Panasonic Kx Tg2258 Operating Instructions Manual

 
Using the Caller List 
Cordless Telephone
 
For assistance, please call: 1-800-211-PANA(7262) 
31 
Caller ID Number Auto Edit Feature  
There are 3 patterns of phone number ( ,   and  , p. 30). This feature allows 
your phone to automatically edit an in-coming Caller ID number into a pattern of 
your choice, and display the Caller ID number with that pattern.
After this feature is activated, Caller ID numbers coming from specific area codes 
(201, for example), from which the Caller ID numbers have been...

 
Using the Caller List 
32 
Storing Caller Information in the Phone Book  
Callers’ names and phone numbers that are in the Caller List can be stored in the 
phone book.   
•If the handset beeps 3 times and  “ 
Phone book full 
” is displayed in step 4, 
press  
[OFF] 
 to exit the list. To erase other stored items from the phone book, see 
page 37.
•You cannot store caller information in the phone book if a phone number is not 
displayed.
•If the handset beeps 3 times and “ 
Save error 
” is displayed...

 
Using the Caller List 
Cordless Telephone
 
For assistance, please call: 1-800-211-PANA(7262) 
33 
Erasing Caller Information  
To erase a specific caller 
To erase all entries 
If the display shows that you have “missed calls”, you cannot erase all Caller List 
entries. Before erasing all entries, make sure that you have viewed all missed calls.
•To cancel erasing, press  
No 
 after step 2. 
1 
Press  
Rcvd calls 
 to enter the Caller List. 
•You can also enter by pressing 
 []  
or 
 [] 
.  
2...

 
34 
Phone Book 
You can store up to 50 names and phone numbers in the handset phone book. All 
phone book items are sorted alphabetically. You can make a call by selecting a 
name on the handset display. 
Storing Names and Numbers 
•If the handset beeps 3 times when you press  
Save 
, the item cannot be stored in 
the phone book. Place the handset on the base unit and try again from step 1. 
1 
Press  
Phone book 
. 
2 
Press  
Add 
. 
•When 50 items are stored in the phone book, 
“ 
Add 
” is not...

 
Phone Book 
Cordless Telephone
 
For assistance, please call: 1-800-211-PANA(7262) 
35  
Selecting characters to enter names 
Enter names using the dialing buttons. Press each button until the desired 
character is displayed.
•Pressing each button selects a character in the order shown below.  
For example, to enter “To m”:   
If you make a mistake when entering a name or number 
Use   to erase the incorrect character. Each time you press  , a character is 
erased. Then re-enter the correct character....

 
Phone Book 
36 
Dialing from the Phone Book    
•To exit the phone book list, press  
[OFF] 
.
•If “ 
No items stored 
” is displayed in step 2, the phone book is empty.
•To view a phone number over 16 digits, repeat steps 1 to 3, then press  
Select  
,   
Edit 
 and then  
[] 
. When finished, press  
[OFF] 
. 
To search for a name by initial 
1. Repeat the steps 1 and 2 above.
2. Press the dialing button for the first letter of the desired name until any 
name with the same initial is displayed (see...

 
Phone Book 
Cordless Telephone
 
For assistance, please call: 1-800-211-PANA(7262) 
37 
Editing an Item in the Phone Book 
Erasing an Item in the Phone Book  
•To cancel erasing, press  
No 
 after step 4. 
1 
Press  
Phone book 
 to enter the phone book. 
2 
Press  
Search 
. 
3 
Scroll to the desired item by pressing  
[] 
 or  
[] 
, then press  
Select 
. 
•To search for the item by initial, see page 36. 
4 
Press  
Edit 
. 
5 
Edit the name (p. 35), then press  
[] 
. 
•If you do not need to...

 
38 
Intercom 
  
A 2-way intercom can be set up between the base unit and the handset. 
Paging the base unit from 
the handset  Paging the handset from 
the base unit (Handset 
locator) 
Using this feature, you can also locate 
the misplaced handset.  
•If you do not want to answer the page 
in step 2, press  
[OFF] 
 to stop paging.
HandsetBase Unit
 
1 
Handset: 
Press  
[MENU] 
.  
2 
Handset: 
Scroll to “ 
Intercom 
” by 
pressing  
[] 
 or  
[] 
, then press  
Select 
. 
3 
Base unit: 
When the...

 
Intercom 
Cordless Telephone
 
For assistance, please call: 1-800-211-PANA(7262) 
39 
Transferring a Call    
You can transfer a call between the handset and the base unit. 
From the handset to the 
base unit  From the base unit to the 
handset  
HandsetBase Unit
 
1 
Handset: 
During a call, press  
Hold 
.  
•The call is put on hold. 
2 
Handset: 
Press  
Intercom 
. Talk to the 
paged party after the beeps.  
•If the base unit user does not 
answer, press  
[] 
 or  
[] 
 to 
return to the call. 
3...

 
40 
Special Features 
Automatic Security Code Setting 
  
  
Each time you place the handset on the base unit, the unit automatically selects 
one of a million security codes. These codes help prevent the unauthorized use of 
your telephone line by another cordless telephone user. 
Temporary Tone  Dialing 
(For Rotary or Pulse Service Users)  
  
Press  
[] 
 (TONE) before entering access numbers which require tone dialing.
•The dialing mode changes to tone. You can enter numbers to access an...