Panasonic Kx Tg4731 Operating Instructions Manual

Setting up
Connections
R
U
se only the supplied Panasonic AC
adaptor PNLV226.
n Base unit *DSL/ADSL filter (not supplied) is required if
y

ou have DSL/ADSL service.
n Charger Battery installation
R U

SE ONLY Ni-MH batteries AAA (R03)
size.
R Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
R Confirm correct polarities ( ,  ).
R
W
hen the date and time setting is
displayed, see page 15. Battery charging
C

harge for about 7 hours.
R When the batteries are fully charged,
“Fully charged ” is displayed. For...

Note when setting up
Note for connections
R
T
he AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become
disconnected. During a power failure
R
T

he unit will not work during a power
failure. We recommend connecting a
corded-type telephone (without AC...

Controls
Handset
Ringer indicator
M
essage indicator Speaker
MjN
/M
kN  (VOL.: Volume up/down) M N
 (
SP-PHONE: Speakerphone) M N
 
(TALK) Headset jack
Dial keypad (
*:
  TONE)Receiver
Display M
C
ALL WAIT NMFLASH N M
O
FF N Microphone
Charge contacts
n C

ontrol type  
S
oft keys
The handset features 3 soft keys. By
pressing a soft key, you can select the
feature shown directly above it on the
display.  
N
avigator key
– MD N,  MC N,  MF N, or  ME N: Scroll through
various lists and items.
–  (Volume:...

M N
 (PLAY)
Message indicator M
L
OCATOR NM
A
NSWER ON/OFF N
ANSWER ON/OFF indicator n
 
KX-TG4741/KX-TG4761 series
(page 3) Charge contacts
Speaker
M
H
OLD N M CONF N (Conference) M
R
EDIAL N M PAUSE N M
F
LASH N M CALL WAIT NM
S
P-PHONE N (Speakerphone)
SP-PHONE indicator M
E
RASE N M MUTE N M
A
NSWER ON/OFF N
ANSWER ON/OFF indicator M
L
OCATOR N M INTERCOM N M
n N 
(STOP) M N
 
(PLAY)
Message indicator MjN
/M
kN  (VOL.: Volume up/down)
M N
/M N
 
(Repeat/Skip) Message counter
Microphone
Dial keypad (...

Display
Handset display items
Item Meaning
Within base unit range
Out of base unit range
The line is in use.
R
W
hen flashing:
The call is put on hold.
R When flashing rapidly: An
incoming call is now being
received. Eco mode is on. (page 12)
Equalizer is set. (page 20)
Speakerphone is on.
(

page 17) Ringer volume is off.
(

page 26) Silent mode is on. (page 29)
Call sharing mode is off.
(

page 27) Alarm is on. (page 29)
Handset number
Battery level
Blocked call (page 30)
Clarity booster is on.
(

page...

Note:
R
W
hen English is selected as the display
language, 12-hour clock format is used.
When Spanish is selected, 24-hour clock
format is used.
R The date and time may be incorrect after a
power failure. In this case, set the date and
time again. Display language
Y
 ou can select either  “English ” or
“ Español ”as the display language. The
default setting is  “English ”.
1 MMENU N#110
2 Mb N: Select the desired setting.  a
M SAVE N
3 MOFF N Voice guidance language
Y
 ou can select either  “English ”...

Making calls
Using the handset
1
L
ift the handset and dial the phone
number.
R To correct a digit, press  MCLEAR N.
2 Press  M N
 
or  MCALL N.
3 When you finish talking, press  MOFF N or
place the handset on the base unit or
charger. Using the speakerphone
1
D

ial the phone number and press  M N
.
R S

peak alternately with the other party.
2 When you finish talking, press  MOFF N.
Note:
R For best performance, use the
speakerphone in a quiet environment.
R To switch back to the receiver, press  M N...

Example: 
If you need to dial the line access
number “9” when making outside calls with a
PBX:Handset
1 9 a  M P

AUSEN
2 Dial the phone number.  a M N
Base unit
*
 1
*1 KX-TG4741/KX-TG4761 series: page 3
1 MSP-PHONE N
2 9 a  M PAUSE N
3 Dial the phone number.
Note for handset and base unit:
R A 3.5 second pause is inserted each time
MPAUSE N is pressed. Answering calls
Using the handset
W

hen a call is being received, the ringer
indicator flashes rapidly.
1 Lift the handset and press  M N
 
or  M N
w...

R
The base unit user can take the call by
pressing  MSP-PHONE N.*1
*1 KX-TG4741/KX-TG4761 series: page 3 Base unit
*
 1
*1 KX-TG4741/KX-TG4761 series: page 3
1 Press  MHOLD N during an outside call.
2 To release hold, press  MSP-PHONE N.
R A handset user can take the call by
pressing  M N
.
N

ote for handset and base unit:
R If a call is kept on hold for more than 9
minutes, an alarm tone starts to sound and
the ringer indicator on the handset flashes
rapidly. After 1 additional minute on hold,
the call...

Handset / Base unit
* 1
*1 KX-TG4741/KX-TG4761 series: page 3
Press  * (TONE) before entering access
numbers which require tone dialing. Handset clarity booster
T
 his feature can improve sound clarity when
the handset is used in an area where there
may be interference. During an outside call,
this feature is turned on automatically when
necessary.
R When this feature is turned on,   is
d

isplayed. Handset equalizer
T
 his feature clarifies the voice of the person
you are talking to, producing a more...