Panasonic Kx-ta308, Kx-ta616 Advanced Hybrid System Operating Instructions

Operations1-23
1.3 Making Calls
Basic Operations
Dialing with System Speed Dialing (System Speed Dialing)
Allows you to make a call using pre-programmed speed dial numbers. This system supports
100speed dial numbers which are available to all extension users.
PT and SLT
Lift the handset or press 
SP-PHONE/MONITOR.
system speed dial no.
Enter a system speed dial number 
(00 through 99).
AUTO DIAL
STORE
For an SLT For a PT
For a PT: Press AUTO DIAL/STORE.
For an SLT: Dial    .
• You will not hear a tone.
•...

1-24Operations
1.3 Making Calls
• An account code must be stored by pressing “ ” and entering the account code after the
line access code.
• You can store an extension number, telephone number, or feature number of up to 16 digits.
Valid digits are “0 through 9”.
• A pause can be stored by pressing the  key. However, in the account code verify-all,
verify-toll and forced modes, “ ” is not regarded as a pause.
• To store the telephone number of an external party, a line access code (9, 0 or 81 through
86)...

Operations1-25
1.3 Making Calls
Basic OperationsPT
Lift the handset or press SP-PHONE/MONITOR.
3#
Dial 3   .Enter the personal speed 
dial number (0 through 9).
personal speed dial no.
Dial #.
Checking the stored personal speed dialing numbers 

• This feature will not work if you answer an incoming call or retrieve a call on hold.
• Up to 32 digits, consisting of “0 through 9” and “ ”, can be stored. The “ ” button is used
as a PAUSE. However, in the account code verify-all, verify-toll and forced modes, “ ” is
not regarded as a pause.
• An account code must be stored by pressing “ ” and entering the account code after the
line access code.
• During the waiting time after going off-hook, you can call another party and override this
feature. You...

Operations1-27
1.3 Making Calls
Basic Operations
Redialing Automatically (Automatic Redial)
• The number of times can be changed by System Programming.
• If another operation is performed during automatic redial, this function will be canceled.
• To cancel automatic redial, press the FLASH button.
• This feature is not available for a KX-T7055.
• A flexible button can be assigned as the SAVE button.
• 1.3 Making Calls, “Redialing the Last Number Dialed (Last Number Redial)”
• 1.3 Making Calls, “Redialing...

• 1.3 Making Calls, “Redialing Automatically (Automatic Redial)”
• See the Installation Manual, Section 3, “Redial”.
1-28Operations
1.3 Making Calls
Redialing the Saved Number (Saved Number Redial)
Allows you to save the current external telephone number during a conversation, so that you
can redial the same party later using a simple operation. The saved number can be redialed
until another number is stored.
Storing
PT
SAVE
Press SAVE. Press AUTO DIAL/STORE.
During a conversation or while hearing a busy...

Operations1-29
1.3 Making Calls
Basic Operations
Sending a Call Waiting Tone to a Busy Extension 
(Busy Station Signaling – BSS)
The busy extension that you called will hear the assigned Call Waiting tone and know that you
are waiting.
Any Telephone
Dial 2.
2
If you make an intercom call and hear a busy tone
Wait for an answer and talk.
• To answer from the calling extension, see “Call Waiting” in this manual.
• If you hear a reorder tone when you set this feature, this feature cannot be operated with...

1-30Operations
1.3 Making Calls
Canceling
Any Telephone
Lift the handset or press SP-PHONE/MONITOR.
• If you do not answer before four callback ring signals (within 10 seconds), this feature will
be canceled.
• See the Installation Manual, Section 3, “Automatic Callback Busy (Camp-On)”.
! !
Making Your Telephone Ring Back Automatically When a Line
Becomes Free (Automatic Callback Busy – Camp-On)
Allows you to receive callback ringing when the dialed line becomes idle. When you answer
the callback...

Operations1-31
1.3 Making Calls
Basic Operations
To terminate one party and talk to the other
PT
Confirmation tone (optional)Press the CO or INTERCOM 
of the party to remain connected.
COorINTERCOM
Interrupting an Existing Call (Executive Busy Override)
Executive Busy Override — Extension
Allows you to connect to an existing intercom (extension) call.
System Programming is required to use this feature.
Any Telephone
Dial 3.
3
Confirmation tone (optional)
If you make an intercom call and while hearing a...

1-32Operations
1.3 Making Calls
• This feature does not work when “Data Line Security” or “Executive Busy Override Deny”
is set at the extension engaged in the existing outside call.
• When a 2-party call is changed to a 3-party call or vice versa, a confirmation tone is sent to
all parties. Eliminating the tone is programmable.
• 1.3 Making Calls, ‘Denying “Interrupting an Existing Call”(Executive Busy Override Deny)
• 1.7 Useful Features, “Conference (3-party)
• 1.7 Useful Features, “Data Line...