Panasonic Kx Tge432 Operating Instructions Manual

Battery charging
C
harge for about 7 hours.
R Confirm  “Charging ” is displayed ( ).
R W

hen the batteries are fully charged,
“ Fully charged ” is displayed. Note when setting up
Note for connections
R
T

he AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to...

Controls
Handset Ringer indicator
M
essage indicator Belt clip holes
Speaker
MjN
/M
kN  (VOL.: Volume up/down) M N
 (TALK) Dial keypad (
*:  TONE) Headset jack
M
Z N (
SP-PHONE: Speakerphone) M
FLASH NMCALL WAIT N Microphone
Receiver
Display
M
O
FF N ( )
M
CALL BLOCK N ( )
Charge contacts
n C
ontrol type  
S
oft keys
By pressing a soft key, you can select the
feature shown directly above it on the
display.  
N
avigator key
– MD N,  MC N,  MF N, or  ME N: Scroll through
various lists and items.
–...

Base unit
n
K
X-TGE430 series: page 3 Charge contacts
Speaker
M
L
OCATES CELL NM
HANDSET LOCATOR NMjN
/MkN  (VOL.: Volume up/down) Message counter
M
A
NSWER ON/OFF NM N
 (PLAY/STOP)
Message indicator M N
 
(Repeat) M N
 (Skip) M
ERASE N n
K
X-TGE440 series: page 3 Charge contacts
Speaker
M
H
OLD N M CONF N M
REDIAL N M PAUSE N M
FLASH N M CALL WAIT N M
Z N (SP-PHONE: Speakerphone)
SP-PHONE indicator Message counter
M N
 
(PLAY/STOP)
Message indicator M
A
NSWER ON/OFF N M
LOCATES CELL N M
LOCATOR N M...

Item Meaning
Out of base unit range
The line is in use.
R
W
hen flashing:
The call is put on hold.
R When flashing rapidly: An
incoming call is now being
received. Eco mode is on. (page 11)
Noise reduction is set.
(
 page 18) Equalizer is set. (page 18)
Z Speakerphone is on.
(
 page 16) Ringer volume is off.
(
 page 17, 30) Silent mode is on. (page 34)
Call sharing mode is off.
(
 page 32) Alarm is on. (page 34)
Handset number
Battery level
Blocked call (page 23)
Clarity booster is on.
(
 page 18) Baby...

Recording your greeting
m
essage
You can record your own greeting message
instead of using a pre-recorded greeting
message. See page 41 for details.
1 MMENU N#302
2 Mb N:  “Yes ” a  M SELECT N
3 Record a greeting message.  a M STOP N
a  M OFF N Other settings
Dialing mode
I
 f you cannot make calls, change this setting
according to your telephone line service. The
default setting is  “Tone ”.
“ Tone ”: For tone dial service.
“ Pulse ”: For rotary/pulse dial service.
1 MMENU N#120
2 Mb N: Select the...

Making calls
Using the handset
1
L
ift the handset and then dial the phone
number.
R To correct a digit, press  MCLEAR N.
2 Press  M N
 
to make the call.
R To make the call using the
speakerphone, press  MZ N.
3 When you finish talking, press  MOFF N or
place the handset on the base unit or
charger.
Note:
R To switch to the speaker, press  MZ N.
To switch back to the receiver, press  MZ N/
M N
.
R I

n step 1, you can store the dialed phone
number to the phonebook by pressing
M SAVE N. Making a call...

Answering calls
Using the handset
W
hen a call is being received, the ringer
indicator flashes rapidly.
1 Lift the handset and then press  M N
 
or
M N
 when the unit rings.
2 When you finish talking, press  MOFF N or
place the handset on the base unit or
charger.
Any key answer:  You can answer the call by
pressing any dial key.
Auto talk:  You can answer calls simply by
lifting the handset (page 32).
Temporary handset ringer off:  You can turn
the ringer off temporarily by pressing  M N
. Using the...

Flash
Handset / Base unit
* 1
*1 KX-TGE440 series: page 3
M FLASH N allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
Note:
R To change the flash time, see page 32. For call waiting or Call Waiting
C
 aller ID service users
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your phone
service provider.
This feature allows you to receive calls while
you are already talking on the phone. If...

Call share
Y ou can join an existing outside call. Handset
T

o join the conversation, press  M N
 
when
the other unit is on an outside call. Base unit
*
 1
*1 KX-TGE440 series: page 3
To join the conversation, press  MZ N when the
handset is on an outside call.
Note for handset and base unit:
R A maximum of 3 parties (including 1 outside
party) can join a conversation using 2
extensions.  (3-way conference)
R To prevent other users from joining your
conversations with outside callers, turn call
sharing...

Handset locator
Y ou can locate a misplaced handset by
paging it.
1 Base unit:  Press MLOCATOR N or
M HANDSET LOCATOR N.
R All registered handsets beep for 1
minute.
2 To stop paging:
Base unit:
Press  MLOCATOR N or  MHANDSET
LOCATOR N.
Handset:
n KX-TGE430 series: page 3
Press  MOFF N.
n KX-TGE440 series: page 3
Press  M N
,
 then press  MOFF N. Cell locator
T
 his feature allows you to locate a misplaced
cellular phone by pressing the  MLOCATES
CELL N button on the base unit and calling
your cellular...