Panasonic Kx Tge432 Operating Instructions Manual

2
Mb N: Select the desired unit or  “Voice
paging ”.  a  M SELECT N
R If you select  “Voice paging ”, speak
into the microphone after the beep.
Your voice will be heard using the
speakers of the base unit *1
 and all
handsets, until a paged party answers
your page or until you press  MOFF N.
After the other party answers, the
speakerphone mode is turned on.
3 When you finish talking, press  MOFF N.
*1 KX-TGE440 series: page 3
Note:
R You can also use the  MINTERCOM N soft
key, if displayed, to make...

Panasonic Ni-MH battery
p
erformance (supplied batteries)
during power backup mode
When the batteries are fully charged,
operating time of the handset in power backup
mode varies depending on usage.
– Continuous use of the handset in power backup mode: 1.5 hours max.
– Continuous use of the handset other than a handset in power backup mode: 2 hours
max.
– Not in use in power backup mode: 2 hours max. Making calls during a power
f

ailure
n When only 1 handset is registered:
1 Lift the handset and dial...

Call block
Y ou can press the  MCALL BLOCK N button in
the following situations to disconnect the
current call and add a phone number to the
call block list:
– when an incoming call is being received
– when an incoming call is being recorded by the answering system
– when talking on an outside call
Once a phone number has been added to the
call block list, the unit will block calls from that
phone number in the future.
1 Press  MCALL BLOCK N under the
situations shown above.
2 Confirm the call block...

Storing a range of number
1
MC
ALL BLOCK N
2 Mb N:  “Block range of numbers ” a
M SELECT N
3 MMENU N a  M b N:  “Add ” a  M SELECT N
4 Enter the desired number (2-8 digits).  a
M SAVE N a  M OFF N Blocking incoming calls that
h

ave no phone number
You can block calls when no phone number is
provided, such as private callers or out of area
calls.
1 MCALL BLOCK N
2 Mb N:  “Block unknown CID ” a
M SELECT N
3 Mb N: Select the desired setting.  a
M SAVE N a  M OFF N Turning the first ring on and off
Y
 ou...

Phonebook
Y ou can add 100 names (16 characters max.)
and phone numbers (24 digits max.) to the
phonebook, and assign each phonebook entry
to the desired group (page 25).
Important:
R All entries can be shared by any registered
handset. Adding phonebook entries
1
MF N W  a  M M

ENUN
2 Mb N:  “Add new entry ” a  M SELECT N
3 Enter the party’s name.  a M OK N
4 Enter the party’s phone number.  a M OK N
5 Mb N: Select the desired group.  a
M SELECT N 2 times  a M OFF N
Note:
R In step 3, you can switch the...

Changing group names/setting ringer
I D
The default group name is  “Group 1 ” to
“ Group 9 ”.
1 MF N W  a  M MENU N
2 Mb N:  “Group ” a  M SELECT N
3 Mb N: Select the desired group.  a
M SELECT N
4 To change group names
Mb N:  “Group name ” a  M SELECT N a
Edit the name (10 characters max.).  a
M SAVE N
To set group ringer tone
M b N: Select the current setting of the
group ringer tone.  a M SELECT N a  M b N:
Select the desired ringer tone.  a M SAVE N
5 MOFF N Finding and calling from a
p

honebook...

Speed dial
Y ou can assign 1 phone number to each of
the dial keys ( 1 to  9) on the handset. Adding phone numbers to speed
d

ial keys
n By entering phone numbers:
1 Press and hold the desired speed dial
key ( 1 to  9). a  M ADD N
2 Mb N:  “Manual ” a  M SELECT N
3 Enter the party’s name (16 characters
max.).  a M OK N
4 Enter the party’s phone number (24
digits max.).  a M OK N a  M SELECT N
a  M OFF N
n From the phonebook:
1 Press and hold the desired speed dial
key ( 1 to  9). a  M ADD N
2 Mb N:...

Menu list
T
o access the features, there are 2 methods.
n Scrolling through the display menus
1 MMENU N
2 Press  MC N or  MD N to select the desired main menu.  a M SELECT N
3 Press  MC N or  MD N to select the desired item from the next sub-menus.  a M SELECT N
4 Press  MC N or  MD N to select the desired setting.  a M SAVE N
n Using the direct command code
1 MMENU N a  Enter the desired code.
Example:  Press MMENU N#101 .
2 Select the desired setting.  a M SAVE N
Note:
R To exit the operation, press...

Sub-menu 1 Sub-menu 2 Settings Code
New message
a
lert *1 Outgoing call
–
O
n/Off On
<
O
ff > #338
43
Outgoing call
– N

otification to –
Outgoing call
– R

emote code Activate
<
I
nactivate >
Base unit beep On  #339
43
Settings Ring count*
 1
Toll saver
2
-7 rings
 #211
46
Recording time *
 1

1 min
Greeting only *2#305
46
Remote code *
 1
 #30645
Screen call
– H

andset <
On >
Off #310
46
Screen call
– B

ase unit *1,
 *3 <
On >
Off #
G 310 46
Answer on *
 1
––#32741
Answer off *
 1
– –#32841Main menu:...

Main menu:   “
Speed dial ”Operation Code
Viewing the speed dial entry.
#26127Main menu:   “
S
ettings ”Sub-menu 1 Sub-menu 2 Settings Code
Ring adjustments
Ringer volume
(
 Handset) Off
–6  #160–
Ringer tone *
 5, *6
(Handset) <
Tone 1 > #161 –
Silent mode
– H

andset On/Off
–
O
n
– < Off> #238
34
Start/End
–
 #237
35
Select group
G
 roup 1-9 #241
35
Silent mode
– B

ase unit *1,
 *3 On/Off
–
O
n
– < Off> #
G 238 34
Start/End
–
 #
G 237 35
Select group
G
 roup 1-9 #
G 241 35
Set date & time Date and...