Panasonic Kx T2470 Operating Instructions Manual

							OGM and ICM cassette tapes
oFor optimum sound quality and performance, we recommend that you use side
two after six months and replace the tape every year assuming that the unit
answers about ten calls a day.
oShould the cassette tape break or become worn, replace it with a high qualityNORMAL tape. Use Panasonic (C15 and C30 for OGM, C60 and C90 for ICM),
TDK or MAXELL cassette tape. Metal or chrome tape cannot be used.
oNever place a cassette tape near a magnetic source, such as a magnet or a TV
set, because it may erase the tape.
oSlack in the tape can be tightened by rotating the tape reel with an instrument like
a pencil, as shown.
Cassette panel installation
lf the panel comes off, replace it by pushing as shown.
f
Precaution
Take special care to follow the safety
suggestions listed below.
Safety
1) Power Source: The unit should be
connected to a power supply only
of the type described in the
operating instructions or as marked
on the unit.
2) Nonuse Periods: When the unit is
not used, turn the power off. When
left unused for a long period of time,
the unit should be unplugged from
the household AC outlet.
lf there is any trouble, disconnect the
unit from the telephone line and
connect a known working phone. lf the
known working phone operates
properly, have your Panasonic phone
repaired by one of the specified
Panasonic Factory Service Centers. lf
the known working telephone does not
operate properly, consult with your
telephone company.
Installations
Environment
1) Water and Moisture: Do not use
this unit near water-for example,
near a bath tub, washbowl,
swimming pool, or the like. Damp
basements should also be avoided.
2) Heat: The unit should be situated
away from heat sources such as
radiators and the like. lt also should
not be placed in temperatures less
than 41F (5C) or greater than
104F (40C).
Placement
1) Foreign Material: Care should be
taken so that objects do not fall into
and liquids are not spilled into the
unit. Do not subject this unit to
excessive smoke, dust, mechanical
vibration, or shock.
2) Magnetism: The unit should be
situated away from equipment or
devices that generate a strong
magnetic field.
3) Stacking: Do not place heavy
objects on top of this unit.
4) Surface: Place the unit on a flat
level surface.
WARNING:
TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR ANY TYPE
OF MOISTURE.
This telephone provides
magnetic coupling to hearing
aids.
Fit the peg at the end of
the panels rib into the hole.
-83-- 84-