Panasonic Kx-ta308, Kx-ta616 Advanced Hybrid System Operating Instructions

Operations1-13
1.2 Proprietary Telephone Settings
Basic Operations
PT
Restoring the MESSAGE Button
Allows you to restore the message waiting feature to the MESSAGE button.
Press MESSAGE. Dial 3.
3
Press STORE.
AUTO DIAL
STOREMESSAGE
One-Touch Access for System Features
Features that can be accessed using the dialing buttons can also be programmed into memory.
Programming
PT
PT
AUTO DIAL
STORE
Enter the desired feature code. Press STORE.
feature code
Press the programmable button and dial 2 
or press the...

1-14Operations
1.2 Proprietary Telephone Settings
The CONTRAST selector is used to adjust the display contrast.
Display Contrast Adjustment
The Panasonic Advanced Hybrid System supports the use of a headset on a proprietary
telephone (PT). When you use the headset (optional), you should switch the selection mode
Þrst.
When Using the Headset
PT
HIGH          LOW
MID
CONTRAST
Adjust the CONTRAST lever to the 
desired setting (LOW/MID/HIGH).
PT
HANDSET      HEADSET
Adjust the HANDSET/HEADSET 
lever to...

Operations1-15
1.2 Proprietary Telephone Settings
Basic Operations
Allows you to adjust the following volumes as necessary.
To adjust the handset receiver volume
Volume Control Ñ Handset Receiver/Headset/Ringer/Speaker
To adjust the headset volume
To adjust the ringer volume
To adjust the speaker volume
PT
orVOLUME
NORMAL          HIGH      
HANDSET
VOLUME
Adjust the HANDSET VOLUME lever to the desired setting (three levels from NORMAL to HIGH) on the KX-T7000 series. 
OR 
Press the VOLUME Control...

1-16Operations
1.3 Making Calls
Intercom Calling
• After dialing an extension number, you will hear one of the following tones.
Ringback tone:Indicates the destination extension is being called.
Confirmation tone:Indicates you can perform voice calling (e.g. Paging).
Busy tone:Indicates the destination extension is busy.
Do Not Disturb (DND) tone:Indicates the destination extension has set the “Do Not
Disturb (DND)” feature.
• An extension number and a name, if programmed, are shown on a display PT during...

Operations1-17
1.3 Making Calls
Basic Operations
Outside Calling
Allows you to make a call to an external party using one of the following line access methods.
1.) Making Outside Calls Using Automatic Line Access
2.) Making Outside Calls Using Individual Line Access
3.) Making Outside Calls Using Outside (CO) Line Group Access
• An outside (CO) line which is not assigned to a CO button cannot be dialed.
• Helpful hints for the Handsfree (speakerphone) operation are noted in the “Handsfree
Operation”...

1-18Operations
1.3 Making Calls
Making Outside Calls Using Automatic Line Access
Allows you to select an available outside (CO) line automatically.
Any Telephone
Dial 9 or 0.Enter the phone 
number.
90phone no.
Lift the handset or press 
SP-PHONE/MONITOR.Hang up or press 
SP-PHONE/MONITOR. Dial toneTalk.
or
• The selected CO indicator light turns
green.• The display shows the phone number.
• You may skip off-hook and press the Single-CO (S-CO) button directly.
PT
Making Outside Calls Using Individual...

Operations1-19
1.3 Making Calls
Basic Operations
PT and SLT
For a PT: Press the CO assigned as 
               the Group-CO button.
For an SLT: Dial 8 and the outside (CO) line 
group number (1 through 6).Enter the 
phone number.
phone no.
Lift the handset 
or press 
SP-PHONE/MONITOR.Hang up 
or press SP-PHONE. Dial tone
Talk.
For an SLT For a PT8outside (CO) 
line group no.
CO
• The CO indicator light turns green.
• The display shows the phone number.
• You may press the Group-CO button directly instead...

1-20Operations
1.3 Making Calls
• Helpful hints for the Handsfree operation:
— Use this unit in a quiet room for best performance.
— If you and the other party talk at the same time, parts of your conversation will be lost.
To avoid this, talk alternately.
• The handsfree mode is canceled if you do not start dialing within 10 seconds.
• The KX-T7350/KX-T7050/KX-T7055 have MONITOR buttons instead of a SP-PHONE
button. It can be used for handsfree dialing, etc., but it cannot be used for a handsfree...

Operations1-21
1.3 Making Calls
Basic Operations
• An emergency call is allowed even in the following cases,
— Account Code – Verify (All, Toll) modes
— Any toll restriction COS number
— Electronic Station Lockout
• If your telephone is connected to a host PBX, you must dial the host PBX line access code
after the line access code.
• See the Installation Manual, Section 3, “Emergency Call”. Allows you to dial a pre-assigned emergency number after seizing an outside (CO) line.
Up to 5 emergency dial...

1-22Operations
1.3 Making Calls
• The destination numbers are stored in Proprietary Telephone Settings.
• You may press a CO button to select a desired outside (CO) line before pressing the
One-Touch Dialing button.
• “Speed Dialing”, “One-Touch Dialing” and manual dialing can be used together.
• You can store a number consisting of seventeen digits or more by dividing and storing it
into 2 One-Touch Dialing buttons.
• A pause is automatically entered after the stored line access code, 9, 0 or 81 through...