Panasonic Kx Tg2620 Operating Instructions Manual

Multi-unit Operation
For assistance, please visit http://www.panasonic.com/phonehelp31
Transferring calls 
between handsets, 
conference calls
Outside calls can be transferred between 2 
handsets. 2 handsets can have a 
conference call with an outside party.
1During an outside call, press 
{INTERCOM} to put the call on hold.
2Press the right soft key.
3Wait for the paged party to answer.
LIf the paged party does not answer, 
press {C} to return to the outside 
call.
4To complete the transfer, press...

Multi-unit Operation
32For assistance, please visit http://www.panasonic.com/phonehelp
Registering a handset
The included handset and base unit are 
preregistered. If for some reason the 
handset is not registered to the base unit, 
register the handset.
KX-TG2620/KX-TG2621
1Handset:
{MENU} i {0}{0}
2Base unit:
Press and hold {HANDSET 
LOCATOR} until the CHARGE 
indicator flashes.
LAfter the CHARGE indicator starts 
flashing, the rest of the procedure 
must be completed within 1 minute.
3Handset:
Press...

Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp33
Wall mounting
Base unit
Connect the telephone line cord. Mount 
the unit by inserting the mounting pins into 
the round openings on the adaptor (for pin 
2, use round cut out at the bottom of the 
adaptor if you are using the 4 inches 
phone plate), then sliding the unit down to 
secure it.
Connect the AC adaptor to power outlet 
(page 10).
LThere are two common types of wall 
phone plates. The distance between 1 
and 2...

Useful Information
34For assistance, please visit http://www.panasonic.com/phonehelp
Headset (optional)
Connecting a headset to the handset 
allows hands-free phone conversations. 
Please use only a Panasonic headset 
(page 9).
LHeadset shown is KX-TCA86.
Switching a call between the headset 
and speakerphone
To switch to the speakerphone, press {s}. 
To return to the headset, press {C}. Available model:
KX-TG2621
PQQX14928XA ITI_2.book  Page 34  Wednesday, August 23, 2006  10:44 AM 

Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp35
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
*1 KX-TG2622
Display messageCause/solution
BusyLAnother handset or the called handset is in use.
*1
LThe handset you tried to copy phonebook items to is in 
use.*1
LThe handset you are calling is too far from the base unit.*1
Error!!LThe handset’s registration has failed. Move the handset 
and base unit away from all...

Useful Information
36For assistance, please visit http://www.panasonic.com/phonehelp
Troubleshooting
General use
Programmable settings
Battery recharge
ProblemCause/solution
The unit does not work.LMake sure the battery is installed correctly and fully 
charged (page 12).
LCheck the connections (page 11).
LUnplug the base unit’s AC adaptor to reset the unit. 
Reconnect the adaptor and try again.
LThe handset has not been registered to the base unit. 
Register the handset (page 32).
I cannot hear a dial...

Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp37
Making/answering calls, intercom
Phonebook
ProblemCause/solution
Static is heard, sound 
cuts in and out. 
Interference from other 
electrical units.LMove the handset and the base unit away from other 
electrical appliances.
LMove closer to the base unit.
LRaise the base unit antenna.
LTurn on the clarity booster feature (page 19).
LIf your unit is connected to a telephone line with DSL 
service, we recommend connecting...

Useful Information
38For assistance, please visit http://www.panasonic.com/phonehelp
Caller ID
ProblemCause/solution
The handset does not 
display the caller’s name 
and/or phone number.LYou have not subscribed to Caller ID service. Contact 
your telephone company to subscribe.
LIf your unit is connected to any additional telephone 
equipment such as a Caller ID box or cordless 
telephone jack, disconnect the unit from the equipment 
and plug the unit directly into the wall jack.
LIf your unit is...

Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp39
FCC and other information
This equipment complies with Part 68 of 
the FCC rules and the requirements 
adopted by the ACTA. On the bottom of 
this equipment is a label that contains, 
among other information, a product 
identifier in the format US:ACJ----------.
If requested, this number must be 
provided to the telephone company.
L Registration No
    ............(found on the bottom of the unit)
L Ringer Equivalence...

Useful Information
40For assistance, please visit http://www.panasonic.com/phonehelp
line, ensure the installation of this 
equipment does not disable your alarm 
equipment. If you have questions about 
what will disable alarm equipment, 
consult your telephone company or a 
qualified installer.
This equipment is hearing aid compatible 
as defined by the FCC in 47 CFR Section 
68.316.
When you hold the phone to your ear, 
noise might be heard in your Hearing Aid. 
Some Hearing Aids are not adequately...