Home > Panasonic > Cordless Telephone > Panasonic Kx Tg9371 Operating Instructions Manual

Panasonic Kx Tg9371 Operating Instructions Manual

Here you can view all the pages of manual Panasonic Kx Tg9371 Operating Instructions Manual. The Panasonic manuals for Cordless Telephone are available online for free. You can easily download all the documents as PDF.

Page 41

Voice Mail Service
41For assistance, please visit http://www.panasonic.com/help
Listening to voice mail 
messages
The unit lets you know that you have 
new voice mail messages in the 
following ways:
–“New Voice Mail” is displayed on 
the handset.
– The message indicator on the handset 
flashes slowly if message alert feature 
is turned on (“Message alert”; page 
39).
1Press {C}, then press {VM} within 
15 seconds.
OR
{MENU} i {#}{3}{3}{0}
LThe speakerphone turns on.
2Follow the pre-recorded...

Page 42

Intercom/Locator
42For assistance, please visit http://www.panasonic.com/help
Intercom
Intercom calls can be made:
– between handsets.
– between the handset and base unit.
(KX-TG9371/KX-TG9372)
Note:
LIf you receive an outside call while 
talking on the intercom, you hear 2 
tones.
To answer the call with the handset, 
press {OFF}, then press {C}.
LWhen paging unit(s) for an intercom 
call, the paged unit(s) beeps for 1 
minute.
Making an intercom call
1
{INTERCOM}
2{V}/{^}: Select the desired unit. i...

Page 43

Intercom/Locator
43For assistance, please visit http://www.panasonic.com/help
LTo put the outside call on hold, 
press {HOLD}. To resume the 
conference, press {Conf}.
Answering a transferred call
Press {C} to answer the page.
Note:
LAfter the paging party disconnects, 
you can talk to the outside caller.
Handset locator
You can locate a misplaced handset by 
paging it.
1Base unit:
{LOCATOR}
LAll registered handsets beep for 1 
minute.
2To stop paging:
Base unit:
Press {LOCATOR}.
Handset:
■KX-TG9361...

Page 44

Useful Information
44For assistance, please visit http://www.panasonic.com/help
Wall mounting
Base unit
1
Lead the telephone line cord through 
the hole in the wall mounting adaptor 
in the direction of the arrow.
2Tuck the telephone line cord inside 
the wall mounting adaptor (A). 
Connect the AC adaptor cord and 
telephone line cord (B).
3Insert the hooks on the wall 
mounting adaptor into the holes 1 
and 2 on the base unit.
4Adjust the adaptor to hold the base 
unit, then push it in the direction of...

Page 45

Useful Information
45For assistance, please visit http://www.panasonic.com/help
5Connect the telephone line cord. 
Mount the unit by inserting the 
mounting pins into the round 
openings on the adaptor (for pin 2, 
use the round cut out at the bottom 
of the adaptor if you are using the 4 
inch phone plate), then slide the unit 
down to secure it. Connect the AC 
adaptor to power outlet (page 12).
LThere are 2 common types of wall 
phone plates. The distance 
between 1 and 2 may vary 
depending on the...

Page 46

Useful Information
46For assistance, please visit http://www.panasonic.com/help
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
Display messageCause/solution
Busy
or
System is busy. Please 
try again later.LThe called handset or base unit is in use.
LOther units are in use and the system is busy. 
Try again later.
LThe handset you are using is too far from the 
base unit. Move closer and try again.
LThe handset’s registration may have been 
canceled....

Page 47

Useful Information
47For assistance, please visit http://www.panasonic.com/help
Troubleshooting
If you still have difficulties after following the instructions in this section, disconnect 
the base unit’s AC adaptor, then reconnect the base unit’s AC adaptor. Remove the 
batteries from the handset, and then insert the batteries into the handset again.
General use
*1 KX-TG9371/KX-TG9372
Programmable settings
ProblemCause/solution
The unit does not work.LMake sure the batteries are installed correctly...

Page 48

Useful Information
48For assistance, please visit http://www.panasonic.com/help
Battery recharge
Making/answering calls, intercomWhile programming, the 
handset starts to ring.LA call is being received. Answer the call and 
start again after hanging up.
I cannot register a handset to 
a base unit.LThe maximum number of handsets (6) is 
already registered to the base unit. Cancel 
unused handset registrations from the base unit 
(page 30).
LPlace the handset and the base unit away from 
other electrical...

Page 49

Useful Information
49For assistance, please visit http://www.panasonic.com/help
*1 KX-TG9371/KX-TG9372
Caller ID/Talking Caller ID*1
I cannot make long distance 
calls.LMake sure that you have long distance service.
ProblemCause/solution
Caller information is not 
displayed.LYou need to subscribe to Caller ID service. 
Contact your service provider/telephone 
company for details.
LIf your unit is connected to any additional 
telephone equipment such as a Caller ID box or 
cordless telephone line jack,...

Page 50

Useful Information
50For assistance, please visit http://www.panasonic.com/help
*1 KX-TG9371/KX-TG9372
Answering system (KX-TG9371/KX-TG9372)I cannot dial the phone 
number edited in the caller 
list.LThe phone number you dialed might have been 
edited incorrectly (for example, the long 
distance “1” or the area code is missing). Edit 
the phone number with another pattern (page 
32).
Time on the unit is shifted.LIncorrect time information from incoming Caller 
ID changes the time. Set the time...
Start reading Panasonic Kx Tg9371 Operating Instructions Manual

Related Manuals for Panasonic Kx Tg9371 Operating Instructions Manual

All Panasonic manuals