Panasonic Kx Ps8100 Operating Instructions Manual

141 Installing Software for Macintosh
Installing the scanner driver
The Panasonic KX-PS8100 Scanner Driver provides two drivers, TWAIN 
and a Photoshop Plug-in. The driver to be installed depends on your 
Macintosh application. However, TWAIN must be installed to use ColorSync 
adjustment function.
n About the TWAIN scanner driver
The TWAIN driver supports image capturing at controlling the scanner 
within TWAIN compliant application.
A beginner can easily capture images directly from the scanner, using...

142 Installing Software for Macintosh
The advantage of the Photoshop Plug-in driver:
•If you connect the scanner to your computer using the SCSI cable, you 
can capture images directly from the scanner using Photoshop Plug-in 
compliant application software.
•The operation is standardized, a user experienced in Photoshop Plug-in 
peripherals can easily capture images from the scanner.
To install the TWAIN scanner driver:
1Insert the KX-PS8100 CD-ROM Disc2 in your CD-ROM 
drive, and double-click the...

143 Installing Software for Macintosh
6Select Empty Trash... from the Special menu.
7Click [OK].
Panasonic KX-PS8100 TWAIN driver will be removed from your 
Macintosh.
To Install the Photoshop Plug-in driver:
1Insert the KX-PS8100 CD-ROM Disc2 in your CD-ROM 
drive and double-click the KX-PS8100 Disc2 icon.
The Panasonic Scanner Driver window is displayed.
2Double-click the English folder.
 The English window is displayed.
3Double-click the Photoshop Plug-in folder.
The Photoshop Plug-in window is...

144 Installing Software for Macintosh
Installing additional software for Macintosh users
Additional software, including Adobe Type Manager, and PostScript screen 
fonts are included on the KX-PS8100 CD-ROM Disc1. Copy fonts files from 
PS3 Fonts folder on the KX-PS8100 CD-ROM Disc1 to the System Folder 
of your Macintosh hard drive. Note that fonts files need to be moved to 
specific locations (Fonts folder of the System Folder); others can be moved 
to a folder of your choice.
Adobe Type Manager (ATM) is...

Chapter 6
145Setup from the Printer Panel and 
WebSetup
This chapter describes how to configure the printer’s Setup options. The 
settings you specify in Setup determine user access to the printer, printing 
defaults applied to jobs, and general system settings. Some Setup options 
are specified during an initial Setup from the printer panel; others must be 
set later from Fiery WebSetup.
Initial Setup from the printer panel
Initial Setup for network printing must be performed using the printer panel....

146 Setup from the Printer Panel and WebSetup
To conserve energy and operating cost, this printer is provided with a 
programmable power saver feature. The printer is factory set with the power 
saver feature turned on to comply with E
NERGY STAR® requirements. If set 
to On, the printer automatically turns to power saver mode when there are 
no print jobs received or access to the printer panel for more than 30 
minutes. This mode can reduce the total power consumption of the printer 
to less than 35...

147 Setup from the Printer Panel and WebSetup
Before you set up the printer for a Novell IPX network, be sure you have set 
up the Novell servers as described in “Setting up IPX (Novell) printing” on 
page 82.
Network Port Setup
To advance to the next screen, press the ENTER button.
A) When the Ethernet card is installed in the printer:
Ethernet Setup 
Press the ENTER button to enable advance to the Ethernet Speed screen. 
Press the ENTER button.
Ethernet Speed
Auto-Detect/10Mbps/100Mbps [Auto-Detect*]...

148 Setup from the Printer Panel and WebSetup
NOTE:
•Req. All Route and Resp. All Route are displayed only when YES is 
selected in Source Routing.
Req. All Route
Yes/No [No*]
If source routing is enabled, select Yes to allow all routers on the network to 
broadcast the presence of the printer to clients, enabling packets from 
clients on the network to travel to the printer by any route.
Resp. All Route
Yes/No [No*]
If source routing is enabled, and Req. All Route is set to No, select Yes to 
allow all...

149 Setup from the Printer Panel and WebSetup
Press the s/CONTINUE button to increment a value. Press the Ú/
CANCEL button to accept a value and move to the next number to be 
entered. Numbers are entered from right to left. When all values have been 
entered, press the ENTER button to accept your selection.
(*=Default setting)
Ethernet Subnet MaskorToken Ring Subnet Mask
[255.255.255.0*]
Use this option to specify the subnet mask for printing with TCP/IP over 
Ethernet or Token Ring. Press the...

150 Setup from the Printer Panel and WebSetup
C) When you select IPX/SPX Setup:
IPX/SPX Setup
To advance to the next screen, press the ENTER button.
Enable IPX/SPX?
Yes/No [No*]
Select Yes if you have an IPX (Novell) network connected to the printer. 
Note that you can enable AppleTalk, TCP/IP, and IPX (Novell) 
communication simultaneously. 
(*=Default setting)
The panel language setup menus are used to select a language for the 
printer panel.
Language
Press the ENTER button to view language options....