Panasonic Kx-Td816c, Kx-td1232c Digital Super Hybrid System User Manual

APPENDIX
User Manual371
6.1.2 Feature Number List
Numbers listed below are the initial factory settings (default value). There are flexible feature 
numbers and fixed feature numbers. To change the flexible feature numbers, System 
Programming is required. For programming instructions, please consult with your dealer. 
Some Additional Required Digits are different depending on the mode of the Digital Super 
Hybrid System your telephone is connected to.
Flexible Feature Numbers
Feature Default Additional...

APPENDIX
372User Manual
Doorphone Call calling / door open 31 / 55 1-2 (for KX-TD816); 1-4 (for KX-TD1232)
Electronic Station Lockout set 77 000-999 twice
Electronic Station Lockout cancel 77 000-999
Executive Busy Override Deny set/cancel 733 1 / 0
External Feature Access 6
Hotel Application — Room Status 736
Live Call Screening (LCS) Password set 799 000-999 twice
Live Call Screening (LCS) Password cancel 799 000-999
Log-In/Log-Out 45 1 / 0
Message Waiting set/cancel 70 1+extension no. / 0+extension...

APPENDIX
User Manual373
Station Speed Dialing programming 30 (0-9)+phone no. + #
System Speed Dialing (for SLT) 000-499
System Working Report print out / clear 794 1 / 0
Timed Reminder set 76 1+hhmm
*2+(0 / 1)+(0 / 1)
Timed Reminder cancel/confirm 76 0 / 2
Timed Reminder, Remote set
71+extension no. +hhmm
*2+(0 / 1)+(0 / 1)
Timed Reminder, Remote cancel/confirm
70+extension no. / 2+extension no.
Walking COS set 47 Walking COS password+your extension no.
Whisper OHCA set/cancel 731 3 / 0
*1Available for...

APPENDIX
374User Manual
Conditions
Extension numbers can be three or four digits in length. Any number can be set as the 
leading first or second digit.
Flexible feature numbers can only be dialed while a dial tone is heard.
When    or # are included in a feature number, it will not be possible for users with dial 
pulse (DP) telephones to access the feature.
Programming Guide References
[003] Extension Number Set
[100] Flexible Numbering
User Manual References
3.2.4 [003] Extension Number Set 

APPENDIX
User Manual375
6.1.3 Tone List
1 s
Confirmation Tone 1
Confirmation Tone 2
Confirmation Tone 3
Confirmation Tone 4
Dial Tone 1
Dial Tone 2
Dial Tone 4
Busy Tone
Ringback Tone 1
Ringback Tone 2
Do Not Disturb (DND)
Tone
Reorder Tone
Dial Tone 3

Outside-to-Outside Line 
Call Limit Warning Tone 

APPENDIX
376User Manual
Hold Recall
15 s
Call Waiting Tone 1

1 s
Outside Calls /
Outside Call Hold Recall
Intercom Calls /
Intercom Hold Recall
Doorphone Calls /
Timed Reminder
Callback Ringing
(Camp-on Recall)
5 s
Call Waiting Tone 2
(outside line)
Call Waiting Tone 2
(intercom)
15 s 

APPENDIX
User Manual377
6.1.4 Troubleshooting
If a power failure should occur...
Your System enables conversations between specific outside lines and extensions (Power 
Failure Transfer), and supports system data backup.
Power Failure Transfer
Specific extensions are automatically connected straight to specific outside lines. This provides 
outside line conversations between the pre-assigned extensions and outside lines:

Outside line 01 is connected to extension jack number 01.
Outside line 02 is...

APPENDIX
378User Manual
The display flashes the 
following message:The system internal clock 
does not work properly.Consult with an authorized 
Panasonic Factory Service 
Center. Problem Probable Cause Possible Solution
Set Time & Date
THU JAN01 12:00A 

Index
379
Section 7
Index 

Index
380
A
Absent Message Capability 100
Account Code Entry
 103
Alternate Calling — Ring / Voice
 107
ANSWER
 351
ANSWER and RELEASE Buttons Operation
 
361
Answering, Direct Outside Line
 109
AUTO ANSWER/MUTE
 28
AUTO DIAL/STORE
 28
Automatic Callback Busy
 110
B
Background Music (BGM) 113
Background Music (BGM) — External
 279
Bilingual Display Selection
 53, 364
BSS / OHCA / Whisper OHCA
 114, 150, 218
Busy Station Signaling (BSS)
 114
C
Call Forwarding / Do Not Disturb 309
Call Forwarding — All...