Home > Panasonic > Communications System > Panasonic Kx-Td816e, Kx-td1232e User Manual

Panasonic Kx-Td816e, Kx-td1232e User Manual

Here you can view all the pages of manual Panasonic Kx-Td816e, Kx-td1232e User Manual. The Panasonic manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 291

4.4Special Display Features
4-182DPT Features
Conditions
•When using a KX-T7436,you can press a Function button (F1 through F10) on the
same line of the desired item instead of the SEL (S3) button.
•Before rotating the Jog Dial,you can press the corresponding alphabet key to select the
desired letter.
 Press 2 two times to display “B”items.
Paging Group(00-16)
Page GRP00-16
Parallel On/Off(1/0)
Parallel 1/0Pages to all or a particular extension group.
— “Paging – Group”
Sets whether a single line...

Page 292

Section 5
DECT Portable Station Features
Contents
5.1 DECT Portable Station Overview........................................
5-2
5.2 DECT Portable Station Features.......................................5-11
5.3 PS Programming ...............................................................5-46
5.4 PBX Programming ............................................................5-55
5.5 Troubleshooting .................................................................5-60
5.6 Safety Instructions...

Page 293

5-2DECT Portable Station Features
5.1DECT Portable Station Overview
The Panasonic DECT Portable Station (PS),KX-TD7500,can utilise various features of
the KX-TD816 and KX-TD1232 systems.
Up to 16 PSs in the KX-TD816 system and 64 PSs in the KX-TD1232 system can be
assigned as extensions.  To use a PS,the following equipment is required.
2-RF Interface Unit with 4-Station Line (KX-TD144)
The KX-TD144 must be optionally equipped with a Panasonic Digital Super Hybrid
System,KX-TD816 / KX-TD1232.
One...

Page 294

DECT Portable Station Features5-3
5.1DECT Portable Station Overview
n DECT Portable Station (KX-TD7500)
Antenna
Display (Liquid Crystal Display)
(Flexible CO) Buttons
(F1 through F3)
Used to seize a CO line or 
access a feature.
(Clear/Transfer) Button
Used to clear incorrect digits 
while entering numbers, and 
transfer a call to another 
extension.
(Book) Button
Used to enter into the directory 
mode or select a menu in the 
Function mode.
(Recall) Button
Used to disconnect a current 
call and make...

Page 295

5-4DECT Portable Station Features
5.1DECT Portable Station Overview
INTF1F2F3
ABCDEF
GHIJKLMNO
PQRSTUVWXYZ
CLRC
OK
ONOFF
Headset Jack
Power Switch
Microphone
Charge Contacts
Charge Indicator Charge Contacts
n Charger (KX-A275) 

Page 296

DECT Portable Station Features5-5
5.1DECT Portable Station Overview
(Flashing)
Radio signals from the Cell Station
Strong
Medium
Weak
The portable station is
out of range.  Move
closer to the CS.(Flashing)
Battery strength
Fully charged.
Medium
Low
The battery needs
to be charged.
About the LCD(Liquid Crystal Display)
The display has two lines with 16 characters per line,and related symbols to show infor-
mation for call activities as shown below. 
In the Directory or
Programming mode
In the Function...

Page 297

5-6DECT Portable Station Features
5.1DECT Portable Station Overview
After setting the power switch to ON,one of the following displays may appear.
The portable station is in the Stand-by mode.
The date and time (day / month / time) are displayed on the top line.  
You can select displaying the date only (day / month) in PS
Programming.  (Selecting the Date / Time Display)
The number which is determined in PS Programming (e.g.,your exten-
sion number) can be displayed on the bottom line.  (Selecting the...

Page 298

DECT Portable Station Features5-7
5.1DECT Portable Station Overview
Installing the Batteries
You need to charge the battery before initial use and when the battery strength becomes
low.  When the battery strength becomes low,“”flashes or beep tones sound every
five seconds.  During a conversation,the call will hang up automatically within three
minutes.  If idle or in the Programming mode,“BATTERY EMPTY”will be displayed
and the key operation cancelled.  In these cases,recharge the battery or replace...

Page 299

5-8DECT Portable Station Features
5.1DECT Portable Station Overview
Charging a Battery
1.  Connect the charger to a power outlet using the AC adaptor.
2.Slide the battery-attached portable station or the battery in the
charger.
•Charge the battery for about 1.5 hours.
•When charging is completed,the charge indicator will
change from orange to green.
Conditions
•Do not let the charged battery’s electrodes touch metallic objects.  The terminal may
short and overheat,causing burns.
•Clean the charge...

Page 300

DECT Portable Station Features5-9
5.1DECT Portable Station Overview
Initial Settings
PS Registration
After charging the battery,you must register your PS in the system and determine its
extension number.
For registration,please consult with your dealer.
Ringer Volume Adjustment
The ringer volume has seven levels which is indicated by the number of asterisks on the
display.  [Default:*** (level 3)]
If you do not want your portable station to ring,you can select Offor Vibration,which
is convenient while in...
Start reading Panasonic Kx-Td816e, Kx-td1232e User Manual

Related Manuals for Panasonic Kx-Td816e, Kx-td1232e User Manual

All Panasonic manuals