Panasonic Kx Tg5210 Operating Instructions Manual

Press [2].
Press [2].
Press [2].
Press [2].
Useful Information Answering System Preparation
61
Remote Operation from a Touch Tone Phone
For assistance, please call: 1-800-211-PANA(7262)
Telephone System
Press [1].
Press [1].
Press [1].
Press [1].
Voice Menu
The shaded parts are voice prompts.
•3 seconds after playback, the voice menu will start again from the beginning.
•The unit will announce the remaining recording time after playback if it is less than 
3 minutes.
•If you hear “Memory full” after...

Remote Operation from a Touch Tone Phone
62
Direct Remote Operation
Once you have accessed one of the mailboxes (p. 59), you can also control your 
unit by direct commands instead of using the voice menu. To end the remote 
operation, hang up at anytime.
Direct commands
Turning on the Answering System
Call your unit and wait for 15 rings.
•The unit will answer and the greeting will be played.
•The Answering System will be turned on. Hang up or enter the remote code for 
other options.
•When turning on...

Answering System Preparation
63For assistance, please call: 1-800-211-PANA(7262)
Telephone System
Useful Information
Belt Clip 
You can hang the handset on your belt or pocket using the included belt clip.
To attach the belt clip To remove the belt clip 
Optional Headset
Connecting an optional headset to the handset allows hands-free phone 
conversation. Please use only a Panasonic KX-TCA60, KX-TCA86, KX-TCA88, 
KX-TCA88HA, KX-TCA91, KX-TCA92, or KX-TCA98 headset. To order, call the 
accessories...

64
Wall Mounting
Base unit
This unit can be mounted on a wall phone plate.
1Connect the AC adaptor. 
2Tuck the telephone line cord inside the wall mounting adaptor (A). 
Connect the telephone line cord (B).
3Insert the hooks on the wall mounting adaptor into the holes (A) and 
(
B) on the base unit.
To  P o w e r  
Outlet 
2
1
A
BAB 

Useful Information
Answering System Preparation
65
Wall Mounting
For assistance, please call: 1-800-211-PANA(7262)
Telephone System
4Adjust the adaptor to hold the base unit, then push it in the direction of 
the arrow until it clicks into place.
5Connect the telephone line cord. Mount the unit, then slide it down.
•Raise the antennas.
6To charge the handset battery:
Place the handset on the base unit.
•The unit beeps once and the CHARGE indicator lights. 

Wall Mounting
66
To remove the wall mounting adaptor
While pushing down the RELEASE LEVERS (A), remove the adaptor (B).
Charger unit (KX-TG5212/KX-TG5213 only)
The charger can be wall mounted. Connect the AC adaptor. Install screws using the 
wall template (see below). Mount the charger (
A). Slide it down (B), then slide 
down to the right (
C) until it is secured.
2
11
RELEASE
LEVERS
A
B
C
Screws 
To  P o w e r  
Outlet 2.45 cm
(
31⁄32)
2.45 cm 
(31⁄32)Wall Template for the Charger unit 

Answering System Preparation
67For assistance, please call: 1-800-211-PANA(7262)
Telephone System
Useful Information
Direct Commands
 
After pressing [MENU], you can also program menu items directly by pressing ([0] 
to [9], and [#]) instead of using the soft keys.
Menu item Command Selection items Page
Ringer volume[1] [1] [0] : Off  [1] : Low  [2] : Medium   
[3] : Highp. 20
Ringer tone [1] [2] [1]–[3] : Tone pattern 1–3
[4]–[7] : Melody pattern 1–4
[8]–[9] : Downloaded melody
pattern 1–2 *
1
p. 21...

68
Direct Commands
During programming:
When “   ” or “   ” is displayed, press the right soft key to save the new 
settings.
To exit programming, press [OFF].
•If you press the direct command incorrectly, press [OFF], then re-enter 
programming mode by pressing [MENU].
• For function details, see the corresponding pages.
*
1You need to first download melody data from the openLCR web site.
*2This feature can be used to activate Caller IQ. See the leaflet included with this  
unit for more information.
*...

Answering System Preparation
69For assistance, please call: 1-800-211-PANA(7262)
Telephone System
Useful Information
Canceling Registration/Re-registration
•“[-]” is shown on the top right of the display. 
•After canceling registration, the handset cannot be used. If you want to use it 
again, register the handset to the base unit by performing steps 5 and 6 on 
page 70. 
Re-registering the Handset
If you want to re-register the handset to the base unit or a different base unit of the 
same model, you...

Canceling Registration/Re-registration
70
•You can stop registration by pressing [OFF] on the handset and pressing 
LOCATOR/INTERCOM [ ], [], [], [] or [] on the base unit.
•If “Wrong handset Refer to manual” is displayed, the handset you tried to 
register is not for this base unit. This handset is for KX-TG6500 base unit. The 
accessory handsets for this base unit are KX-TGA520 and KX-TGA523. To order, 
see page 3.
5Base unit: Press and hold LOCATOR/INTERCOM [ ], [], [], [] 
or [] for 3 seconds.
•The...