Panasonic Kx T2429 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Kx T2429 Operating Instructions Manual. The Panasonic manuals for Telephone are available online for free. You can easily download all the documents as PDF.
Page 21
I To confirm the stored number Repeat storing procedure. When the number is the same as what waspreviously stored, 2 beeps will be heard. When one beep is heard, the new storage isdiflerent from the old one. n To set the transfer mode r I To set immediately alter storage olf a phone number is not stored-rqto tfre transfer memory station, 6 beeps will be heard..lf you did not adjust the transferred time, you cannot set the unit to the Timer Message Transfer mode. This function allows you to set or cancel...
Page 22
How to Adjust Day and Time Be sure the handset is on the cradle and the SP-PHONE button is off. Example: 5:18 PMExample: 3:30 PM rEGE @Er@ PUSH 051 8 @@E@ PUShPROGUNTIL MEi/ORYINOICATORLIGHT IS ON PUSH #8. FORINiTIAt SETTING PUSH # LIGHTLY TOADJUST DAY PUSH,PROGUNTIL I/IEMORYINDICATORTIGHI IS ON PUSH *5 FORINITIAL SETTING PUSH.*.TOADJUST AM/PM PUSH PUSH PBOG N4EMORY. oThe unil will announce the day and time. o Press the buttons continuously. lf you pause for over 30 seconds, the previous time will be...
Page 23
Liquid Crystal Display .Display TypeWhen the display shows tu!11 . -?,-?/Real \tu.fU\fim/oWhen you set the Power Switch to OFF naTn-,- (TaPe \f f \Timer/nu oWhile you are recording or playing back the Outgoing message. example: e 5 means 25 seconds elapsed ry /Messageri [ counter , Recording Time set to 1 MIN or VOX. The display will show the number of recorded messages. EEIE | ^^t \ lB ( E1,, ) Recording Time: ANNOUNCE The display shows the number of calls received. F r r ( Error) oWhen the OGM tape...
Page 24
Cause & ReProblem The unlt doee not work when I push any buttons. I cannot rcmove the cassottg from the unlt. tt I The unit has been set to the Answer I I mode, but no Incoming messages is I I recorded. It, 1 I wrril recording an outgoing I I message, a beep sounds 6 times. Itl I When the tape is played back, the II sound level ls low, even if the Volume I I Control is turned up fully. I\, | | push the button of a remote phone, I I but the unit does notyespond It, tt I Some Incoming messages have not II...
Page 25
Wall Mounting This unit can be mounted on a wall phone plate. lf you do not have a modular wall plate insta1qd, werecommend that you consult with your telephone company or installer to have one. fi;./K.ho.] To temporarily place the handset down during aconversation. hook as shown below. Remove the attaching stand.o .To stor€ a phone no. into the trangferm€mory stationPush the buttons as follows.In uslng the unlt 8t homo ! + E + f L6rfilfiI@E 1[Frm rc] rE+E In u.lng tho unlt at tho officr (pBX)...
Page 26
Cassette TapesMaintenance oFor optimum sound quality and perlcrmance, we recommend you to rePlace the oGM and the ICM cassette taPes every six rnonths and to re-record the outgoing mt sage every three months supposing th; i the unit answers about ten calls a daY. oNever place a cassette tape near a :nagnetic source, such as a magnet or a TV srt, because it will affect the tape qualitY. oA sensing foil (silver) is attached tc lhe endless tape. lf the sensing foil does not cc iact the sensing pole, the...