Panasonic Kx Tgf350 Operating Instructions Manual

Erasing all call block numbers
Handset / Base unit
1 MCALL BLOCK N
2 Mb N:  “Block a single number ” or  “Block
range of numbers ” a  M SELECT N
3 Proceed with the operation for your unit.
Handset:  M MENU N a  M b N:  “Erase all ” a
M SELECT N
Base unit:  M ERASE N
4 Mb N:  “Yes ” a  M SELECT N
5 Mb N:  “Yes ” a  M SELECT N
6 Proceed with the operation for your unit.
Handset:  M OFF N
Base unit:  M EXIT N
For assistance, please visit www.panasonic.com/support21
Call Block

TGF35x(en)_1205_ver041.pdf...

PhonebookYou can add 100 names (16 characters max.) and
phone numbers (24 digits max.) to the phonebook,
and assign each phonebook entry to the desired
group (page 23).
Important:
R All entries can be shared by the base unit and
any registered handset.
Adding phonebook entries
Handset / Base unit
1 Proceed with the operation for your unit.
Handset:  M F N 
 a  M MENU N
Base unit:  MN  a  M MENU N
2 Mb N:  “Add new entry ” a  M SELECT N
3 Enter the party’s name.  a M OK N
4 Enter the party’s phone...

2Mb N: Select the desired entry.  a M MENU N
R To edit the number:  Mb N:  “Edit ” a
M SELECT N
Press  MEDIT N repeatedly until the phone
number is shown in the desired format. And
then, press  MSAVE N. Go to step 4.
3 Mb N:  “Save caller ID ” a  M SELECT N
4 Mb N:  “Phonebook ” a  M SELECT N
5 Continue from step 3, “Editing entries”,
page 23.
Base unit
1 MCID N
2 Mb N: Select the desired entry.
R To edit the number, press  MEDIT N
repeatedly until the phone number is shown
in the desired format.
3...

Erasing entries
Erasing an entry
Handset
1 Find the desired entry (page 23).
2 MMENU N a  M b N:  “Erase ” a  M SELECT N
3 Mb N:  “Yes ” a  M SELECT N a  M OFF N
Base unit
1 Find the desired entry (page 23).
2 MERASE N a  M b N:  “Yes ” a  M SELECT N a
M EXIT N
Erasing all entries
Handset / Base unit
1 Proceed with the operation for your unit.
Handset:  M F N 
 a  M MENU N
Base unit:  MN  a  M MENU N
2 Mb N:  “Erase all ” a  M SELECT N
3 Mb N:  “Yes ” a  M SELECT N
4 Mb N:  “Yes ” a  M SELECT N
5...

4Enter the party’s phone number (24 digits
max.).  a M OK N
5 MSELECT N a  M EXIT N
n From the phonebook:
1 MSPEED DIAL N
2 Mb N: Select the desired speed dial key.  a
M
N
3 Mb N: Select the desired entry.
4 MSAVE N a  M EXIT N
Note for handset and base unit:
R If you edit a phonebook entry which is assigned
to a speed dial key, the edited entry does not
transfer to the speed dial key.
Note for base unit:
R You can also select the desired entry as follows:
– Press and hold the desired speed dial key (...

Adding phone numbers for outside
calls
Base unit
n By entering phone numbers:
1 Press and hold the desired one-touch dial
button (1 to 3).  a M EDIT N
2 Enter the party’s name (16 characters
max.).  a M OK N
3 Enter the party’s phone number (24 digits
max.).  a M OK N
4 MSELECT N a  M EXIT N
n From the phonebook:
1 Press and hold the desired one-touch dial
button (1 to 3).
2 M
N
3 Mb N: Select the desired entry.
4 MSAVE N a  M EXIT N
Note:
R If you edit a phonebook entry which is assigned
to a one-touch...

Menu list
To access the features, there are 2 methods.
Handset / Base unit
n Scrolling through the display menus
1 MMENU N
2 Press  MC N or  MD N to select the desired main menu.  a M SELECT N
3 Press  MC N or  MD N to select the desired item from the next sub-menus.  a M SELECT N
4 Press  MC N or  MD N to select the desired setting.  a M SAVE N
n Using the direct command code
1 MMENU N a  Enter the desired code.
Example:  Press MMENU N#101 .
2 Select the desired setting.  a M SAVE N
Note:
R The unit...

Sub-menu 1Sub-menu 2SettingsCodeUnit
GreetingRecord greeting*1–#302/39
Check greeting–#303/40
Pre-recorded*1
(Reset to pre-recorded greeting)–#304/39
New message
alert *1Outgoing call
–
On/OffOn
#338/41
Outgoing call
–Notification to–
Outgoing call
–Remote codeActivate

Base unit beepOn
#339/41
SettingsRing count *12-7 rings
<
4 rings >
Toll saver#211/44
Recording time *11 min
<
3 min >
Greeting only *2#305/45
Remote code*1<
111 >#306/43
Screen call
Off#310/44
Answer on *1––#32739
Answer off *1––#32839...

Main menu:  “Speed dial ”
OperationCodeUnit
Viewing the speed dial entry.#261/24
Main menu:  “Settings ”
Sub-menu 1Sub-menu 2SettingsCodeUnit
Ring adjustmentsRinger volumeOff-6 #160/–
Ringer tone *4, *5<
Tone 1 >#161–
Silent mode
–On/OffOn
#238/33
Silent mode
–Start/End#237/33
Silent mode
–Select groupGroup 1-9#241/33
Set date & timeDate and time *1–#101/13
Memo alarm
–
Alarm1-3Once
Daily
Weekly
#72032
Time
adjustment *1, *3<
Caller ID auto >
Manual#226/–
Talking caller ID–Handset:
< On >
Off
Base unit:...

Sub-menu 1Sub-menu 2SettingsCodeUnit
Call block*1Block a single
number–#217/19
Block range of
numbers–/20
Block unknown CID
(CID: Caller ID)Block
< Unblock >#240/20
One ring for
blocked call
No#173/20
One-touch dial––#24725
Speed dial––#261/24
Record greeting *1––#302/39
VoicemailSave VM
access#*1,
 *9
( VM : Voicemail)
Save Voicemail
access# *1,
 *10–#331/46
VM tone detect *1<
On >
Off#332/46
LCD contrast
(Display contrast)–Handset:
Level 1-4 
Base unit:
Level 1-6 #145/–
Handset name––#10435
Display...