Panasonic Kx Taw848 Operating Manual
Here you can view all the pages of manual Panasonic Kx Taw848 Operating Manual. The Panasonic manuals for Wireless PBX are available online for free. You can easily download all the documents as PDF.
Page 111
1.3 Telephone Features and Operation Operating Manual 111 Some wired telephones are prohibited from using this feature. If you go off-hook while your paralleled telephone is in use, the call will switch over to you.
Page 112
1.4 Display Features 112 Operating Manual 1.4 Display Features 1.4.1 Directories You can select and call using the directories (Personal Speed Dialing Directory, System Speed Dialing Directory and Extension Number Directory). Only personal directories can be stored, edited or deleted on your extension. If a call arrives while you are using a directory, the display will be replace with the callers information. – Calling with the Directory – Storing New Names and Numbers Calling with the Directory To...
Page 113
1.4 Display Features Operating Manual 113 Storing New Names and Numbers To store a Personal Speed Dialing Directory item To cancel or exit, press the FLASH/RECALL button. You can lock your personal speed dialing directory by using an extension PIN (Personal Identification Number), so that you can prohibit access to it. Refer to 3.1.2 Personal Programming. Directory entries generally should include name and number. If the name is not registered, an entry cannot be displayed. Enter phone number...
Page 114
1.4 Display Features 114 Operating Manual 1.4.2 Call Log, Incoming When you receive an outside call or an external sensor call, call information is recorded automatically in the incoming call log. A preprogrammed number of calls can be logged per extension. When the call log is full and other call arrives, the oldest call is deleted. You can modify the logged telephone number using the display proprietary telephone or the portable station. When the Call Log button light turns on, there is a call which...
Page 115
1.4 Display Features Operating Manual 115 The incoming call log information is displayed as follows: To view the log information with the Call Log button To clear the log information *: New is displayed for call logs which have not previously been viewed; Old is displayed for call logs which have previously been viewed. [With Callers Name] [Without Callers Name] MIKE JAN.23 4:21PM Old:Not Answered 1234567 JAN.23 4:21PM Old:Not Answered ---------------------------- Callers number (max. 16 digits)...
Page 116
1.4 Display Features 116 Operating Manual To call The Call Log button light shows the current status as follows: Off: No incoming call, or you have already viewed the call log. Red on: You have missed calls to view. If your call is answered by another extension, the callers information is recorded in the logs of both your extension and the answering extension. You can lock your call log display by using an extension PIN (Personal Identification Number), so that you can prohibit access to your...
Page 117
Operating Manual 117 Section 2 Manager Operation This chapter shows the manager how to control the other extensions or the PBX.
Page 118
2.1 Manager Service Features 118 Operating Manual 2.1 Manager Service Features 2.1.1 Dial Tone Transfer 2.1.2 External BGM (Background Music) The manager extension can broadcast background music in the office through external speakers. To start/stop the background music The manager can change the restriction level, permitting an extension to make a call. The restriction level is changed to the preprogrammed level of Toll Restriction button. Customizing Your Phone 3.1.4 Customizing the Buttons Create...
Page 119
2.1 Manager Service Features Operating Manual 119 2.1.3 OGM (Outgoing Messages) The manager extension can record three kinds of greeting messages (OGM) as follows: All messages have their own extension numbers. You can select the desired message. You have two methods for recording a message. One is recorded using the handset, and the other is recorded from an external BGM (MOH) port. To record To play back1. DISA message: Used to greet and guide callers so that they access extension user group or...
Page 120
2.1 Manager Service Features 120 Operating Manual To record from an external BGM (MOH) port To clear the message Record voice messages only; avoid the recording of music. The default of OGM floating extension numbers is 5xx (xx: two-digit number of message). PT On-hook. Off-hook.Enter 31. 31 Press STORE. When the time limit passes, it stops automatically. The message is played back. The message is recorded.You hear the message. Press CONF. 36Progress Tone & C.Tone C.ToneC.Tone Enter OGM floating...