Panasonic Kx Tgd6841 Operating Instructions Manual

Note when setting up
Note for connections
R
T
he AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become
disconnected. Note for battery installation
R U

se the supplied rechargeable batteries.
For replacement, we recommend using the
Panasonic rechargeable...

Controls
Handset
Speaker
M N
 (TALK) Headset jack
Dial keypad (
*:
  TONE)M
Z N (
SP-PHONE: Speakerphone) Microphone
Receiver
Display
M
O
FF N M
F
LASH NMCALL WAIT N M
N
OISE REDUCTION N Charge contacts
n C

ontrol type  
S
oft keys
The handset features 2 soft keys. By
pressing a soft key, you can select the
feature shown directly above it on the
display.  
N
avigator key
– MD N,  MC N,  MF N, or  ME N: Scroll through
various lists and items.
–  (Volume: 
MD N 
 or MC N): Adjust the
receiver or speaker...

Speaker
Display
M
HOLD N M
R
EDIAL N M PAUSE N M
F
LASH N M CALL WAIT NM
Z N (
SP-PHONE: Speakerphone)
SP-PHONE indicator M
E
RASE N M
A
NSWER ON/OFF N
ANSWER ON/OFF indicator M
L
OCATOR N M INTERCOM N M
n N 
(STOP) (EXIT) M N
 
(PLAY)
Message indicator Desk stand/Wall mounting adaptor
R
T

he adaptor is a removable
attachment for desk stand or wall
mounting use (page 51). Microphone
Dial keypad (
*:
  TONE)
n Control type  Soft keys
T

he base unit features 3 soft keys. By
pressing a soft key, you can...

Item Meaning
Clarity booster is on.
(
page 18)
In use Answering system is being
u

sed by another handset or the
base unit.
Line in
u
 se Someone is using the line.Base unit display items
Item Meaning
Ringer volume is off.
(

page 17) Silent mode is on. (page 32)
Call sharing mode is off.
(

page 29)
In use Answering system is being
u

sed by a handset.
Line in
u
 se Someone is using the line. “
G
reeting only ” is selected
as the caller’s recording time.
In this case, the answering
system answers calls...

Voice guidance language
Y ou can select either  “English ” or
“ Español ” as the voice guidance language
of the answering system. The default setting is
“ English ”. Handset
1 MM

ENUN#112
2 Mb N: Select the desired setting.
3 MSAVE N a  M OFF N Dialing mode
I
 f you cannot make calls, change this setting
according to your telephone line service. The
default setting is  “Tone ”.
“ Tone ”: For tone dial service.
“ Pulse ”: For rotary/pulse dial service. Handset
1 MM

ENUN#120
2 Mb N: Select the desired...

Making calls
Using the handset
1
L
ift the handset and dial the phone
number.
R To correct a digit, press  MCLEAR N.
2 Press  M N
 
or  MCALL N.
3 When you finish talking, press  MOFF N or
place the handset on the base unit or
charger. Using the speakerphone
1 D

ial the phone number and press  MZ N.
R Speak alternately with the other party.
2 When you finish talking, press  MOFF N.
Note:
R For best performance, use the
speakerphone in a quiet environment.
R To switch back to the receiver, press  MZ N/
M...

Pause (for PBX/long distance
s ervice users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 24).
Example:  If you need to dial the line access
number “9” when making outside calls with a
PBX: Handset
1 9 a  M D N 

(Pause)
2 Dial the phone number.  a M N
Base unit
1 9 a  M P

AUSEN
2 Dial the phone number.  a M Z N
Note for handset and base unit:
R A 3.5 second pause...

3
To release hold, press  M N
.
R A
nother handset user can take the call
by pressing  M N
.
R T

he base unit user can take the call by
pressing  MZ N. Base unit
1 P

ress  MHOLD N during an outside call.
2 To release hold, press  MZ N.
R A handset user can take the call by
pressing  M N
.
N

ote for handset and base unit:
R If a call is kept on hold for more than 9
minutes, an alarm tone starts to sound.
After 1 additional minute on hold, the call is
disconnected.
R If another phone is connected to the...

Handset noise reduction
T his feature allows you to hear the voice of
the person you are talking to clearly, by
reducing the surrounding noise coming from
the other party’s telephone.
Press  MNOISE REDUCTION N to turn on/off
while talking.
Note:
R When this feature is turned on,   is
d

isplayed while talking.
R Depending on the environment where this
handset is being used, this feature may not
be effective.
R This feature is not available using the
speakerphone.
R When both the  “Equalizer ” setting...

Panasonic Ni-MH battery
p
erformance (supplied batteries)
during power back-up mode
When the batteries are fully charged,
operating time of the handset in power
back-up mode varies depending on usage.
– Continuous use of the handset in power back-up mode: 1.5 hours max.
– Continuous use of the handset other than a handset in power back-up mode: 2 hours
max.
– Not in use in power back-up mode: 2 hours max.
Note:
R Actual battery performance depends on
usage and ambient environment. Making calls during a...