Panasonic Kx Tg5230 Operating Instructions Manual

Useful Information
Answering System Preparation
61
Wall Mounting
For assistance, please call: 1-800-211-PANA(7262)
Telephone System
4Adjust the adaptor to hold the base unit, then push it in the direction of 
the arrow until it clicks into place.
5Connect the telephone line cord. Mount the unit, then slide it down.
•Raise the antennas.
6To charge the handset battery:
Place the handset on the base unit.
•The unit beeps once and the CHARGE indicator lights.
TG5230.fm  Page 61  Wednesday, February 4, 2004...

Wall Mounting
62
To remove the wall mounting adaptor
While pushing down the RELEASE LEVERS (A), remove the adaptor (B).
2
11
RELEASE
LEVERS
TG5230.fm  Page 62  Wednesday, February 4, 2004  9:51 AM 

Answering System Preparation
63For assistance, please call: 1-800-211-PANA(7262)
Telephone System
Useful Information
Direct Commands
 
After pressing [MENU], you can also program menu items directly by pressing ([0] 
to [9], [*] and [#]) instead of using the soft keys.
Menu item Command Selection items Page
Ringer volume[1] [1] [0] : Off  [1] : Low  [2] : Medium   
[3] : Highp. 18
Ringer tone 
(Handset)[1] [2] [1]–[3] : Tone pattern 1–3
[4]–[7] : Melody pattern 1–4p. 19
Incoming call tone...

Direct Commands
64
During programming:
When “
  ” or “  ” is displayed, press the right soft key to save the new 
settings.
To exit programming, press [OFF].
•If you press the direct command incorrectly, press [OFF], then re-enter 
programming mode by pressing [MENU].
• For function details, see the corresponding pages.
Menu item Command Selection items Page
Ringer tone 
(Base unit)[0] [*] [1] [1]–[3] : Tone pattern 1-3
[4]–[7] : Melody pattern 1-4p. 20
Incoming call tone
(Base unit)[0] [*] [2] [1] : On...

Answering System Preparation
65For assistance, please call: 1-800-211-PANA(7262)
Telephone System
Useful Information
Canceling Registration/Re-registration
Canceling the Handset Registration
If you no longer need to use the handset or if you want to use the handset with a 
different base unit of the same model, it is necessary to cancel the handset’s 
registration from the current base unit.
Only one handset can be canceled at a time.
Make sure the handset and the base unit near each other and are not...

Canceling Registration/Re-registration
66
Make sure the base unit and the other handsets are not being used. Have both 
the handset and base unit nearby during registration.
•You can stop registration by pressing [OFF] on the handset and pressing 
[LOCATOR/INTERCOM/TRANSFER] on the base unit.
•If “Wrong handset Refer to manual” is displayed, the handset you tried to 
register is not for this base unit. This handset is for KX-TG6500 base unit. The 
accessory handsets for this base unit are KX-TGA520 and...

Answering System Preparation
67For assistance, please call: 1-800-211-PANA(7262)
Telephone System
Useful Information
If the Following Appear on Your Display...
The following will be displayed when the unit needs your attention.
Display messageCause & Remedy
Recharge battery•The battery needs to be charged. Recharge the 
battery (p. 13).
Charge for 6 HRS•The battery has been discharged. The handset will 
not work. Fully charge the battery (p. 12).
No link to base.   
Move closer to      
base and try...

If the Following Appear on Your Display...
68
Display messageCause & Remedy
Phone book full
•When you tried to store an item in the phone book, 
the phone book memory was full. Press [OFF] to exit 
programming mode. To erase other items from the 
phone book, see page 38.
---Incomplete---
Tom Jones
098-765-4321
Phone book full
(The name/number is 
an example.)•
When the displayed item was sent to the destination 
handset, the phone book memory was full and 
copying stopped. If you tried to send all of the...

Answering System Preparation
69For assistance, please call: 1-800-211-PANA(7262)
Telephone System
Useful Information
If the Following Appear on Your Display...
Troubleshooting
If the handset display shows error messages, see “If the Following Appear on 
Your Display...” (p. 67–69) for the Cause & Remedy.
Display messageCause & Remedy
Wrong handset
Refer to manual•This handset is not for this base unit. This handset is 
for KX-TG6500 base unit. The accessory handsets 
for this base unit are KX-TGA520 and...

Troubleshooting
70
The handset display is blank.•If the handset display is blank, fully charge 
the battery (p. 12).
You cannot program any 
function items.•Programming is not possible while the 
handset and/or base unit is being used.
•Do not pause for over 60 seconds while 
programming.
•Walk closer to the base unit.
While programming or 
searching, the handset or 
base unit starts to ring and the 
program/search stops.•A call is coming in. To answer the call, press 
[
C], [s] or [SP-PHONE]. Start...