Home > Panasonic > Answering Machine > Panasonic Kx T2470 Operating Instructions Manual

Panasonic Kx T2470 Operating Instructions Manual

Here you can view all the pages of manual Panasonic Kx T2470 Operating Instructions Manual. The Panasonic manuals for Answering Machine are available online for free. You can easily download all the documents as PDF.

Page 31

*::riiTransferring the ICM
lf a telephone number is stored into the transfer station and the unit is set to thetransfer mode, each time an ICM is recorded, the unit will automatically dial thenumber to which the ICM is to be transferred.
Initial programming for transferring ICM
Before storing the telephone number into the transfer memory station, program asfollows.
1 Press
2 To transfer the ICM to your desired telephone, store the
transferred telephone number into the transfer memory
station. (See page...

Page 32

memory station
Transferring the ICM (cont.),., ,rrfl|E
Storing the telephone number Into thc transfer
Press the PROGRAM button.
The MUTE/SfOHt In(ltontor lrtlhts.
Press the LOWER button.
The MUTE/STORE hdicator llashes.
Press the TRANSFER button.
The MUTE/STORE indicator goes out.
Dial the telephone number (up
to 30 digits).
Press the AUTO/STORE button.
The MUTE/STORE indicator tiahts.
Press the PROGRAM button.
The MUTE/STORE indicator goes out.
Instead of storing the telephone number into the transfer...

Page 33

1
Transferring the ICM (cont.)
Listening to the transferred IGM
Each time an Incoming message is recorded, the unit will automatically dial thephone number to which the Incoming Message is transferred.
Lift the handset when the
telephone rings.
You will hear your transfer OGM.
Dialyour code number (for
example, 19) while the transfer
OGM is playing.
The unit announces the number of newly
recorded messages.
Press 4 right after you hear the
synthesized voice telling the
number of recorded message.Memory...

Page 34

I
fOther Features
Recording a personal messagcf
(Message Memo)
Anyone may record a message
memo at home on the tape. lt will
be heard by anyone retrieving
messages from a remote Phone.
ir,{o+,
fifl
Press the MEMO12WAY button
until a beep sounds.
The lN USE indicator lights.
The number of nrossages on the display
will increase by one.
Start recording at once.
Speak loudly and clearly right after the
beep, about 20 cm (8) away from the
microphone (MlC).
Press the MEMOIzWAY button
again when you finished...

Page 35

T
;
fr
f
;$Adjust the VOLUME control.
*
$
*
*
1
Other Featufes (cont.)
Screening incoming calls
While an Incoming Message is being recorded, you can screen it. Then you may
choose to lift the telephone handset or press the SP-PHONE button and speak to
the caller.
VOTUMEMTN , MAX
lf you want to talk to the caller
during recording of the lCM, lift
the handset or press the
SP-PHONE button and speak to
the caller.
The unit will automatically stop recording
and will be ready to answer the nexl
telephone call....

Page 36

DisplayDescriptlon
(?,J,i)
^Ntn-Antu._tu
The POWER ON/OFF button is set to off.(The POWER indicator is off.)
(+ii:,)
6rcm r
il Lr5
Outgoing Message is being recorded or played
back.
Example: Ll 5  means 25 seconds elasped.
/Message\
\Counter ,/rMGFIIEE
IE
The recording time is set to 1 minute or VOX
mode. The display will show the number of
recorded messages.
(3:1,)
crrn
IE
The recording time is set to Announce only
mode. The display shows the number of calls
received.
(Error)
E -F
oThe OGM tape is...

Page 37

Troubleshooting Guide
Problem Cause & Remedy
The unit does not work when I press I Plug in the AC adaptor then press the
any button. I pOWf n ON/OFF button to turn on
the unit.
The unit does not function. However, | .The cassette tape might be broken.
6 beeps sound and the display shows I Replace it with a new one.Err. | .Clean the heads. (See page 82.)
While recording an OGM, 6 beeps I Re-record your OGM. Speak clearly
and the announcement Please I and loudly, and do not pause for overrecord your...

Page 38

Wall Mounting
The unit can be mounted on a wall phone plate. lf you do not have a modular wall
phone plate installed, we recommend that you consult with your telephone
company or an installer.
Unplug the handset cord from
the unit.
Turn around the handset hook.
ff
#
$
*
il
I
{ts..fI
s
1
4
5
6
Connect the handset cord to the
unit.
Place the handset as shown.
about7 inchesabout4 inches
Insert the telephone cord as
shown.
Place the wall mount adaptor as
shown.
Mount the unit eyelets as shown.
To temporarily...

Page 39

Accessory Order Information
o Replacement parts and accessories are available through your local authorized
parts distributor.oFor the authorized distributors in your area, call toll lree: 1-800-545-2672
Part No.DescriptionComment
KX-JO7W
KX-J15W
KX-J25W
Handset cord7 feet
15 feet
25 feet
(W: white color)
KX-J66T-adaptorParallel connection for
single line
KX-C150
KX-C300
OGM tape
KX-C600
KX-C900
ICM tape
i OUICK REFEREI{CE CARD
iir
li.tr
FOR TONE
lt l
I Back Space I
IFRSI lTutl F nTL LlJ L9J
| 0GM-1 Rec...

Page 40

I
I
c,
$
Maintenance
Because the head and capstan assemblies are in contact with the tape, dirt and
residue from the tape can easily adhere to these parts, causing distortion. These
parts should be cleaned periodically in the manner described below.
Clean the head surtace, pinch roller and capstan with a cotton swab.
lf these surfaces are extremely dirty, dampen the cotton swab with alcohol.
oDo not place magnetic or metal objects, such as a screwdriver, near the head
assemblies, as such objects could...
Start reading Panasonic Kx T2470 Operating Instructions Manual

Related Manuals for Panasonic Kx T2470 Operating Instructions Manual

All Panasonic manuals