Panasonic Kx Tg2750 Operating Instructions Manual

51For assistance, please call: 1-800-211-PANA(7262)
Useful Information
Belt ClipHandset
You can hang the cordless handset on your belt or pocket using the belt clip.
To attach the belt clip To remove the belt clip
Optional Headset
Plugging the optional headset into the cordless handset allows for hands-free 
phone conversation. Please use only a Panasonic KX-TCA60, KX-TCA86, 
KX-TCA88, KX-TCA91, KX-TCA92 or KX-TCA98 headset. To order, call the 
accessories telephone number on page 2.
Connecting an...

52
Wall Mounting
This unit can be mounted on a wall phone plate.
1Pull down the handset hook until it locks, so 
the tab holds the handset. 
2Press the tabs in the direction of the arrows ( ), then remove 
the wall mounting adaptor ( ).
3Connect the AC adaptor. Tuck the telephone line cord inside 
the wall mounting adaptor, then push it in the direction of the 
arrows ( ) and ( ). 
•The word “UP WALL” should face upward.
Wall Template for the Charger unit
1
2
2
11
12
To  P ower 
Outlet
11
22
2.45 cm(15⁄16) 

53
Wall Mounting
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
4Connect the telephone line cord. 
Mount the base unit, then slide 
down. 
•Raise the antennas.
Charger unit
The charger can be wall mounted. Connect the AC adaptor. Install screws 
using the wall template (p. 52). Mount the charger ( ). Slide it down ( ), 
then slide down to the right ( ) until it is secured.
To temporarily set the handset down 
during a conversation, place it as shown 
here.
12
3
$
#
%
To  P ower...

54
Canceling Registration/Re-registration
Canceling the Handset Registration
If you no longer need to use the cordless handset or if you want to use the cordless 
handset with a different base unit of the same model, it is necessary to cancel the 
registration from the current base unit.
Only one cordless handset can be canceled at a time near the base unit.
Make sure the cordless handset and the base unit are not being used.
•“[-]” is shown on the top right of the display. 
•After canceling...

55
Canceling Registration/Re-registration
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
Re-registering the Handset
If you want to re-register the cordless handset to the base unit or a different base 
unit of the same model, you need to register it to that base unit. The cordless 
handset will be given a new extension number of that base unit. Only one cordless 
handset can be registered at a time near the base unit. 
Make sure the base unit and the other cordless handsets are not...

56
If the Following Appear on Your Display...
If the unit detects a problem, one of the following messages will be displayed on the 
base unit or the cordless handset. Error beeps or a busy tone will sound.
Display messageCause & Remedy
Recharge battery(cordless handset only)•The battery needs to be charged. Recharge the 
battery (p. 12).
Charge for 15HRS(cordless handset only)•The battery has been discharged. The cordless 
handset will not work. Charge the battery fully (p. 12).
No link to base.
Walk...

57
If the Following Appear on Your Display...
Useful Information
For assistance, please call: 1-800-211-PANA(7262) System is busy.
Please try again
later.•If radio communication between the cordless 
handset and the base unit is partially impaired, this 
display will be shown.
---Incomplete---
Tom Jones
098-765-4321
 Directory full
(The name/number is 
an example.)•When the displayed item is being sent to the 
destination unit, the directory memory is full and the 
transfer is stopped. If you tried to...

If the Following Appear on Your Display...
58
     Error!!
8 handsets have
already been
registered.
(cordless handset only)•8 cordless handsets have already been registered to 
the base unit. To cancel another handset registration, 
see page 54. 
•This base unit has the memory of the cordless 
handset currently registered to another base unit. 
Erase the handset memory from the base unit. 
For KX-TG2750S base unit: 
(1) Press [FUNCTION/EDIT], (2) Press [MUTE], 
(3) Enter “335#” and (4) Enter that handset...

59For assistance, please call: 1-800-211-PANA(7262)
Useful Information
Troubleshooting
If the display shows error messages, see “If the Following Appear on Your 
Display...” (p. 56–58) for the Cause & Remedy.
Problem Cause & Remedy
The unit does not work. • Check the settings (p. 10–12).
•Check whether the dialing mode setting is 
correct (p. 17).
•Charge the battery fully (p. 11).
•Clean the charge contacts and charge again 
(p. 12).
•Install the battery properly (p. 11).
•Unplug the base unit’s AC...

Troubleshooting
60
You cannot program function 
items.•Programming is not possible while the unit is 
being used.
•Do not pause for over 60 seconds while 
programming.
•Walk closer to the base unit if you are using 
the cordless handset.
•If more than three other units are in use, you 
may not be able to program with the base unit 
or cordless handset. Try again later.
•If 2-Way Radio mode is on on your cordless 
handset, turn it off (p. 43).
You cannot make an intercom/
external call.•If more than one...