Panasonic Kx Tgf350 Operating Instructions Manual

							
Operating Instructions
Digital Corded/Cordless Answering System
Model No.KX-TGF350
KX-TGF352
KX-TG572SK KX-TGF353 
 
 
  
 
   
Model shown is KX-TGF350.
Before initial use, see “Getting Started” on
page 8.
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save them for future
reference.
Consulte  “Guía Rápida Española”, página 57.
For assistance, visit our Web site:  www.panasonic.com/support for customers in the U.S.A.
or Puerto Rico.
Please register your product: www.panasonic.com/prodreg

TGF35x(en)_1205_ver041.pdf   12014/12/05   21:38:29    
						

							
Introduction
Model composition .............................................. 3
Accessory information  ........................................ 3
Important Information
For your safety  .................................................... 5
Important safety instructions  ...............................6
For best performance  ......................................... 6
Other information  ................................................ 6
Specifications ......................................................7
Getting Started
Setting up ............................................................8
Controls  ............................................................ 11
Display icons .....................................................12
Language settings  ............................................ 12
Date and time  ................................................... 13
Recording your greeting message  ....................13
Other settings  ................................................... 13
Making/Answering Calls
Making calls  ...................................................... 14
Answering calls  ................................................. 15
Useful features during a call  .............................15
Intercom
Intercom  ............................................................ 18
Call Block
Using the  MCALL BLOCK N button  .................... 19
Storing unwanted callers  ..................................19
Phonebook
Phonebook ........................................................22
Speed dial  ......................................................... 24
One-touch dial buttons ......................................25
Programming
Menu list  ........................................................... 27
Alarm  ................................................................ 32
Silent mode  ....................................................... 33
Baby monitor .....................................................33
Other programming ...........................................35
Registering a unit  .............................................. 36
Caller ID Service
Using Caller ID service  ..................................... 37
Caller list  ........................................................... 37
Answering System
Answering system .............................................39
Turning the answering system on/off  ................39
Greeting message  ............................................ 39
Listening to messages  ...................................... 40
Advanced new message alerting features  ........41
Remote operation  ............................................. 43Answering system settings ...............................44
Useful Information
Voicemail service  .............................................. 46
Wall mounting  ................................................... 47
Error messages  ................................................ 49
Troubleshooting  ................................................ 49
FCC and other information  ...............................54
Guía Rápida Española
Guía Rápida Española ......................................57
Appendix
Customer services  ............................................ 61
Warranty (For United States and Puerto
Rico)  ................................................................. 62
Index
Index .................................................................. 64
2
Table of Contents

TGF35x(en)_1205_ver041.pdf   22014/12/05   21:38:29 
						

							
Model composition
SeriesModel No.Base unitHandset
Part No.Part No.Quantity
KX-TGF350 seriesKX-TGF350KX-TGF350KX-TGFA301
KX-TGF352KX-TGF350KX-TGFA302
KX-TG572SKKX-TGF350KX-TGFA302
KX-TGF353KX-TGF350KX-TGFA303
Accessory information
Supplied accessories
No.Accessory item/Part number
Quantity
KX-TGF350KX-TGF352
KX-TG572SKKX-TGF353
AAC adaptor/PNLV226Z111
BTelephone line cord*1111
CDesk stand/Wall mounting adaptor *2,
 *3111
DCorded handset *4111
ECorded handset cord *5111
FRechargeable batteries *6246
GHandset cover*7,
 *8123
HBelt clip *9123
ICharger *10123
*1 PQJA10075Z (Transparent cord), PQJA10075Y (Black cord)
*2 The desk stand/wall mounting adaptor comes attached to the base unit.
*3 PNKL1051Z2 (White), PNKL1051Z1 (Black)
*4 PNLXP1012Y (Champagne gold), PNLXP1005Y (Metallic black)
*5 PQJA212M (White), PQJA212V (Black)
*6 See page 4 for replacement battery information.
*7 The handset cover comes attached to the handset.
*8 PNYNTGFA30NR (White), PNYNTGA680BR (Black)
*9 PNKE1268Z3 (White), PNKE1268Z1 (Black)
*10 PNLC1040ZN (Champagne gold), PNLC1040ZB (Black)
ABCDE
FGHI
For assistance, please visit www.panasonic.com/support3
Introduction

