Panasonic Kx-ta308, Kx-ta616 Advanced Hybrid System Operating Instructions

1.7 Useful Features
Operations1-73
Advanced Operations
• Be sure the system clock is set correctly.
• The alarm continues for 30 seconds.
• If you receive an incoming call during the alarm, ringing starts after the alarm stops.
• If the alarm is set to sound during a conversation, the alarm will start after the conversation.
• If you set a new time, the preset time will be cleared.
• See the Installation Manual, Section 3, “Timed Reminder”.
Stopping the alarm
Any Telephone
Lift the handset.
• Pressing...

1.7 Useful Features
1-74Operations• The Day/Night/Lunch mode is automatically switched at a predetermined time
(default: 9:00 a.m. for every day, 5:00 p.m. for every night), if the automatic mode is
selected.
• 1.8 Operator/Manager Service Features, “Time(Day/Night/Lunch) Service Setting”
• See the Installation Manual, Section 3, “Time (Day/Night/Lunch) Service”. This system supports the Day, Night and Lunch modes. The system operation for originating
and receiving calls can be different in the day,...

1.7 Useful Features
Operations1-75
Advanced Operations
Joining or Leaving a Call Distribution Group (Log-In/Log-Out)
Allows you to assign the Log-In mode or Log-Out mode
within a hunting, DISA ring or UCD group. When in the
Log-Out mode, you can leave the group temporarily,
preventing hunting calls from being sent to your
extension. The lighting patterns of the Log-In/Log-Out
button on a proprietary telephone and status are as
follows.
Off: Log-In mode
Red: Log-Out mode
Log-In / Log-Out (Using the...

Canceling a monitor temporarily
1.7 Useful Features
1-76Operations
Canceling
PT
Dial 7350#.
7350#
Lift the handset or press 
SP-PHONE/MONITOR.Hang up or press 
SP-PHONE/MONITOR. Confirmation tone
Room Monitor
Allows you to monitor a room through a proprietary telephone with an
AUTO ANSWER/MUTE button (AUTO ANS/MUTE button on a KX-T7300 series).
The proprietary telephone you want to monitor should be prepared for monitoring
beforehand. You can also monitor through a doorphone. You can use a proprietary...

1.7 Useful Features
Operations1-77
Advanced Operations
• The doorphone access tone can be eliminated by System Programming.
• System Programming is required to monitor through a PT.
• The access tone will not be sent to the monitored PT. The paging tone will also not be sent
to the monitored PT.
• This feature is not available for the KX-T7350, KX-T7050 and KX-T7055.
• See the Installation Manual, Section 3, “Room Monitor”.
• See the Installation Manual, Section 3, “Doorphone Call”. PT
PT
PT
Monitoring...

1.7 Useful Features
1-78Operations
Parallel Connection of a Proprietary Telephone and Single Line
Telephone (Paralleled Telephone Connection)
Any extension connected to extension jacks 01 through 16 can be connected in parallel with a
proprietary telephone and a single line telephone. In the event of a power failure, CO1 and
CO4 can be accessed using the single line telephones that are connected in parallel with the
proprietary telephones to extension jacks 01 and 09 respectively. If the extension...

1.7 Useful Features
Operations1-79
Advanced Operations
External Feature Access
• A “Flash Time” must be assigned as required by the host PBX, or outside (CO) line.
• You may access some features of the host PBX using the FLASH button. If the system is
connected to a host PBX and the flash operation is required, follow the flash operation
procedure which is required by the host PBX.
• FLASH button also allows you to disconnect the current call and make another call without
hanging up by System Programming....

• See the Installation Manual, Section 3, “Music on Hold/Background Music (BGM)”.
1.7 Useful Features
1-80Operations
Self-Extension Number Confirmation
(KX-T7330/KX-T7030/KX-T7130/KX-T7033 only)
• Be sure the handset is on the cradle and the SP-PHONE button is off.
• After programming, return the MEMORY switch to the “SET” position or press the
PROGRAM button on the KX-T7300 series.
• You can confirm your Self-Extension Number by pressing “ ” while on-hook.
• See the Installation Manual, Section 3,...

1.7 Useful Features
Operations1-81
Advanced Operations
Extension Button Confirmation
(KX-T7330/KX-T7030/KX-T7130/KX-T7033 only)
You can confirm the values stored in the button using the LCD.
Checking
Press the button you want to confirm.
PT
DSS Console
• Be sure the handset is on the cradle and the SP-PHONE button is off.
• When the display exceeds 17 characters, the “&” mark will be displayed on the right side of
the LCD.
• See the Installation Manual, Section 3, “Extension Button Confirmation (KX-T7330/...

1.7 Useful Features
1-82Operations
Canceling the Feature Settings (Station Feature Clear)
Allows you to reset the following station features to the default settings.
a) Absent Message Capability
b) Automatic Callback Busy (Camp-On)
c) Background Music (BGM)
d) Call Forwarding
e) Call Pickup Deny
f) Call Waiting
g) Data Line Security
h) Do Not Disturb (DND)
i) Executive Busy Override Deny
j) Log-In/Log-Out
k) Message Waiting – (All messages will be erased.)
l) Pickup Dialing – (The stored telephone number...