Panasonic Kx Tg2227 Operating Instructions Manual

21
Cordless Telephone
For assistance, please call: 1-800-211-PANA(7262)For assistance, please call: 1-800-211-PANA(7262)
(OFF) 
Microphone 
       
        
(HOLD/INTERCOM) 
(REDIAL/PAUSE) 
TALK/MUTE 
Indicator 
,     ,
Making Calls
1
Press .
•The TALK/MUTE indicator lights.
2
Dial a phone number.
3
To hang up, press (OFF)or place 
the handset on the base unit.
•The indicator light goes out.
•If an alarm tone sounds in step 1, move
closer to the base unit or place the handset
on the base unit and try...

22If noise interferes with the conversation
Press Üto select a clearer channel in the talk, intercom or remote
operation mode, or move closer to the base unit.
To redial the last number dialed on the handset
Press or and press (REDIAL/PAUSE).
To adjust the receiver volume (HIGH, MEDIUM or LOW)
or speaker volume (6 levels) while talking
To increase, press Ñ. To decrease, press Ö.
While using 
•Each time you press Ñor Ö, the volume level will change among 3 levels
(HIGH, MEDIUM or LOW). 
Your phone comes...

23
Cordless Telephone
For assistance, please call: 1-800-211-PANA(7262)
Answering Calls
1
If the handset is off the base unit;
Press .
•You can also answer a call by pressing
any dialing button (0)to (9), (*)or (#)
(—Any Key Talk).
OR
Press 
, andwhen the other party
answers, talk into the microphone.
OR
If the handset is on the base unit, just
lif t up. 
2
To hang up, press (OFF)or place the
handset on the base unit.
Microphone
(OFF)
IN USE/CHARGE/HOLD 
Indicator
When a call is received, the unit rings...

24
Speed Dialer
Storing Phone Numbers 
You can store up to 10 phone numbers in the handset. The dialing
buttons (
(0)to (9)) function as memory stations. 
Make sure the unit is not being used and the handset is lifted off the
base unit.
1
Press (PROGRAM).
•The TALK/MUTE indicator flashes.
2
Enter a phone number up to 22
digits.
•If you misdial, press (OFF)to end
storing
and start again from step 1.
3
Press á.
4
Press a memory station number
(
(0)to (9)).
•A beep sounds. 
•To store other numbers, repeat...

25
Cordless Telephone
For assistance, please call: 1-800-211-PANA(7262)
Intercom
A 2-way intercom is possible between the handset and the base unit.
Paging the base unit from the handset
1
Handset:
Press 
(HOLD/INTERCOM). 
Talk to the paged party after 
the beeps.
•The INTERCOM/2WAY REC 
indicator lights.
2
Base unit:
When the other party’s 
voice is heard, answer 
using the MIC.
3
To end the intercom, 
press 
(OFF)on the handset.
OR
Press 
(LOCATOR/INTERCOM)
on the base unit.
Paging the handset from the...

26
Automatic Security Code Setting
Each time you place the handset on the base unit, the unit automatically
selects one of more than a million security codes. These codes help
prevent the unauthorized use of your telephone line by another cordless
telephone user.
Temporary Tone Dialing
(For Rotary or Pulse Service Users)
Press (TONE)before entering access numbers which require tone dialing.
•The dialing mode changes to tone. You can enter numbers to access an
answering service, electronic banking...

FLASH Button
Pressing (FLASH/CALL!WAIT/PLAYBACK)allows you to use special
features of your host PBX such as transferring an extension call or
accessing special telephone services (optional) such as call waiting. 
•Pressing (FLASH/CALL!WAIT/PLAYBACK)causes to release following
operations:
—temporary tone dialing, 
—muting your conversation, or
—recording your conversation.
Selecting the flash time
The flash time depends on your telephone exchange or host PBX. 
You can select the following flash times: “700,...

28
Automatic Answering Operation
When the unit answers a call, a greeting message is played and the
caller’s message is recorded. 
•The total recording time (including greeting message) is about
15 minutes. If messages are recorded in noisy rooms, the time may
be shortened by up to 3 minutes.
•A maximum of 64 messages (including greeting message) can be
recorded.
Setting the Unit to Answer Calls
Press (ANSWER!ON)to turn on the answering 
system.
•The indicator lights and “Answer set” is
heard.
•The unit...

29
Answering System
For assistance, please call: 1-800-211-PANA(7262)
Listening to Messages
You can see the total number of recorded messages on the base unit
display. If MESSAGE PLAYBACK indicator flashes, new message have
been recorded.
To play back messages, press
(MESSAGE!PLAYBACK/SLOW!TALK).
When you have new messages:
the unit announces the number of
new messages and only new
messages are played back.
When you have no new messages:
the unit announces “No new messages.
All messages playback” and...

Listening to Messages
30
To stop
operationPress (STOP).
•To resume playback, press
(MESSAGE!PLAYBACK/SLOW!TALK).
•If you do not press any button for 60 seconds or if you press
(STOP)again, the playback mode will be canceled.
Press (REPEAT).
•If you press within 5 seconds of playback, the previous
message will be played.
Press (SKIP).
During playback
To repeat
message
To skip
message