TGF35x(en)_1205_ver041.pdf   32014/12/05   21:38:29          
						

							
Additional/replacement accessories
Please contact your nearest Panasonic dealer for sales information (page 61).
Accessory itemModel number/Specifications
Rechargeable batteriesHHR-4DPA*1
R To order, please visit
www.panasonic.com/batterystore
Battery type:
– Nickel metal hydride (Ni-MH)
– 2 x AAA (R03) size for each handset
HeadsetKX-TCA60, KX-TCA93, KX-TCA400, KX-TCA430
T-adaptorKX-J66
Range extenderKX-TGA405 *2
Key detectorKX-TGA20*3
*1 Replacement batteries may have a different capacity from that of the supplied batteries.
*2 By installing this unit, you can extend the range of your phone system to include areas where
reception was previously not available. This product can be purchased online. Please visit our Web
site: www.panasonic.com/RangeExtender
*3 By registering the key detector (4 max.) to a Panasonic Digital Cordless Phone and attaching it to an easy-to-lose item in advance, you can locate and find the mislaid item to which the key detector is
attached. Please visit our Web site: www.panasonic.net/pcc/products/telephone/p/tga20/
Other information
RDesign and specifications are subject to change without notice.
R The illustrations in these instructions may vary slightly from the actual product.
Expanding your phone system
Handset (optional): KX-TGFA30
You can expand your phone system by registering optional
handsets (6 max.) to a single base unit.
ROptional handsets may be a different color from that of
the supplied handsets.
4For assistance, please visit www.panasonic.com/support
Introduction

