Panasonic Kx T2429 Operating Instructions Manual

OGM Recordinq r
(Outgoing Messale)
The purpose of the Outgoing message is to inform the calling party that you cannot answer.the calj, but want
lo record the callers message.
E=tt+ tlt_J lJ
oPush OGM START/STOP button.
.Adjust the volume control to confirm.
oWait until the In Use Indicator goes out.
lf you want to record again, repeat from
step 1.
Push the REC button, while holding it,
push the OGM START/STOP button
untilthe beep sound is heard.
Speak clearly and loudly into the MlC.
oSpeak for up to 30...

Prior to Leaving
Listening to
Messagbs
The unit will automatically set to the Answermode by simply pushing the Power Switch.When the telephone rings, the unit will play backthe OGM, then it will record the Callersmessages and the time and day of the messagewill be recorded on the ICM taoe.
After reviewing the Outgoing or Incoming
message the unit will automatically reset itself to
the Answer mode and will be ready to answer the
next call.
I lf you use a new ICM tape or record luture
messages f rom the...

Other Features
While an Incoming call is being recorded, you
can hear it.
1 ROiust the Volume Control.
To talk to the caller directly during
recording of the Incoming call, lift the
handset.oThe ICM tape will stop after recording the
synthesized voice of time and day.
Before operation, set the 2 WAY BEEP to on.
(Reler to Programmable Two Way Beep on
page 27.\
Many States have regulations on the manner in
which 2-Way Telephone Conversations may be
recorded. Consult your public utility agency.
1 Confirm...

Transferring the Incoming Messages
lf a phone number ls stored Into the transfer
station and the unit is set to the transfer mode,
each time the ICM is recorded, the unit will
automatically dialthe number to which the ICM is
to be transferred.
Storing the Transfer Number
Store the phone number to which you want to
transfer the ICM lnto the transfer station.
Lower button
must be pushed
at first.
rRRnsreR ll
lf a phone number is stored inlo the transler
station and transferring tlme is irbgrammed,the unit...

How to Operate from Remote Phone
You can retrieve the recorded Incoming messages from a remote location with tone telephone.-.
Remote operation is simplified by a synthesized voice that offers you options over the telephonel
Before operation, choose a onedigit through
three-digit remote code number and store it in
memory.
Example: 358
Be sure the handset is on the cradle and the
SP-PHONE button is off.
lr: II wIEI\,ORY I
llPUSH.,MEMORY
PUSH PROG.
I You can set lt from 1 to 999.
(ex. 3, 1 2, 345,023,...

now ro vperate
.. from Rgmotg Phone(cont.)
id
rl
Play Back
The unit will rewind the tape even if the tape is
lull and play back all the recorded messages.
oAfter the last message, the voice will say; €nd
ol tinal message..
olf you want to operate in succession, wait for
5 seconds. The unit will re-start Voice Menu
from the beginning.oll End of tape is announced, the ICM tape is
full.
Memory Play Back
The unit will play back the newly recorded
messages.
Reset
The unit will rewind the tape to the...

Push your Remote Code No.
The voice will tell you how many messagesyou have received.
The voice will say;Please push 1 for Play Back.
Pleasepusfr 2 tor another f unctlon,
The voice will say;?lease push 1 tor Memory Playback.
Please push 2 for another function.
The.voice will say;Please push 1 for Marker Message,
Please push 2 for another f unctlon.
The voice will say;?lease pusfr 1 lor Reset.
Please push 2 tor another f unction.
The voice will say;Please push 1 for Answer Back,
Please push 2 tor another...

How to Operate from Remote phone
(cont.)
You can also retrieve the recorded messages and control the unit by the direct remote operatiqn regardlessof the Voice Menu. r - --.-::
lf you dont push any button, the unit wilr enter into Voice Menu mode.
While Incoming messages are being playedback;
To record the new messages from the beginningof the tape.
r After the recorO6d messages are playedback or while they are playlng back;
j
{Ir|:)
tm-ll-lPUSH 2 FOR PUSH 1 FORSKIP FORWARD. BACK SPACE.PUSH 3.
oThe unit...

t:{You can screen any sound in the room where thsunit is installed and contrary, anyone in thatroom will be able to hear your voice.CALL YOUR PUSH COOE NO. PUSH 7.
UNIT. DURING OGM.
oPush the 7 right after you hear the
announcement of the number of the
recored messages.oShort beeps will be heard continuously
until the OGM tape has reset and then a
long beep willbe heard.
Speak clearly and loudly after you hear
the long beep.
.Do not pause for over 2 seconds whilerecording.
When finished, push the 9.
lf...

i How to Operate from Remote Phorig,,
ffiLIFT THEHANDSETAFTERRINGING.
Message Transler:
Each time ICM is recorded, the unit will
automatically dial the phone number to which theICM is transferred.
Timer Message Transfer:
The unit will automatically dial the transferred
number at the time you have set and transmit allthe recored messages.
PUSH CODE NO.OURING THE OGM
Wait for 5 seconds after you hear the
announcement of the number of recorded
messages, the unit will go into the Voice Menu
mode.
(Refer to...