Panasonic Kx Tg2258 Operating Instructions Manual

 
Useful Information
 
For assistance, please call: 1-800-211-PANA(7262) 
51 
Wall Mounting 
This unit can be mounted on a wall phone plate. 
1 
Push the hook and turn it 
around. Turn the hook until a 
click is heard. 
2 
Press the tabs in the direction 
of the arrows ( ), then remove 
the wall mounting adaptor ( ).   
  
3 
Connect the AC adaptor. Tuck 
the telephone line cord inside 
the wall mounting adaptor, then 
push the adaptor in the direction 
of the arrows (  and  ). 
•The word “UP WALL”...

 
52 
Belt Clip 
You can hang the handset on your belt or pocket using the included belt clip. 
To attach the belt clip To remove the belt clip   
Optional Headset 
Connecting an optional headset to the handset allows hands-free phone 
conversation. Use only a Panasonic KX-TCA60, KX-TCA86, KX-TCA88, 
KX-TCA91, KX-TCA92, or KX-TCA98 headset. To order, call the accessories 
telephone number on page 2. 
Connecting an optional headset to the handset 
Open the headset jack cover, and insert the headset plug...

 
Useful Information
 
For assistance, please call: 1-800-211-PANA(7262) 
53 
Direct Commands 
After pressing  
[MENU] 
, you can also program menu items by direct commands ( 
[0]  
 
to  
[9] 
) instead of using the soft keys.
Handset
LCD contrast
Auto talk
Caller ID edit
Set tel line
Set answering
Ringer setting
Ringer volume
Ringer tone
Message play
Date and time
Voice enhancer
Caller IQ
Intercom
Talk Caller ID
Initial setting
Change language
: Off 
: Low 
: Medium
: High
: English   
: Spanish
 :...

 
54 
Troubleshooting 
Cordless Telephone 
Problem Cause & Remedy 
“ 
No link to base. Place 
on cradle and try 
again. 
” is displayed and an 
alarm tone sounds.•You are too far from the base unit. Walk 
closer and try again.
•Place the handset on the base unit and try 
again.
•Plug in the AC adaptor.
•Raise the base unit antenna.
Static, sound cuts in/out, 
fades. Interference from other 
electrical units.•Move the handset and the base unit away 
from other electrical appliances (p. 3).
•Walk closer to...

 
For assistance, please call: 1-800-211-PANA(7262) 
55 
Troubleshooting 
Useful Information
 
Answering System   
The unit does not display the 
caller’s name and/or phone 
number.•You need to subscribe to a Caller ID service.
•Other telephone equipment may be 
interfering with your phone. Disconnect it and 
try again.
•Other electrical appliances connected to the 
same outlet may be interfering with Caller ID.
•Telephone line noise may be affecting Caller 
ID.
•The caller requested not to send his/her...

 
Troubleshooting 
56 
“” is displayed and the 
ANSWER ON indicator 
flashes rapidly. No new 
messages are recorded.•Memory is full. Erase unnecessary 
messages (p. 46).
You cannot operate the 
Answering System with the 
base unit.•The handset user is operating the Answering 
System, or is on the phone. Wait until the 
IN USE/CHARGE indicator light goes out.
You cannot operate the 
Answering System from a 
touch tone phone.•Make sure you enter the correct remote code 
(p. 48).
•The Answering System may...

 
For assistance, please call: 1-800-211-PANA(7262) 
57 
Troubleshooting 
Useful Information
 
General  
Problem Cause & Remedy 
The unit does not work.•Check the settings (p. 8–9).
•Check whether the dialing mode setting is 
correct (p. 13).
•Charge the battery fully (p. 8).
•Clean the charge contacts and charge again 
(p. 9).
•Install the battery properly (p. 8).
•Place the handset on the base unit and 
unplug the AC adaptor to reset it. Plug in, and 
try again.
•Re-install the battery (p. 8) and...

 
Troubleshooting 
58 
If you cannot solve your 
problem•Call our customer call center at 
1-800-211-PANA(7262).
•Panasonic’s e-mail address for customer 
inquiries:
[email protected] 
for customers in the USA or Puerto Rico 
ONLY
When you try to download 
phone book data or 
information from openLCR, 
the voice prompt is not 
announced from the handset 
while “ 
Listen & follow 
phone guidance. 
” is being 
displayed.•Check the settings (p. 8–9).
•If you cannot solve a problem, consult...

 
For assistance, please call openLCR: 1-866-openLCR(1-866-673-6527) 
59 
Useful Information
 
openLCR Service for Caller IQ Feature 
The Caller IQ feature is compatible with service provided by openLCR. 
Important:
•If you have any questions regarding the openLCR service, call openLCR’s 
customer service department at 1-866-openLCR (1-866-673-6527). 
•NEITHER PANASONIC COMMUNICATIONS CO., LTD. (PCC) NOR 
MATSUSHITA ELECTRIC CORPORATION OF AMERICA (MECA) IS IN ANY 
WAY AFFILIATED WITH, OR RESPONSIBLE FOR...

 
openLCR Service for Caller IQ Feature 
60 
Downloading Phone Book Data 
To create your phone book, go to the openLCR web site to update your phone 
book, then download the data to your unit. Accessing the openLCR web site can be 
done from any computer with Internet access.
•While downloading from openLCR, “” flashes on the base unit display. 
To create phone book data 
If you have already stored items into the phone book of the unit, you need to enter 
all of those stored items on the openLCR web site....