Panasonic Kx Tge432 Operating Instructions Manual

Sub-menu 1 Sub-menu 2 Settings Code
Key detector
s
etting *7
– 1: Add new
device  (for
Detector1 )*8
– 2: Add new
device  (for
Detector2 )
– 3: Add new
device  (for
Detector3 )
– 4: Add new
device  (for
Detector4 )Change name
* 1
Detector1 #6561–
Detector2 *
 9
#6562* 9
Detector3 *
 9
#6563* 9
Detector4 *
 9
#6564* 9
Registration –#6571 –
#6572 *
 9
#6573 *
 9
#6574 *
 9
Deregistration –#6581 –
#6582 *
 9
#6583 *
 9
#6584 *
 9
Call block *
 1
Block a single
n
umber –
#21723
Block range of
n
 umbers –
24...

Sub-menu 1 Sub-menu 2 Settings Code
Auto intercom Handset
On 
< O
ff > #273
21
Base unit *
 1,
 *3
On 
< O
ff > #
G 273
Key tone –
Off #165
–
Caller ID edit
(
 Caller ID number auto
edit) –
 
Off #214
40
Auto talk *
 10
–On 
< O
ff > #200
17
Set tel line Set dial mode*
 1

Pulse #120
15
Set flash time *
 1, *11
80 ms
9
0 ms
100 ms
110 ms
160 ms
200 ms
250 ms
300 ms
400 ms
600 ms
< 700 ms >
900 ms #121
18
Set line mode *
 1, *12
A < B> #122–
Call sharing *
 1
– 
Off #194
19
Registration Register handset...

Main menu:   “
Baby monitor ”Sub-menu 1 Sub-menu 2 Settings Code
On/Off
–On
<
O

ff > #268
35
Sensitivity level –Low
<

Middle>
High #269
36Main menu:   “
K
ey detector ”*7 Sub-menu 1 Sub-menu 2 Settings Code
Search
––#655 –
Battery check ––*1 If you program these settings using one of the units, you do not need to program the same
i
 tem using another unit.
*2 This menu is not displayed when scrolling through the display menus. It is only available in direct command code.
*3 KX-TGE440 series: page 3
*4...

Alarm
A n alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R Make sure the unit’s date and time setting
is correct (page 14).
1 MMENU N#720
2 Mb N: Select the desired alarm.  a
M SELECT N
3 Mb N: Select the desired alarm option....

2
Mb N: Select the desired setting.  a
M SAVE N
R If you select  “Off ”, press  MOFF N to
exit.
3 Enter the desired hour and minute you
wish to start this feature.
4 *: Select  “AM ” or  “PM ”.  a  M OK N
5 Enter the desired hour and minute you
wish to end this feature.
6 *: Select  “AM ” or  “PM ”.
7 MSAVE N a  M OFF N
*1 KX-TGE440 series: page 3 Changing the start and end time
1
F

or handset setting:  MMENU N#237
For base unit setting (using a
handset) *1
: MMENU N#*237
2 Continue from step 3,...

Note:
R
W
hen this feature is on, another handset or
the base unit can hear the monitored
handset by making an intercom call. To monitor from outside
I

f you enable this feature, the unit will call a
pre-programmed phone number when the
handset detects sound. After you answer the
call, you can listen in on the room where the
handset is located.
n From the phonebook:
1 MMENU N#268
2 Mb N:  “On ” a  M SELECT N
3 Mb N: Select  “Outgoing call ” to
monitor from outside.  a M ADD N
4 Mb N:  “Phonebook ” a  M...

Answering the baby monitor
n
W
hen monitoring with a unit:
Handset:  Press M N
 
to answer a call.
Base unit:  Press M N
 to answer a call *1
.
*1 KX-TGE440 series: page 3
If you want to respond from the monitoring
unit, press  MMUTE N.
R The monitoring unit will answer calls
automatically when the auto intercom
feature is set to  “On ” (page 21).
Note:
R If you receive an outside call when
communicating with the monitored handset,
the interrupt tone sounds.
– To answer the call with the handset,
press...

Deregistering a handset
A  handset can cancel its own registration to
the base unit, or other handsets registered to
the same base unit. This allows the handset to
end its wireless connection with the system.
1 MMENU N#131
R All handsets registered to the base unit
are displayed.
2 Mb N: Select the handset you want to
cancel.  a M SELECT N
3 Mb N:  “Yes ” a  M SELECT N a  M OFF N
38 For assistance, please visit http://shop.panasonic.com/supportProgramming
TGE43xUS(en)_1112_ver021.pdf   382015/11/12...

Using Caller ID service
I mportant:
R This unit is Caller ID compatible. To use
Caller ID features, you must subscribe to a
Caller ID service. Contact your phone
service provider for details. Caller ID features
W

hen an outside call is being received, the
caller information is displayed.
Caller information for the last 50 callers is
logged in the caller list from the most recent
call to the oldest.
R If the unit cannot receive caller information,
the following is displayed:
–“Out of area ”: The caller...

Editing a caller’s phone number
Y ou can edit a phone number in the caller list
by removing its area code and/or the long
distance code “1”.
1 MC N CID
2 Mb N: Select the desired entry.  a M MENU N
3 Mb N:  “Edit ” a  M SELECT N
4 Press  MEDIT N repeatedly until the phone
number is shown in the desired format.
5 M N
Caller ID number auto edit feature
O
 nce you call back an edited number, the unit
which was used to call back remembers the
area code and format of the edited number.
The next time someone...