Panasonic Kx Ps8100 Operating Instructions Manual

251 Care and Maintenance
Low Yellow TonerYellow toner will need to be replaced soon.
Lower Left side door
OpenClose Optional Cassette side door.
Lower Tray
EmptyAdd media to Lower tray.
Lower Tray
Not installedInstall Lower tray.
Magenta Toner
EmptyReplace magenta toner.
Magenta Toner Cartridge 
Not installedInstall magenta toner cartridge.
Media Tray
EmptyAdd media to media tray.
Media Tray
Not installedInstall media tray.
Memory Error 0Cycle Power.
Memory Error 1Cycle Power.
Memory Error 2Cycle Power....

252 Care and Maintenance
Multi-Purpose Tray
EmptyAdd media to multi-purpose tray.
NVRAM Error
Settings ChangedNVRAM hardware error. Cycle Power. If 
printer does not function normally, call for 
service.
NVRAM Full
Settings LostHardware error of Flash DIMM. Cycle 
Power. If printer does not function normally, 
call for service.
Oil Roll
Not installedInstall oil web unit.
Oil Roll
wearing outOil supply roll will need to be replaced soon.
Oil Roll
Worn outReplace the oil web unit.
Out of Memory
Job...

253 Care and Maintenance
Press Enter to
Initialize DiskPress the ENTER button to initialize a new 
hard disk. This message will also appear if 
the hard disk has malfunctioned, or if the 
hard disk is the incorrect type. If this error 
appears after cycling power to the printer, 
contact an authorized service 
representative.
Printing 
ConfigurationPrinter is printing the Configuration page.
Printing 
Font ListPrinter is printing the Font List page.
Printing 
Test PagePrinter is printing the Test Page....

254 Care and Maintenance
Some operation errors cause the ERROR indicator to blink and printing to 
stop. A message will be displayed on the LCD panel until the problem is 
fixed. If the LCD panel message includes the instruction, Call for Service, 
contact an authorized service representative.
In addition, if the following conditions occur, turn off and unplug the printer 
and scanner from the outlet and contact a qualified service representative:
•The power cord or plug is damaged or frayed.
•Liquid has...

255
Status display program for Windows
NOTE: 

256 Care and Maintenance
eThis box shows an error or status message and the corresponding icon.
fThis box lists the mode your scanner is in, device name (scanner), the 
built-in memory size of the printer, and the name of the scan job.
gThis button minimizes the Panasonic Scanner Display window. Pressing 
the (Esc) key on the keyboard can also minimize it.
hThis button displays the Status Display Setup window, where you can 
change different settings. 
iThis button displays the version of the Status...

257 Care and Maintenance
lThis button displays the Panasonic Show configuration window.
mThis button displays the previous recovery message.
nThis button displays the initial recovery message.
oThis button displays the next recovery message.
pThis box displays a recovery procedure along with a picture.
qThis button provides you additional help.
rThis button changes the Panasonic Scanner Status window to the 
Panasonic Printer Status window, and is displayed only when using the 
Digital Duplicator Utility. 

258 Care and Maintenance
eThis box shows an error or status message and the corresponding icon.
fThis box lists the mode your printer is in, device name (printer), tray 
being used, the built-in memory size of the printer and the name of the 
print job.
gThis button minimizes the Panasonic Printer Status window. Pressing 
the (Esc) key on the keyboard can also minimize it.
hThis button displays the Setup for Status Display window, where you 
can change different settings.
iThis button displays the...

259 Care and Maintenance
kThis button cancels the print job which caused an error.
lThis button displays the Panasonic Show Configuration window.
mThis button displays the previous recovery message.
nThis button displays the initial recovery message.
oThis button displays the next recovery message.
pThis box displays a recovery procedure along with a picture.
qThis button provides you additional help.
rThis button changes the Panasonic Printer Status window to the 
Panasonic Scanner Status window, and is...

260 Care and Maintenance
Repacking
It is highly recommended that you keep the original carton and ALL packing 
materials. Should you need to transport or ship your unit, please follow 
these instructions.
SAFETY CAUTIONS:
•The printer weighs about 49.5 kg {108.9 lbs.}. It must be handled by two 
people.
•The scanner weighs about 22.5 kg {49.5 lbs.}. It must be handled by two 
people.
NOTES:
•Should you need to send your KX-PS8100 for service, consult your 
reseller first or Panasonic.
•Please use the...