Panasonic Kx Tg2750 Operating Instructions Manual

Advanced Operation
41For assistance, please call: 1-800-211-PANA(7262)
Call Privacy Feature
To prevent other users from joining your conversation, turn this feature on during a 
call. To allow other users to join your conversation, leave the feature off. 
To turn the Call Privacy Feature on
Base unit: Press [PRIVACY] while talking.
Cordless handset: Press the soft key ( ) while talking.
•“PRIVACY” will be displayed.
•To turn the feature off, press [PRIVACY] on the base unit or press the soft key 
() on...

Room Monitor Feature
42
•You can also turn on/off the base unit Room Monitor feature, by using the cordless 
handset. Perform the following steps:
(1) Press [CONF/FUNCTION]. 
(2) Scroll to “Initial setting” by pressing [] or [], then press [].
(3) Scroll to “Set base unit” by pressing [] or [], then press [].
(4) Scroll to “Room monitor” by pressing [] or [], then press [].
(5) Select “On” or “Off” by pressing [] or [], press
 the soft key (), and 
press [OFF].
To monitor with 
The destination cordless...

Advanced Operation
43For assistance, please call: 1-800-211-PANA(7262)
2-Way Radio Communication
(When the System Has Additional Handsets) 
If you purchase one or more additional cordless handsets (KX-TGA270S, 
KX-TGA271B, KX-TGA271V, KX-TGA271W and KX-TGA273S) (p. 20), you can 
use this feature. A cordless handset user can talk with another cordless handset 
user regardless of the base unit location. 2-Way Radio communication, which is the 
direct communication between a pair of cordless handsets, does...

44
2-Way Radio Communication
To call another cordless handset
Make sure 2-Way Radio mode is on on your cordless handset and the 
destination cordless handset, and the displays show “
2Way radio mode”.
•To adjust the receiver volume (High, Medium or Low) or speaker volume (6 levels) 
while talking, press [] or [].
To adjust the ringer volume for 2-Way Radio mode (High, Medium, 
Low or OFF):
To increase ringer volume, press [] while the cordless handset is not in 
use. To decrease ringer volume, press []....

Advanced Operation
45For assistance, please call: 1-800-211-PANA(7262)
Voice Mail Service
Voice mail is an electronic on-line answering service offered by your telephone 
company. If you subscribe to this service, the voice mail system can answer calls for 
you when you are unavailable to answer the phone or when your line is busy. 
Callers can leave messages that are saved in virtual voice mail boxes, which are 
maintained for you at the phone company, allowing you to listen to your messages 
whenever...

Voice Mail Service
46
Setting Voice Mail (VM) Tone Detection
(use either   or  )
Your telephone company sends special signals (Voice mail tones) to activate the 
VM indicator. Lift the base unit handset, or press [DIGITAL SP-PHONE], [] or 
[] to listen to the dial tone. If you hear a series of dial tones followed by a 
continuous dial tone, this indicates that a new message was recorded. Voice Mail 
detection is preset at the factory to ON. Minutes after you hang up or after the 
phone stops ringing,...

47
Voice Mail Service
Advanced Operation
For assistance, please call: 1-800-211-PANA(7262)
Listening to Voice Mail Messages 
The unit will let you know that someone has left voice mail for you in three ways; 
(a) VM indicator will flash on the base unit,
(b) “Voice mail” will be displayed on the cordless handset, and
(c) “
  ” will flash on the cordless handset. 
To listen to your voice mail message(s), follow the steps below.
•If “Store VM access#” is displayed and 3 beeps sound, store the number (p....

48
Special Features
Muting Your  Conversation 
During a call, you can mute your phone so the other par ty cannot listen to you. When 
muting your conversation, you can hear the other par ty.
Base unit: Press [MUTE]. 
•The MUTE indicator lights.
•“Mute” will be displayed for a few seconds.
•To release the mute, press [MUTE] again.
•If you press [DIGITAL SP-PHONE] or lift the handset to switch between the 
speaker and handset, the mute will be released.
Cordless handset: Press the soft key ( ).
•“Mute”...

49
Special Features
Advanced Operation
For assistance, please call: 1-800-211-PANA(7262)
Using the PAUSE Button (For PBX Line/Long Distance 
Calls)
 
We recommend you press [REDIAL/PAUSE] on the base unit or [PAUSE/REDIAL] 
on the cordless handset if a pause is required for dialing with a PBX or to make a 
long distance call.
Ex. Line access number [9] (PBX)
[9]  
[REDIAL/PAUSE] or [PAUSE/REDIAL]  
•Pressing [REDIAL/PAUSE] or [PAUSE/REDIAL] once creates a 3.5 second 
pause. This prevents misdialing when...

Special Features
50
FLASH Button
Pressing [FLASH/CALL WAIT] also allows you to use special features of your host 
PBX such as transferring an extension call or accessing optional telephone 
services such as call waiting. 
•Pressing [FLASH/CALL WAIT] cancels the Temporary Tone Dialing mode or the 
mute (p. 48).
Selecting the flash time (use either   or  )
The flash time depends on your telephone exchange or host PBX. 
You can select the following flash times: “700, 600, 400, 300, 250, 110, 100 or 90 
ms...