Panasonic Kx Tg2227 Operating Instructions Manual

Preparation
Cordless Telephone
Answering System
Useful Information
2.4GHz Digital Cordless Answering system
Model No.
KX-TG2227S
Pulse-or-tone dialing capability
Operating Instructions
Charge the battery for about 15 hours before initial use.
PLEASE READ BEFORE USE AND SAVE.
Panasonic World Wide Web address:  http://www.panasonic.com
for customers in the USA or Puerto Rico 

2
Before Initial Use
Please read IMPORTANT SAFETY
INSTRUCTIONS on page 52 before use.
Read and understand all instructions.
Thank you for purchasing your new Panasonic cordless
telephone.
Attach your purchase receipt here.
For your future reference
Serial No. Date of purchase
(found on the bottom of the unit)
Name and address of dealer
Accessories (included)For extra orders, call 1-800-332-5368.
AC Adaptor (p. 9)
Order No. PQLV1Z
one
Telephone Line Cord
(p. 9)
Order No. PQJA10075Z
one
Battery (p. 10,...

3For assistance, please call: 1-800-211-PANA(7262)For assistance, please call: 1-800-211-PANA(7262)
For Best Performance
Battery Charge
A rechargeable Ni-Cd battery powers the
handset. Charge the battery for about 15
hoursbefore initial use (p. 10).
Base Unit Location/Noise
Calls are transmitted between the base unit and the handset using
wireless radio waves. For maximum distance and noise-free
operation, the recommended base unit location is:
Note:
While using the handset:
•If you are near a microwave...

Contents
4
Preparation
Location of Controls...................................................................... 6
Display............................................................................................. 8
Settings............................................................................................ 9
Connections ................................................................................... 9
Installing the Battery in the Handset .............................................10...

Answering System
Automatic Answering Operation..................................................28
Setting the Unit to Answer Calls ...................................................28
Listening to Messages...................................................................29
Slow Talk Message Playback .......................................................29
From the Handset .........................................................................31
Erasing...

Location of Controls
6Handset
CHA
U
T
O AUTO
CALL 
L W
A WAITPAUSE
USE
ALL
  L MSG
NEW
  W MSG
TONE
TONE
STOP
A
N ANS
  S O
FF OFF ANS
  S ON
SK
IP KIP REP
E PEAT
PLAY BACK
AY BACK
98
321654
70
IN
INTERCOMSP-
PHONE
  HOLD
REDIAL FLASH  
H  
T
A
L
K
/
M
U
T
ERECHARGEINTERCOM/
2WAY REC
RINGER RINGER
MUTE
2WAY RECPROGRAM
Antenna
(MUTE) Button (p. 26)
(2WAYÒREC) Button (p. 33)
(OFF) Button 
(p. 12, 17, 21,
 25, 40)
(HOLD/INTERCOM) Button 
(p. 22, 25)
(REDIAL/PAUSE) Button 
(p. 22, 27)
(TONE) Button (p. 26)...

7
Preparation
For assistance, please call: 1-800-211-PANA(7262)
IN
 U N US
E
/
 
  SE/  CH
CHARGE/
E/V
O
L VOLU
M
E UME
MIC
S
K
IP SKIP R
E
P
E
A
T REPEATERASE MEMO
MEMO
S
L
O
W
  SLOW  T
A
L
K TALKGREETING
STOP
KX-TG
KX-TG2257
2257
HOLD
HOLD
IN USE/CHARGE/HOLD
Indicator (p. 10, 22)
(LOCATOR/INTERCOM) Button 
(p. 25)
Antenna (p. 3, 9) 
Display (p. 8)
Charge Contacts (p. 11)
VOLUME       ,        Buttons 
(p. 15, 29)
Hook (p. 42, 43)
(REPEAT) Button (p. 30)
(SKIP) Button (p. 30)
(ERASE) Button (p. 16,...

8Base unit display
The clock needs adjusting (p. 18).
Your greeting or memo message was not
recorded correctly. Record it again (p. 15, 33).
The unit is in the answering system
programming mode.
The speaker volume level is set to “5”. 
You can select:
— 9 levels (0– 8) are available while using the
answering system (p. 15, 29).
— 8 levels (1– 8) are available while using the
intercom (p. 25).
12 messages have been recorded.
FULLMemory is full. Erase some, or all, of the
messages (p. 32).
The recording...

9
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Settings
Connections
•USE ONLY WITH Panasonic AC ADAPTOR PQLV1 (Order No. PQLV1Z).
•The AC adaptor must remain connected at all times. (It is normal for the adaptor
to feel warm during use.)
•To connect a standard telephone on the same line, see page 46.
Single-Line
Telephone Jack
(RJ11C)
Telephone Line Cord
AC Adaptor
Raise the
antenna.Fasten the AC adaptor cord to
prevent it from being
disconnected.
Power Outlet 
(AC 120 V, 60 Hz) Hook 

10
Settings
Battery Charge
Place the handset on the base unit and charge for about 15 hoursbefore
initial use.
•The IN USE/CHARGE/HOLD indicator lights and a beep sounds. 
Installing the Battery in the Handset
IN USE/CHARGE/HOLD Indicator
OR
Insert the battery into the handset as shown (#), matching the correct
polarity. Press the battery down until it places into the compartment ($).
When finished, close the cover.
2
1