TGF35x(en)_1205_ver041.pdf   42014/12/05   21:38:29  
						

							
For your safety
To prevent severe injury and loss of life/property, read this
section carefully before using the product to ensure
proper and safe operation of your product.
WARNING
Power connection
RUse only the power source marked on the product.
R Do not overload power outlets and extension cords.
This can result in the risk of fire or electric shock.
R Completely insert the AC adaptor/power plug into the
power outlet. Failure to do so may cause electric shock
and/or excessive heat resulting in a fire.
R Regularly remove any dust, etc. from the AC adaptor/
power plug by pulling it from the power outlet, then
wiping with a dry cloth. Accumulated dust may cause
an insulation defect from moisture, etc. resulting in a
fire.
R Unplug the product from power outlets if it emits
smoke, an abnormal smell, or makes an unusual noise.
These conditions can cause fire or electric shock.
Confirm that smoke has stopped emitting and contact
us at www.panasonic.com/contactinfo
R Unplug from power outlets and never touch the inside
of the product if its casing has been broken open.
R Never touch the plug with wet hands. Danger of
electric shock exists.
Installation
RTo prevent the risk of fire or electrical shock, do not
expose the product to rain or any type of moisture.
R Do not place or use this product near automatically
controlled devices such as automatic doors and fire
alarms. Radio waves emitted from this product may
cause such devices to malfunction resulting in an
accident.
R Do not allow the AC adaptor or telephone line cord to
be excessively pulled, bent or placed under heavy
objects.
Operating safeguards
RUnplug the product from power outlets before cleaning.
Do not use liquid or aerosol cleaners.
R Do not disassemble the product.
R Do not spill liquids (detergents, cleansers, etc.) onto
the telephone line cord plug, or allow it to become wet
at all. This may cause a fire. If the telephone line cord
plug becomes wet, immediately pull it from the
telephone wall jack, and do not use.
R Do not excessively pull the corded handset cord from
the base unit. This may cause the base unit to fall,
resulting in injury.
Medical
RConsult the manufacturer of any personal medical
devices, such as pacemakers or hearing aids, to
determine if they are adequately shielded from external
RF (radio frequency) energy. (The product operates in
the frequency range of 1.92 GHz to 1.93 GHz, and the
RF transmission power is 115 mW (max.).)
R Do not use the product in health care facilities if any
regulations posted in the area instruct you not to do so.
Hospitals or health care facilities may be using
equipment that could be sensitive to external RF
energy.
CAUTION
Installation and location
RNever install telephone wiring during an electrical
storm.
R Never install telephone line jacks in wet locations
unless the jack is specifically designed for wet
locations.
R Never touch uninsulated telephone wires or terminals
unless the telephone line has been disconnected at the
network interface.
R Use caution when installing or modifying telephone
lines.
R The AC adaptor is used as the main disconnect device.
Ensure that the AC outlet is installed near the product
and is easily accessible.
R This cordless handset is unable to make calls when:
– the handset batteries need recharging or have failed.
– there is a power failure.
Ni-MH rechargeable batteries
RWe recommend using the batteries noted on page 4.
USE ONLY rechargeable Ni-MH batteries AAA
(R03) size.
R Do not mix old and new batteries.
R Do not open or mutilate the batteries. Released
electrolyte from the batteries is corrosive and may
cause burns or injury to the eyes or skin. The
electrolyte is toxic and may be harmful if swallowed.
R Exercise care when handling the batteries. Do not
allow conductive materials such as rings, bracelets, or
keys to touch the batteries, otherwise a short circuit
may cause the batteries and/or the conductive material
to overheat and cause burns.
R Charge the batteries provided with or identified for use
with this product only, in accordance with the
instructions and limitations specified in this manual.
R Only use a compatible base unit (or charger) to charge
the batteries. Do not tamper with the base unit (or
charger). Failure to follow these instructions may cause
the batteries to swell or explode.
Attention:
A nickel metal hydride battery that is recyclable powers
the product you have purchased.
Please call 1-800-8-BATTERY (1-800-822-8837) for
information on how to recycle this battery.
For assistance, please visit www.panasonic.com/support5
Important Information

TGF35x(en)_1205_ver041.pdf   52014/12/05   21:38:29    
						

							
Note when using alkaline batteries for power backup
RThe batteries should be used correctly, otherwise the
unit may be damaged due to battery leakage.
R Do not charge, short-circuit, disassemble, or heat the
batteries.
R Do not dispose of batteries in a fire.
R Remove all the batteries when replacing.
R Do not mix old, new or different types of batteries.
R It is recommended that batteries are replaced annually.
R It is recommended that batteries are replaced after a
power outage.
Important safety instructions
When using your product, basic safety precautions should
always be followed to reduce the risk of fire, electric
shock, and injury to persons, including the following:
1. Do not use this product near water for example, near
a bathtub, washbowl, kitchen sink, or laundry tub, in a
wet basement or near a swimming pool.
2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk
of electric shock from lightning.
3. Do not use the telephone to report a gas leak in the vicinity of the leak.
4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They
may explode. Check with local codes for possible
special disposal instructions.
SAVE THESE INSTRUCTIONS
For best performance
Base unit location/avoiding noise
The base unit and other compatible Panasonic units use
radio waves to communicate with each other.
R For maximum coverage and noise-free
communications, place your base unit:
– at a convenient, high, and central location with no
obstructions between the cordless handset and
base unit in an indoor environment.
– away from electronic appliances such as TVs, radios, personal computers, wireless devices, or
other phones.
– facing away from radio frequency transmitters, such as external antennas of mobile phone cell stations.
(Avoid putting the base unit on a bay window or
near a window.)
R Coverage and voice quality depends on the local
environmental conditions.
R If the reception for a base unit location is not
satisfactory, move the base unit to another location for
better reception.
Environment
RKeep the product away from electrical noise generating
devices, such as fluorescent lamps and motors.
R The product should be kept free from excessive
smoke, dust, high temperature, and vibration.
R The product should not be exposed to direct sunlight.
RDo not place heavy objects on top of the product.
R When you leave the product unused for a long period
of time, unplug the product from the power outlet.
R The product should be kept away from heat sources
such as heaters, kitchen stoves, etc. It should not be
placed in rooms where the temperature is less than
0 °C (32 °F) or greater than 40 °C (104 °F). Damp
basements should also be avoided.
R The maximum calling distance may be shortened when
the product is used in the following places: Near
obstacles such as hills, tunnels, underground, near
metal objects such as wire fences, etc.
R Operating the product near electrical appliances may
cause interference. Move away from the electrical
appliances.
Routine care
RWipe the outer surface of the product with a soft
moist cloth.
R Do not use benzine, thinner, or any abrasive powder.
Other information
CAUTION:  Risk of explosion if battery is replaced by an
incorrect type. Dispose of used batteries according to the
instructions.
Notice for product disposal, transfer, or return
R This product can store your private/confidential
information. To protect your privacy/confidentiality, we
recommend that you erase information such as
phonebook or caller list entries from the memory
before you dispose of, transfer, or return the product.
Notice
6For assistance, please visit www.panasonic.com/support
Important Information

