Panasonic Kx Tgl460 Operating Instructions Manual

Battery charging
Charge for about 7 hours.
RConfirm  “Charging ” is displayed (
).
R When the batteries are fully charged,
“Fully charged ” is displayed.
Note when setting up
Note for connections
R The AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to...

Controls
Handset
Shoulder gripSpeakerMjN/MkN  (VOL.: Volume up/down)M/ZN  (TALK/Speakerphone)Dial keypad ( *: TONE)MicrophoneReceiverDisplayMOFF N ()Charge contacts
n Control type Soft keys
By pressing a soft key, you can select the
feature shown directly above it on the
display. After a cellular phone is paired,
M CELL N is displayed.
 Navigator key
– MD N,  MC N,  MF N, or  ME N: Scroll through
various lists and items.
– MD N (Mute): Put the call on mute.
– MF N W : View the phonebook entry.
– ME N...

MANSWER ON/OFF N
ANSWER ON/OFF indicator ()M LOCATOR N
R You can locate a misplaced handset
by pressing  MLOCATOR N.
MERASE N
Display icons/Indicators
Handset display items
ItemMeaning
Within base unit range
Out of base unit range
The landline is in use.
RWhen flashing:
The call is put on hold.
R When flashing rapidly: An
incoming call is now being
received.
A cellular line is in use. *1
R When flashing:
The cellular call is put on
hold.
R When flashing rapidly:
A cellular call is being
received.
Eco...

CELL indicators on the base unit
The CELL indicators show each cellular line
status.
StatusMeaning
OnA cellular phone is connected.
Ready to make/receive
cellular calls.
Flashing– The cellular line is in use.
– Phonebook entries arebeing copied from a
cellular phone (page 48).
– The base unit is searching for the paired cellular
phone.
– The base unit is pairing a cellular phone.
– A cellular call is put on hold.
Flashing
rapidlyA cellular call is being
received.
Light off– A cellular phone is not...

Note:
RWhen English is selected as the display
language, 12-hour clock format is used.
When Spanish is selected, 24-hour clock
format is used.
Recording your greeting
message
You can record your own greeting message
instead of using a pre-recorded greeting
message. See page 53 for details.
1 MMENU N#302
2 Mb N:  “Yes ” a  M SELECT N
3 Record a greeting message.  a M STOP N
a  M OFF N
Other settings
Dialing mode
If you cannot make calls, change this setting
according to your telephone line service. The...

Link to cell featureYou can connect your base unit and cellular
phone using Bluetooth wireless technology, so
that you can make or answer cellular calls
using your phone system. This allows you to:
– use the unit to talk on cellular calls even if some areas of your home have poor
cellular reception, simply by placing your
cellular phone in an area with good
reception.
– talk on cellular calls even if your cellular phone is in your pocket or bag.
– enjoy cordless cellular calls even if your cellular...

2Mb N:  “Yes ” a  M SELECT N
R When the cellular phone is unpaired,
the CELL indicator is turned off.
3 MOFF N
Link to cell settings
Selecting which unit receives
cellular calls
You can select which unit rings and receives
calls for a cellular line. When  “All ” is
selected, all handsets and the base unit ring.
1 For CELL 1:  MMENU N#6271
For CELL 2:  MMENU N#6272
2 Mb N: Select the desired handset or  “All ”.
a  M SAVE N a  M OFF N
Note:
R When you select a specific handset to
receive calls for a...

base unit, only 2 Bluetooth devices can be
used with the unit at the same time, and the
base unit loses its connection from other
Bluetooth devices. To automatically resume
the connection to Bluetooth devices, leave
the auto connection on.
R Some cellular phones lose connection after
usage, please check the specifications of
your cellular phone for more details.
1 MMENU N#632
2 Mb N: Select the desired setting.  a
M SAVE N a  M OFF N
Note:
R Some cellular phones may ask you if you
accept the connection...

Cellular line selectionThis feature determines which cellular line is
selected to make cellular calls when:
– you press  MCELL N on the handset.
– you press  M
/Z N on the handset while
the cellular line only mode is turned on.
The following settings are available:
– “Manual ” (default): You can select the
desired cellular line when making a call.
– “Cellphone 1 ”*1
: CELL 1 is selected.
– “Cellphone 2 ”*1
: CELL 2 is selected.
1 MMENU N#634
2 Mb N: Select the desired setting.  a
M SAVE N a  M OFF N
*1...

Making cellular callsImportant:
R The unit can be used to talk on 2 lines at
the same time (for example, 2 cellular lines,
or the landline and 1 cellular line).
R Only 2 Bluetooth devices can be used with
the unit at the same time (for example, 2
cellular lines, or the headset and 1 cellular
line).
R Before making calls, confirm that the
corresponding 
 on the handset is
displayed (page 13).
1 Lift the handset and then dial the phone
number.
RTo correct a digit, press  MCLEAR N.
2 MCELL N
R The unit...