Panasonic Kx Tg2388 Operating Instructions Manual

Programmable Settings
For assistance, please visit http://www.panasonic.com/consumersupport41
3Scroll to “Set base unit” by pressing 
{V} or {^}, then press {Select}.
4Scroll to “Incoming call.” by 
pressing {V} or {^}, then press 
{Select}.
5Select “On”, “Off” or “2” by pressing {V} 
or {^}.
6Press {Save}, then press {OFF}.
Display setting
Handset LCD contrast
You can adjust the handset display 
contrast. There are 6 levels.
1Press {MENU}.
2Scroll to “Initial setting” by 
pressing {V} or {^}, then press...

Programmable Settings
42For assistance, please visit http://www.panasonic.com/consumersupport
2Scroll to “Initial setting” by 
pressing {V} or {^}, then press 
{Select}. 
3Scroll to “Set base unit” by pressing 
{V} or {^}, then press {Select}.
4Scroll to “Talk Caller ID” by 
pressing {V} or {^}, then press 
{Select}.
5Select “Off” or “On” by pressing {V} or 
{^}.
6Press {Save}, then press {OFF}.
Initial setting
Caller ID edit
Using the handset
You can turn the Caller ID number auto 
edit feature (page...

Programmable Settings
For assistance, please visit http://www.panasonic.com/consumersupport43
4Select “Off” or “On” by pressing {V} or 
{^}.
5Press {Save}, then press {OFF}.
Auto talk
When this feature is turned on, you can 
answer a call by lifting the handset off the 
base unit or charger without pressing {C} 
or {s}.
1Press {MENU}.
2Scroll to “Initial setting” by 
pressing {V} or {^}, then press 
{Select}. 
3Scroll to “Auto talk” by pressing {V} 
or {^}, then press {Select}.
4Select “On” or “Off” by...

Programmable Settings
44For assistance, please visit http://www.panasonic.com/consumersupport
Accessibility
Talking Keypad
Talking Keypad is a feature that 
announces phone numbers that you dial, 
allowing you to confirm dialed numbers 
audibly before making calls. You can turn 
this feature on or off for the handset and 
base unit separately.
While handset Talking Keypad is turned 
on, the handset announces each dialing 
button you press when pre-dialing 
(page 16).
While base unit Talking Keypad is...

Programmable Settings
For assistance, please visit http://www.panasonic.com/consumersupport45
2Scroll to “Accessibility” by 
pressing {V} or {^}, then press 
{Select}. 
3Scroll to “Hearing Aid Mode” by 
pressing {V} or {^}, then press 
{Select}.
4Select “Telecoil” or “Off” by 
pressing {V} or {^}.
5Press {Save}, then press {OFF}.
Note:
LWhen “Telecoil” is selected, “[HA]” is 
displayed after you press {C}.
LIf “Telecoil” is selected, the battery 
operating time will be shortened 
(page 10).
LIf...

Answering System Features
46For assistance, please visit http://www.panasonic.com/consumersupport
Answering system
The unit contains an answering system 
which can answer and record calls for you 
when you are unavailable to answer the 
phone.
For details about memory capacity, see 
page 52.
Important:
LOnly 1 person can access the answering 
system (listen to messages, record a 
greeting message, etc.) at a time.
LWhen callers leave messages, the unit 
records the day and time of each 
message. Make...

Answering System Features
For assistance, please visit http://www.panasonic.com/consumersupport47
4To stop recording, press {GREETING 
REC} or {STOP}.
LTo change the greeting, start again 
from step 1. 
Note:
LYou can use the enhanced recording 
mode for clearer sound, if necessary 
(p. 55).
LIf “ ” is displayed, 6 beeps sound and 
“Your greeting was not recorded. Record 
your greeting again.” is announced, start 
again from step 1.
LTo adjust the speaker volume, press 
VOLUME {} during playback.
L9...

Answering System Features
48For assistance, please visit http://www.panasonic.com/consumersupport
4Press {OFF}.
LTo turn the Answering System off, press 
{0} in step 3. “Answer off” is heard.
Screening your calls
While a caller is leaving a message, you 
can listen to the call through the base unit’s 
speaker. To adjust the speaker volume, 
press VOLUME {>} or VOLUME {

Answering System Features
For assistance, please visit http://www.panasonic.com/consumersupport49
Note:
LThe display shows the message number 
during playback.
LDuring playback, the unit will announce 
the day and time that each message 
was recorded. (Voice time/day stamp)
LAt the end of the last message, the unit 
announces “End of final message”.
LIf a call is received during playback, the 
unit rings and playback stops. To answer 
the call, press {SP-PHONE}. For 
playback, start again from the...

Answering System Features
50For assistance, please visit http://www.panasonic.com/consumersupport
If “New message” is displayed on the 
handset, new messages have been 
recorded.
LIf the Message Alert is turned on 
(page 55), the Ringer/Message Alert 
indicator on the handset will flash slowly 
when new messages have been 
recorded and the handset is not in use.
1Press {MENU}.
2Press {Select} at “Message play”.
LThe unit announces the number of 
new messages and only new 
messages are played back from...