Panasonic Kx Tg2258 Operating Instructions Manual

 
Preparation
 
For assistance, please call: 1-800-211-PANA(7262) 
11 
Programmable Functions 
Useful information: 
•If  
Select 
 is pressed while “ 
---(Go back)--- 
” is displayed, the unit will go 
back to the previous menu mode. If you press the key in the main menu, the unit 
will exit programming mode.
•After programming is complete, the display will return to the main menu or the 
sub-menu depending on which menu the selected item is located. (See the menu 
table below.)
•You can exit programming...

 
Programmable Functions 
12 
Date and Time    
“” flashes on the base unit display if the clock has not been 
set. Set the clock by following the steps below. 
•When entering the time in step 3, you cannot enter numbers greater than 12.  
Do 
not use military time. 
 (To set 13:00 hours, enter “0100”, then select “  
PM  
” in 
step 4.) 
  
To check the date/time, 
 repeat steps 1 and 2 above.  
•The current date/time is displayed. When finished, press  
[OFF] 
. 
1 
Press  
[MENU] 
. 
2 
Scroll to “...

 
Preparation
 
For assistance, please call: 1-800-211-PANA(7262) 
13 
Programmable Functions
Display Language 
 
You can select either ENGLISH or SPANISH as the display language. The factory 
preset is ENGLISH.  
Dialing Mode  
If you have touch tone service, set to “Tone”. If rotary or pulse service is used, set 
dialing mode to “Pulse”. The factory preset is “Tone”. 
1 
Press  
[MENU] 
. 
2 
Scroll to “ 
Initial setting 
” by pressing  
[] 
 
or  
[] 
, then press  
Select 
. 
3 
Scroll to “ 
Change...

 
Programmable Functions 
14 
Line Mode  
The line mode is preset at the factory to “B”. Generally leave the line mode “B”. If a 
change of the line mode setting is required by our customer call center or service 
person, change the line mode to “A”.  
Voice Enhancer Technology  
Voice Enhancer Technology ( ) helps clarify and improve sound reception 
creating a natural-sounding voice that is easy to hear and understand. 
This is accomplished by enhancing the frequency that is narrowed through the...

 
Preparation
 
For assistance, please call: 1-800-211-PANA(7262) 
15 
Programmable Functions 
To turn the mode ON while talking, 
 press  
(VE) 
.  
•“ ” is displayed.
•Each time you press  
(VE) 
, the mode will change to ON 
or OFF. 
Talking Caller ID  
After subscribing to a Caller ID service, the handset will display a caller’s name and 
phone number (p. 27). Name and telephone number Caller ID service is required. 
This Talking Caller ID feature allows the unit to announce a displayed caller’s name...

 
Programmable Functions 
16 
LCD Contrast  
You can select the handset LCD contrast (5 levels). The factory preset is level 3.  
1 
Press  
[MENU] 
. 
2 
Scroll to “ 
Initial setting 
” by pressing  
[] 
 
or  
[] 
, then press  
Select 
. 
3 
Press  
Select 
 at “ 
LCD contrast 
”. 
4 
Select the desired contrast by pressing  
[] 
 or  
[] 
. 
•Each time you press  
[] 
 or  
[] 
, the LCD contrast 
will change. 
5 
Press  
Save 
, then press  
[OFF] 
.
Handset
>
>Initial settingExit  Select>>
LCD...

 
Preparation
 
For assistance, please call: 1-800-211-PANA(7262) 
17 
Programmable Functions
Ringer Volume 
 
You can select the handset or base unit ringer volume HIGH, MEDIUM, LOW or 
OFF. The factory preset is HIGH. If set to OFF, the handset or base unit will not ring 
and a caller’s name will not be announced even if the Talking Caller ID feature is ON 
(p. 15).  
  
•If set to OFF, the handset displays “ 
Ringer off 
” while not in use. But if there are 
missed calls and the handset is off the...

 
18 
Programmable Functions
Ringer Tone  
You can select one of 6 ringer tones for external calls on the handset and the base 
unit. The factory preset is 1.  
Preparing the Answering System 
Greeting Message  
You can record a personal greeting message of  
up to 2 minutes 
. If you do not 
record your own message, one of two pre-recorded greetings will be played for 
callers (p. 20).  
•You can set an enhanced recording mode for clearer sound, if necessary (p. 21). 
1 
Press  
[MENU] 
. 
2 
Press...

 
For assistance, please call: 1-800-211-PANA(7262) 
19 
Preparing the Answering System 
Preparation
 
To record a greeting message 
•If “” is shown on the base unit display and 6 beeps sound, your greeting is not 
recorded correctly. Record it again. 
To check the greeting 
Press  
[GREETING CHECK] 
. 
•The greeting will be played. 
To erase the greeting 
Press  
[GREETING CHECK] 
, then 
press  
[ERASE] 
 while the recorded 
message is being played. 
•The unit will answer calls with a pre-
recorded...

 
Preparing the Answering System 
20 
Pre-recorded greeting 
If you do not record a greeting (p. 19), one of two greetings will be played when a 
call is received, depending on the caller’s recording time (see below). 
To check the pre-recorded greeting, 
 press  
[GREETING CHECK] 
. 
•A pre-recorded greeting will be played as follows: 
 
When the recording time is set to “1 minute”, “2 minutes” or “3 minutes”: 
“ 
Hello, we are not available now. Please leave your name and phone number after the 
beep....