Panasonic Kx Tgl460 Operating Instructions Manual

1ME N (Redial/CID)
R If the caller list is displayed, press  ME N
(Redial/CID) again to switch to the
redial list.
2 Mb N: Select the desired entry.
3 n
To make a cellular call:
MCELL N
R The unit starts dialing
immediately in the following
situations.
– Only 1 cellular phone is
paired.
– A specific line is set to make cellular calls (page 19).
Mb N: Select the desired cellular
phone.  a M SELECT N
n To make a landline call:
M
/ Z N
Redial mode
You can change the redial list display order.
– “Most...

Adjusting the ringer volume
Handset
n While the handset is ringing for an
incoming call:
Press  Mj N or  Mk N repeatedly to select the
desired volume.
n While the handset is in standby mode:
Press  Mj N or  Mk N repeatedly to select the
desired volume for landline call.
R To turn the ringer off, press  Mk N repeatedly.
Base unit
n While the base unit is ringing for an
incoming call:
Press  Mj N or  Mk N repeatedly to select the
desired volume.
n While the base unit is in standby mode:
Press  Mj N or  Mk...

Note:
R MACCEPT N and  MFLASH N are soft keys
visible on the display during a call.
R Please contact your phone service provider
for details and availability of this service in
your area.
Temporary tone dialing for
landline calls (for rotary/pulse
service users)
Press  * (TONE) before entering access
numbers which require tone dialing.
Handset clarity booster
This feature can improve sound clarity when
the handset is used in an area where there
may be interference. During an outside call,
this feature...

Transferring calls, conferencecalls
Outside calls can be transferred or a
conference call with an outside party can be
made between 2 handsets.
1 During an outside call, press  MMENU N.
2 Mb N:  “Intercom ” a  M SELECT N
3 Mb N: Select  the  desired  unit.  a  M SELECT N
R If you select  “Voice paging ”, the
call will be switched from the
ear-receiver mode to the
speakerphone mode.
4 Wait for the paged party to answer.
RIf the paged party does not answer,
press  MBACK N to return to the outside
call.
5...

Answering a 2nd call during a cellular
call
1Press  MMENU N during a cellular call.
2 Mb N:  “Hold ” a  M SELECT N
3 To answer the 2nd call:
Press  M
/Z N or  MCELL N while the 2nd
call is being received.
4 To hang up the 2nd call and return to the
1st call (cellular call), press  MOFF N, then
press  MCELL N.*1
*1 If you press  MCELL N and the selection list
is displayed, select the desired cellular
line and press  MSELECT N.
Intercom
Intercom calls can be made between
handsets.
Note:
R When paging...

Call blockYou can press the  MC N (Call Block) key in the
following situations to disconnect the current
call and add a phone number to the call block
list:
– when an incoming call is being received
– when an incoming call is being recorded by the answering system
– when talking on an outside call
Once a phone number has been added to the
call block list, the unit will block calls from that
phone number in the future.
1 Press  MC N (Call Block) under the
situations shown above.
2 Confirm the call block...

nWhen a cellular phone is not paired:
1 ME N (Redial/CID)
R If the redial list is displayed, press
ME N (Redial/CID) again to switch to
the caller list.
2 Mb N: Select the desired entry to be
blocked.  a M MENU N
R To edit the number:  Mb N:  “Edit ” a
M SELECT N
Press  MEDIT N repeatedly until the
phone number is shown in the
10-digit format.  a M SAVE N a  M b N:
“ Call block ” a  M SELECT N a
Go to step 4.
3 Mb N:  “Save call block ” a
M SELECT N
4 Mb N:  “Yes ” a  M SELECT N
5 Edit the phone number...

Erasing all call block numbers
1MC N (Call Block)
2 Mb N:  “Block a single number ” or
“ Block range of numbers ” a
M SELECT N
3 MMENU N a  M b N:  “Erase all ” a
M SELECT N
4 Mb N:  “Yes ” a  M SELECT N
5 Mb N:  “Yes ” a  M SELECT N a  M OFF N
28For assistance, please visit http://shop.panasonic.com/support
Call Block

TGL46x(en)_1118_ver044.pdf   282015/11/18   9:33:31  

PhonebookYou can add 3,000 names (16 characters
max.) and phone numbers (24 digits max.) to
the phonebook, and assign each phonebook
entry to the desired group (page 30). The
following groups are available:
– Group 1:  “Home ”*1
 (default)
– Group 2:  “Cell 1 ”*1
– Group 3:  “Cell 2 ”*1
– Group 4-9: You can change the group name for each group.
*1 For groups 1-3, the group names cannot be changed.
Important:
R All entries can be shared by any registered
handset.
R You can copy phonebook entries from a...

5Continue from step 3, “Editing entries”,
page 31.
n When a cellular phone is not paired:
1 ME N (Redial/CID)
R If the redial list is displayed, press
ME N (Redial/CID) again to switch to
the caller list.
2 Mb N: Select the desired entry.  a
M MENU N
R To edit the number:
Mb N:  “Edit ” a  M SELECT N
Press  MEDIT N repeatedly until the
phone number is shown in the
desired format.  a M SAVE N a  M b N:
“ Phonebook ” a  M SELECT N a
Go to step 4.
3 Mb N:  “Save phonebook ” a
M SELECT N
4 Continue from...