Panasonic Kx Ta824 Operating Manual

3.2 System Programming (Manager Programming)
Operating Manual 161
3.2 System Programming (Manager Programming)
3.2.1 Programming Information
You can change the default settings of your PBX according to your requirements.
Customizable programming items are shown below, with the program number in parentheses.
 [001] System Speed Dialing Number
 [011] System Speed Dialing Name
 [512] DISA Security Code
 [530] DISA Security Code Digits
Available Extension
The extension connected to extension jack 01...

3.2 System Programming (Manager Programming)
162 Operating Manual
 Icon Descriptions
Fixed Button (KX-T7700/KX-TA30800 series) Function
PREV (PREVIOUS)
NEXT
SECRET
STORE
PA U S E
PROGRAM
END
SELECT
FLASH
CLEAR
–
– 

3.2 System Programming (Manager Programming)
Operating Manual 163
 Procedure
The basic steps are shown below.
1. To enter programming mode
2.To program
You can enter each program number (3 digits).
3.To exit programming mode
3.2.2 System Programming (Manager Programming)
 [001] System Speed Dialing Number
You can store frequently used phone numbers for convenient dialing.
Enter manager password. Enter     #. 
manager password
Press PROGRAM.
Press PROGRAM.
Enter 001. Dial system 
speed dialing 
number...

3.2 System Programming (Manager Programming)
164 Operating Manual
 [011] System Speed Dialing Name
You can store the name associated with each speed dialing number. These names are displayed when 
making calls using the System Speed Dialing feature. To enter characters, refer to Entering Characters.
 [512] DISA Security Code
You can assign required Direct Inward System Access (DISA) security codes if Trunk Security or All 
Security is selected in [511] DISA Security Mode. If the desired number is more...

3.2 System Programming (Manager Programming)
Operating Manual 165
 [530] DISA Security Code Digits
You can select the number of digits used for DISA security codes assigned in [512] DISA Security Code.WA R N I N G
There is a risk that fraudulent telephone calls will be made using the Outside-to-
Outside (CO-to-CO) Line Call feature of DISA.
The cost of such calls will be billed to the owner/renter of the PBX.
To protect the PBX from this kind of fraudulent use, we strongly recommend:
a)Enabling DISA...

3.2 System Programming (Manager Programming)
166 Operating Manual
 Entering Characters
You can enter the following characters. The tables below show you the characters available for each button. 
Table 1 (Alphabet mode)/Table 2 (Numeral mode)
 To enter Ann,
Notes
 To toggle between Alphabet mode and Numeral mode, press SELECT.
 To move the cursor right, press  .
 To delete all characters, press CLEAR. To delete a character, press  .
Ann
6(5 times)6(5 times)2OR 

Operating Manual 167
Section 4
Appendix
This chapter provides Troubleshooting, the Feature Number 
Table and Tone List. Check the Troubleshooting section before 
consulting your dealer. 

4.1 Troubleshooting
168 Operating Manual
4.1 Troubleshooting
4.1.1 Troubleshooting
Problem Remedy
I cannot make calls using the telephone.The telephone is locked. 
 Unlock your telephone. (  1.3.44 Extension 
Lock, 2.1.6 Remote Extension Lock)
Some features do not function.System management may restrict certain features. 
 Consult your manager or dealer. 
I cannot make calls to other extensions 
using a proprietary telephone (PT).An idle or assigned outside (CO) line is being 
seized. The line seized...

4.1 Troubleshooting
Operating Manual 169
I cannot make an outside (CO) line call 
using a One-touch Dialing button or 
Speed Dialing.An outside (CO) line access number was not 
stored with the phone number.
 An outside (CO) line access number is required for 
outside (CO) line calls. (  1.2.1 Making Calls, 3.1.3 
Flexible Button Assignment)
During a conversation with an outside 
party, the call was disconnected.The specified time limit has run out. ( 1.3.27 
Call Transfer—To Outside (CO) Line, 1.3.32...

4.1 Troubleshooting
170 Operating Manual
I want to confirm my extension number.
  Confirm your extension number by pressing the 
  key 2 times while on-hook, or through personal 
programming. 
(  Your Extension Number in 1.1.1 Before 
Operating a Telephone, 3.1.2 Personal Feature 
Assignment—Self-extension Number Confirmation)
The date and/or time are not correct.
  Ask your operator or manager to change the date 
or time. (  Date & Time Set in 2.1.7 System Feature 
Assignment)
The display is dim.
...