Panasonic Kx Tg6431 Operating Instructions Manual

Programming
21For assistance, please visit http://www.panasonic.com/help
*1 If you program these settings using one of the handsets, you do not need to program the same item using another handset.
Initial setting

Ringer setting Ringer volume
–
Ringer tone –
Silent mode
– On / Off
– Start / End 25
Set date / time Date and time
*113
Alarm 25
Time adjust
*1–
Talking CallerID Handset 28
Base unit
*1
Voice Mail Store V.M. no.*137
VM tone detect*137
Call block*1–2 6
Message alert –36
Display setting LCD...

Programming
22For assistance, please visit http://www.panasonic.com/help
Programming using the direct commands
1
{MENU } i  {#}
2Enter the desired feature code.
3Enter the desired setting code.  i { SAVE}
L This step may vary depending on the feature being programmed.
L To exit the operation, press  {OFF }.
Note:
L In the following table, < > indicates the default settings.
FeatureFeature 
codeSetting codeSystem 
setting*1Page
Alarm {7 }{2 }{0}{ 1}:  Once  {2 }:  Daily
{ 0 }: < Off > –25
Answer off {3...

Programming
23For assistance, please visit http://www.panasonic.com/help
Play new msg.
(msg.: messages){
3 }{2 }{3} ––3 3
Pre-recorded
(Reset to pre-
recorded greeting) {
3 }{0 }{4} – r32
Record 
greeting {
3 }{0 }{2} – r32
Recording time {3 }{0 }{5}{ 1}:  1min  {2 }:  2min
{ 3 }: < 3min >
{ 0 }:  Greeting only r
36
Register 
handset {
1 }{3 }{0} ––2 7
Remote code {3 }{0 }{6}  r34
Ring count {2 }{1 }{1}{ 2}– {7 }:  2 –7  rings < 4> 
{ 0 }:  Toll saver r
35
Ringer tone
*5, *6
(Handset) {
1 }{6 }{1}{ 1}–...

Programming
24For assistance, please visit http://www.panasonic.com/help
*1 If “System setting” column is checked, you do not need to program the same item using another handset.
*2 If you subscribe to a Caller ID service and want to view the caller’s information  after lifting up the handset to answer a call, turn off this feature.
*3 The handset can display the Internet address where you can download the  operating instructions or get further  information for this product, using your 
computer.
*4 Turn...

Programming
25For assistance, please visit http://www.panasonic.com/help
Special programming
Silent mode
Silent mode allows you to select a period 
of time during which the handset will not 
ring for outside calls. This feature is 
useful for time periods when you do not 
want to be disturbed, for example, while 
sleeping. Silent mode can be set for 
each handset.
Important:
LSet the date and time beforehand 
(page 13).
L We recommend turning the base unit 
ringer off (page 15) and call screening 
off...

Programming
26For assistance, please visit http://www.panasonic.com/help
4{V}/{^} : Select  “Tone/Melody ” or 
“Voice”.  i { SELECT }
5{V}/{^} : Select the desired item.
i  { SAVE}
L If you set a tone or melody, we 
recommend selecting a different 
one for outside calls.
6{OFF}
L When the alarm is set,  E is 
displayed.
Note:
L To stop the alarm, press any dial key 
or place the handset on the base unit 
or charger.
L When the handset is in use, the alarm 
will not sound until the handset is in 
standby...

Programming
27For assistance, please visit http://www.panasonic.com/help
Block calls without phone number
You can reject a call without phone 
number including “Out of area ”, 
“Private caller ”, or “Long 
distance ”.
1{MENU } i  {#}{2 }{4}{0}
2{V}/ {^}: Select the desired setting. 
i  { SAVE } i  { OFF }
Viewing/editing/erasing call block 
numbers
1{MENU } i  {#}{2 }{1}{7}
2{V}/ {^}: Select the desired entry.
L To exit, press  {OFF }.
3Proceed with the desired operation.
■ Editing a number:
{EDIT } i...

Caller ID Service
28For assistance, please visit http://www.panasonic.com/help
Using Caller ID service
Important:
LThis unit is Caller ID compatible. To 
use Caller ID features, you must 
subscribe to a Caller ID service. 
Contact your service provider/
telephone company for details.
Caller ID features
When an outside call is being received, 
the caller’s name and phone number are 
displayed.
Caller information for the last 50 callers 
is logged in the caller list from the most 
recent call to the...

Caller ID Service
29For assistance, please visit http://www.panasonic.com/help
Ringer ID
This feature can help you identify who is 
calling by using different ringers for 
different callers stored in the phonebook 
(page 18). You can assign a different 
ringer to each phonebook entry. When a 
call is received from a caller stored in the 
phonebook, the assigned ringer rings 
after the caller information is displayed.
Caller list
Important:
LOnly 1 person can access the caller 
list at a time.
L Make sure...

Caller ID Service
30For assistance, please visit http://www.panasonic.com/help
This feature can be turned on or off 
(page 22).
Note:
LPhone numbers from the 4 most 
recently edited area codes are 
automatically edited.
L If you move to another area, you can 
turn this feature off  to erase previously 
edited area codes. To use this feature 
again, turn it on and reprogram the 
area codes you want to edit once 
again.
Erasing selected caller 
information
1
{ MENU } i  {#}{2 }{1}{3}
2{V} /{^} : Select the...