TGF35x(en)_1205_ver041.pdf   62014/12/05   21:38:29  
						

							
Specifications
RStandard:
DECT 6.0 (Digital Enhanced
Cordless Telecommunications 6.0)
R Frequency range:
1.92 GHz to 1.93 GHz
R RF transmission power:
115 mW (max.)
R Power source:
120 V AC, 60 Hz
R Power consumption:
Base unit:
Standby: Approx. 0.7 W
Maximum: Approx. 3.0 W
Charger:
Standby: Approx. 0.1 W
Maximum: Approx. 1.8 W
R Operating conditions:
0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 % relative air
humidity (dry)
For assistance, please visit www.panasonic.com/support7
Important Information

TGF35x(en)_1205_ver041.pdf   72014/12/05   21:38:29 
						

							
Setting up
Connections
n Base unit
Connect the AC adaptor to the unit by
pressing the plug firmly.
Connect the telephone line cord to the unit
until you hear a click.
Fasten the AC adaptor cord and the telephone
line cord by hooking it.
Connect the AC adaptor to the power outlet.Connect the telephone line cord to the
single-line telephone jack (RJ11C) until you
hear a click.
A DSL/ADSL filter (not supplied) is required if
you have a DSL/ADSL service.
Connect the corded handset cord to the
corded handset and the base unit until you
hear a click.
Note:
R Use only the supplied Panasonic AC adaptor
PNLV226.
RFollow the directions on the display to set up
the unit.
nChargerConnect the AC adaptor to the power outlet.
Handset battery installation
R USE ONLY rechargeable Ni-MH batteries AAA
(R03) size (
).
R Do NOT use alkaline/manganese/Ni-Cd
batteries.
R Confirm correct polarities (
, ).
RFollow the directions on the display to set up
the unit.
8For assistance, please visit www.panasonic.com/support
 Getting Started

TGF35x(en)_1205_ver041.pdf   82014/12/05   21:38:30       7
7
1
46
5
12
33
3  1 1   1  
						

