Home > Panasonic > Answering Machine > Panasonic Kx Tg4321 Operating Instructions Manual

Panasonic Kx Tg4321 Operating Instructions Manual

Here you can view all the pages of manual Panasonic Kx Tg4321 Operating Instructions Manual. The Panasonic manuals for Answering Machine are available online for free. You can easily download all the documents as PDF.

Page 41

Useful Information
41For assistance, please visit http://www.panasonic.com/help
5Connect the telephone line cord. 
Mount the unit by inserting the 
mounting pins into the round 
openings on the adaptor (for pin 2, 
use the round cut out at the bottom 
of the adaptor if you are using the 4 
inch phone plate), then slide the unit 
down to secure it. Connect the AC 
adaptor to power outlet (page 10).
LThere are 2 common types of wall 
phone plates. The distance 
between 1 and 2 may vary 
depending on the...

Page 42

Useful Information
42For assistance, please visit http://www.panasonic.com/help
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
Display messageCause/solution
Busy
or
System is busy. Please 
try again later.LThe called handset or base unit is in use.
LOther units are in use and the system is busy. 
Try again later.
LThe handset you are using is too far from the 
base unit. Move closer and try again.
LThe handset’s registration may have been 
canceled....

Page 43

Useful Information
43For assistance, please visit http://www.panasonic.com/help
Troubleshooting
If you still have difficulties after following the instructions in this section, disconnect 
the base unit’s AC adaptor, then reconnect the base unit’s AC adaptor. Remove the 
batteries from the handset, and then insert the batteries into the handset again.
General use
Programmable settings
ProblemCause/solution
The unit does not work.LMake sure the batteries are installed correctly 
(page 11).
LFully charge...

Page 44

Useful Information
44For assistance, please visit http://www.panasonic.com/help
Battery recharge
Making/answering calls, intercomWhile programming, the 
handset starts to ring.LA call is being received. Answer the call and 
start again after hanging up.
I cannot register a handset to a 
base unit.LThe maximum number of handsets (4) is 
already registered to the base unit. Cancel 
unused handset registrations from the base 
unit (page 26).
LPlace the handset and the base unit away 
from other electrical...

Page 45

Useful Information
45For assistance, please visit http://www.panasonic.com/help
Caller ID
ProblemCause/solution
Caller information is not 
displayed.LYou need to subscribe to Caller ID service. 
Contact your service provider/telephone 
company for details.
LIf your unit is connected to any additional 
telephone equipment such as a Caller ID box 
or cordless telephone line jack, plug the unit 
directly into the wall jack.
LIf you use a DSL/ADSL service, we 
recommend connecting a DSL/ADSL filter 
between...

Page 46

Useful Information
46For assistance, please visit http://www.panasonic.com/help
Answering systemThe 2nd caller’s information is 
not displayed during an outside 
call.LIn order to use Caller ID, call waiting, or Call 
Waiting Caller ID (CWID), you must first 
contact your service provider/telephone 
company and subscribe to the desired 
service.
After subscribing, you may need to contact 
your service provider/telephone company 
again to activate this specific service, even if 
you already subscribed to...

Page 47

Useful Information
47For assistance, please visit http://www.panasonic.com/help
Liquid damage
Caution:
LTo avoid permanent damage, do not use a microwave oven to speed up the drying 
process. While recording a greeting 
message or listening to 
messages, the unit rings and 
recording stops.LA call is being received. Answer the call and 
try again later.
ProblemCause/solution
Liquid or other form of moisture 
has entered the handset/base 
unit.LDisconnect the AC adaptor and telephone line 
cord from the...

Page 48

Useful Information
48For assistance, please visit http://www.panasonic.com/help
FCC and other information
This equipment complies with Part 68 
of the FCC rules and the requirements 
adopted by the ACTA. On the bottom 
of this equipment is a label that 
contains, among other information, a 
product identifier in the format 
US:ACJ----------.
If requested, this number must be 
provided to the telephone company.
L Registration No. ............(found on 
the bottom of the unit)
L Ringer Equivalence No....

Page 49

Useful Information
49For assistance, please visit http://www.panasonic.com/help
about what will disable alarm 
equipment, consult your telephone 
company or a qualified installer.
This equipment is hearing aid 
compatible as defined by the FCC in 
47 CFR Section 68.316.
When you hold the phone to your ear, 
noise might be heard in your Hearing 
Aid. Some Hearing Aids are not 
adequately shielded from external RF 
(radio frequency) energy. If noise 
occurs, use the speakerphone option 
(if applicable)...

Page 50

Useful Information
50For assistance, please visit http://www.panasonic.com/help
Notice 
ENERGY STAR 
As an 
ENERGY STA R® Participant, 
Panasonic has determined that this 
product meets the 
ENERGY STAR 
guidelines for energy efficiency. 
ENERGY STAR is a U.S. registered 
mark.
interference is experienced, move the 
cordless telephone further away from 
the TV or VCR. This will often reduce, 
or eliminate, interference.
FCC RF Exposure Warning:
L This product complies with FCC 
radiation exposure limits...
Start reading Panasonic Kx Tg4321 Operating Instructions Manual

Related Manuals for Panasonic Kx Tg4321 Operating Instructions Manual

All Panasonic manuals