
LIf the paged party does not answer, 
press {C} to return to the cellular 
call.
4To complete the transfer, press {OFF}.
1During a cellular call, press 
{INTERCOM} to put the call on hold.
2To page a handset, enter its extension 
number ({1} to {8}).
To page all handsets, press {0}.
LIf you do not wish to announce the 
transfer, skip to step 4.
3Wait for the paged party to answer.
LIf the paged party does not answer, 
press the CELLULAR SELECT 
button ({1} to {5}) that is flashing to 
return to the cellular call.
Handset
Base unit
TH112(e).book  Page 66  Tuesday, July 18, 2006  3:54 PM 
						

							Using a Cellular Phone with this Unit
For assistance, please visit http://www.panasonic.com/phonehelp67
4To complete the transfer, press {SP-
PHONE}.
Note for handset and base unit:
LIf the paged party does not answer 
within 1 minute after you hang up, your 
extension rings and the call is returned 
to your phone. You can speak to the 
caller again by pressing {C} on the 
handset or the CELLULAR SELECT 
button ({1} to {5}) that is flashing on the 
base unit.
LTo transfer a cellular call to the 
answering system, see page 37.
Answering a transferred cellular 
call 
Y^
Press {C} to answer the page.
LAfter the paging party hangs up the call, 
you can take the transferred call.
Press {SP-PHONE} to answer the page.
LAfter the paging party hangs up the call, 
you can take the transferred call.
Note for handset and base unit:
LIf the paging party hangs up before you 
answer the page, “Incoming call” is 
displayed. Press {C} on the handset or 
the CELLULAR SELECT button ({1} to 
{5}) that is flashing on the base unit to 
take the transferred call.
Switching a cellular call 
between a cellular phone and 
the base unit ^
From a cellular phone to the base unit
If you answer a cellular call using a cellular 
phone, you can transfer it to the base unit.
1During a cellular call using your cellular 
phone, press the CELLULAR SELECT 
button ({1} to {5}) that is in use.
2“Transfer to base” i {SET}
3Follow the instructions of your cellular 
phone, if required.
LYou may need to enter the PIN (page 
47).
From the base unit to a cellular phone
If you answer a cellular call using the base 
unit, you can transfer it to the cellular 
phone that the call came in.
1During a cellular call using the base 
unit, press the CELLULAR SELECT 
button ({1} to {5}) that is in use.
2“Transfer to Cell” i {SET}
Handset
Base unit
TH112(e).book  Page 67  Tuesday, July 18, 2006  3:54 PM 
						

							Using a Cellular Phone with this Unit
68For assistance, please visit http://www.panasonic.com/phonehelp
Conference calls
Conference call with a cellular 
call and land line call 
Y^
While you are talking on a cellular call, you 
can make or answer a 2nd call on the land 
line, and then combine the calls to 
establish a conference call.
1During a cellular call, press {HOLD} 2 
times.
2To answer a land line call, press 
{LINE1} or {LINE2}.
To make a land line call, press {LINE1} 
or {LINE2}, then dial the phone 
number.
3When the land line call is connected, 
press {CONF} to make a conference 
call.
LTo hang up only one line, press the 
desired line button or {CELL} for the 
party with which you want to continue 
talking.
LTo put both lines on hold, press 
{HOLD}. To talk only with the land 
line caller, press the line button that is 
flashing. To talk only with the cellular 
caller, press {C}. To resume both 
lines, press {CONF}.
1During a cellular call, press {HOLD}.
2To answer a land line call, press 
{LINE1} or {LINE2}.
To make a land line call, press {LINE1} 
or {LINE2}, then dial the phone 
number.
3When the land line call is connected, 
press {CONF} to make a conference 
call.
LTo hang up only one line, press the 
desired line button or the desired 
CELLULAR SELECT button ({1} to 
{5}) for the party with which you want 
to continue talking.
LTo put both lines on hold, press 
{HOLD}. To talk with only land line 
caller, press the line button that is 
flashing. To talk only with the cellular 
caller, press the CELLULAR SELECT 
button ({1} to {5}) that is flashing. To 
resume both lines, press {CONF}.
Note for handset and base unit:
LWhile you are on a conference call using 
the cellular line, other units cannot join 
the conference call.
LWhile you are on a conference call using 
the cellular line, if you hang up the 
cellular line and return to the land line 
call, the “Call privacy” feature is turned 
on automatically. To turn this feature off, 
see page 39.
Conference call with a cellular 
call and an intercom call 
Y^
While you are talking on a cellular call, one 
more extension can join the conversation 
and establish a conference call.
1During a cellular call, press 
{INTERCOM}.
2To page the base unit, press {0}.
To page another handset, enter its 
extension number ({1} to {8}).
3When the paged party answers, press 
{CONF} to make a conference call.
LTo leave the conference, press 
{OFF}. The other 2 parties can 
continue the conversation.
Handset
Base unit
Handset
TH112(e).book  Page 68  Tuesday, July 18, 2006  3:54 PM 
						

							Using a Cellular Phone with this Unit
For assistance, please visit http://www.panasonic.com/phonehelp69
1During a cellular call, press 
{INTERCOM}.
2To page a handset, enter its extension 
number ({1} to {8}).
To page all handsets, press {0}.
3When the paged party answers, press 
{CONF} to make a conference call.
LTo leave the conference, press {SP-
PHONE}. The other 2 parties can 
continue the conversation.
Note for handset and base unit:
LThe cellular call can be put on hold by 
pressing {HOLD}. Only the person who 
placed the call on hold can resume the 
full conference by pressing {CONF} on 
the handset or {CONF} on the base unit.
Base unit
TH112(e).book  Page 69  Tuesday, July 18, 2006  3:54 PM 
						

							Useful Information
70For assistance, please visit http://www.panasonic.com/phonehelp
Headset (optional)
Setting up a Bluetooth wireless 
headset ^
If your headset is Bluetooth wireless 
technology compatible to this product, you 
can have a hands-free phone conversation 
by registering your headset to the base 
unit.
Important:
LThe following procedures must be 
performed using the base unit.
LThere can only be one active Bluetooth 
headset connection at a time.
Registering a headset
Important:
LFor more details, please visit: 
www.panasonic.com/
CompatibleCellPhones
1Your headset:
Enter the registration mode of your 
headset (each headset’s instructions 
vary).
2Base unit:
{MENU} i h i {SET}
3“Bluetooth” i {SET}
4“Headset” i {SET}
5“Registration” i {SET}
6Enter the PIN of your headset. (Refer to 
the operating instructions provided with 
your headset.) i {SET}Note:
LTo cancel a headset from the base unit, 
see “Deregistering another device” on 
page 49.
Selecting a headset
This setting determines which headset is 
active. Only 1 headset can be active at a 
time. When “No headset” is selected, the 
headset feature is turned off.
1{MENU} i h i {SET}
2“Bluetooth” i {SET}
3“Headset” i {SET}
4“Headset select” i {SET}
5Select the desired headset. i {SET} 
i {STOP}
Making calls
After dialing the phone number using the 
base unit, you can switch the call to the 
headset. Follow the instructions for your 
headset for further operations.
Answering calls
Refer to the operating instructions for your 
headset.
Switching a call between headset and 
base unit speakerphone
To switch to the base unit speakerphone, 
press {SP-PHONE}. 
To return to the headset, press {STOP}.
TH112(e).book  Page 70  Tuesday, July 18, 2006  3:54 PM