							
Handset battery charging
Charge for about 7 hours.
RConfirm  “Charging ” is displayed (
).
R When the batteries are fully charged,  “Fully
charged ” is displayed.
Handset battery level
IconBattery level
High
Medium
Low
Needs charging.
Empty
Panasonic Ni-MH battery performance
(supplied batteries)
OperationOperating time
In continuous use13 hours max. *1
Not in use (standby)12 days max.*1
*1 If eco mode is on.
Note:
R
Actual battery performance depends on usage
and ambient environment.
Base unit battery installation (for
power backup)
You can insert 2 AAA (R03) batteries (not
supplied) into the base unit that will power the unit
temporarily in the event of a power failure.
Important:
R The following batteries can be used with the
base unit:
– Rechargeable Ni-MH batteries *1
,  *2
 (including
the batteries used in your handset(s))
– Standard (non-rechargeable) alkaline
batteries *3
R Do NOT use manganese batteries.
R Confirm correct polarities (
, ).
*1 The base unit can fully charge Ni-MH batteries in about 15 hours.
*2 We recommend using HHR-4DPA batteries (page 4).
*3 Only insert alkaline batteries once a power failure occurs. Remove the alkaline batteries
when power is restored.
1 Disconnect the telephone line cord ( A).
2 Open the battery cover ( B).
3 Install the batteries in the battery compartment
(C ).
4 Close the cover, then reconnect the telephone
line cord ( D).
Note:
R If your phone service provider requires
additional devices in order to make and receive
calls, such as a modem, you may still not be
able to make and receive calls even if the base
unit’s backup power feature is functioning.
Base unit battery status when a power failure
occurs
IconBattery status
Power backup mode is on.
Battery power is low. *1
For assistance, please visit www.panasonic.com/support9
Getting Started 

TGF35x(en)_1205_ver041.pdf   92014/12/05   21:38:301 1          B
C
D
A      
						

							
*1If  begins flashing on the base unit, replace
the batteries with new ones as soon as
possible. If you replace Ni-MH batteries with
alkaline batteries, insert the Ni-MH batteries
into the base unit again after the power is
restored so that they will be recharged.
Battery saving mode setting
This feature allows the base unit to reduce its
power consumption by limiting the available
functions and therefore extend battery life during a
power failure.
The following settings are available:
– “On ”: The unit will work as a standard
telephone. Only the corded handset can be
used to make and receive calls. (You cannot
use the base unit display, phonebook,
one-touch dial, answering system,
speakerphone, etc.)
The base unit display is blank.
– “Off ” (default): You can use the full functions
of the base unit, but battery life is not extended.
The brightness level for the base unit display is
lowered.
Base unit
1 MMENU N#150
2 Mb N: Select the desired setting.
3 MSAVE N a  M EXIT N
Note:
R Once the battery saving mode is set to  “On ”,
the unit rings with the volume level 1 even if the
ringer volume for the base unit is set to  “Off ” to
let you know an incoming call is being received.
Panasonic Ni-MH battery performance
(optional batteries) when operating on backup
battery power
OperationSaving mode
OffOn
In continuous use2 hours
max.7 hours
max.
Not in use (standby)3 hours
max.8 hours
max.
Note:
R Battery performance depends on the type of
batteries.
R Actual battery performance depends on usage
and ambient environment.
Note when setting up
Note for connections
RThe AC adaptor must remain connected at all
times. (It is normal for the adaptor to feel warm
during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of the
adaptor may cause it to become disconnected.
Note for Ni-MH battery installation
R Handset:  Use the supplied rechargeable
batteries.
R Handset/Base unit:  For replacement, we
recommend using the Panasonic rechargeable
batteries noted on page 4, 5.
Note for battery charging
R It is normal for the handset to feel warm during
charging.
R Clean the charge contacts of the handset, base
unit, and charger with a soft and dry cloth once
a month. Before cleaning the unit, disconnect
from power outlets and any telephone line
cords. Clean more often if the unit is exposed to
grease, dust, or high humidity.
Intelligent eco mode
This feature automatically reduces handset power
consumption by suppressing handset transmission
power when the handset is close to the base unit.
R When this feature is activated, 
 is displayed.
R Eco mode is turned off when the clarity booster
is activated (page 16).
10For assistance, please visit www.panasonic.com/support
 Getting Started

TGF35x(en)_1205_ver041.pdf   102014/12/05   21:38:30