Panasonic Kx Tgd6841 Operating Instructions Manual

Wall mounting
T he base unit can be mounted on a wall by
changing the wall mounting adaptor’s position.
Note:
R Make sure that the wall and the fixing
method are strong enough to support the
weight of the unit. Base unit
1
T

o remove the wall mounting adaptor,
push down the release levers ( A).
Remove the adaptor ( B). 2
A 
Turn the adaptor so that the words
“UP WALL” are facing up.
B Tuck the telephone line cord inside the
wall mounting adaptor.
C  Connect the AC adaptor cord and
telephone line cord....

Error messages
Display message Cause/solution
Base no power
o r
No link. Re-connect base
AC adaptor.
or
No link. R
The handset has lost communication with the base
unit. Move closer to the base unit and try again.
R Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
R The handset’s registration may have been canceled.
Re-register the handset (page 35).
R When  “No link. ” is displayed during a power
failure, place a handset on the base unit to supply
power to the...

Troubleshooting
I f you still have difficulties after following the instructions in this section, disconnect the base unit’s
AC adaptor, then reconnect the base unit’s AC adaptor. Remove the batteries from the handset,
and then insert the batteries into the handset again. General use
Problem Cause/solution
The handset does not turn on
e
 ven after installing charged
batteries. R
Place the handset on the base unit or charger to turn on
the handset.
The unit does not work. RM
ake sure the batteries are...

Problem Cause/solution
I fully charged the batteries, but
–  still flashes,
–  is displayed, or
–
the operating time seems to be shorter. R
C
lean the battery ends ( ,  ) and the charge contacts
w
ith a dry cloth and charge again.
R It is time to replace the batteries (page 10). Making/answering calls, intercom
Problem Cause/solution
 is displayed.
R
T
he handset is too far from the base unit. Move closer.
RThe base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
R The...

Caller ID/Talking Caller ID
Problem Cause/solution
Caller information is not
d isplayed. R
You must subscribe to Caller ID service. Contact your
service provider/telephone company for details.
R If your unit is connected to any additional telephone
equipment such as a Caller ID box or cordless telephone
line jack, plug the unit directly into the wall jack.
R If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base unit and
the telephone line jack. Contact your DSL/ADSL...

Problem Cause/solution
The 2nd caller’s information is
n ot displayed during an outside
call. R
In order to use Caller ID, call waiting, or Call Waiting
Caller ID (CWID), you must first contact your service
provider/telephone company and subscribe to the desired
service.
After subscribing, you may need to contact your service
provider/telephone company again to activate this specific
service, even if you already subscribed to both Caller ID
and Call Waiting with Caller ID services (CWID). Answering...

FCC and other information
For assistance, please visit http://www.panasonic.com/help
57Useful InformationTG684x7x(en)_1127_ver021.pdf   572012/11/27   18:16:49This equipment complies with Part 68 of the 
FCC rules and the requirements adopted by 
the ACTA. On the bottom of this equipment 
is a label that contains, among other 
information, a product identifier in the 
format US:ACJ----------.
If requested, this number must be provided 
to the telephone company.
L Registration No.............(found on the...

58
For assistance, please visit http://www.panasonic.com/helpUseful InformationTG684x7x(en)_1127_ver021.pdf   582012/11/27   18:16:49manufacturer about the availability of 
Hearing Aids which provide adequate 
shielding to RF energy commonly emitted 
by digital devices.
WHEN PROGRAMMING EMERGENCY 
NUMBERS AND(OR)  MAKING TEST 
CALLS TO EMERGENCY NUMBERS:
1) Remain on the line and briefly explain to 
the dispatcher the reason for the call.
2) Perform such activities in the off-peak 
hours, such as early...

For assistance, please visit http://www.panasonic.com/help
59Useful InformationTG684x7x(en)_1127_ver021.pdf   592012/11/27   18:16:49Compliance with TIA-1083 standard: 
Telephone handsets identified with this logo 
have reduced noise and interference when 
used with T-Coil equipped hearing aids and 
cochlear implants.
T
Compatible with
Hearing Aid T-Coil
TIA-1083  

Guía Rápida Española
60
Para obtener ayuda, visite http://www.panasonic.com/help (solo en inglés) Guía Rápida EspañolaTG684x7x(en)_1127_ver021.pdf   602012/11/27   18:16:49Instalación
Unidad base
LUse solo el adaptador de corriente Panasonic PNLV226 incluido.
CARGUE
APROXIMADAMENTE
DURANTE 7 HORASAuricular
Cargador
LUTILICE SOLO baterías de Ni-MH tamaño AAA (R03). LNO utilice baterías Alcalinas, de Manganeso o de Ni-Cd.LCompruebe que las polaridades son las correctas (S,T).
A la toma
de corriente
A la...