Panasonic Kx Ps8100 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Kx Ps8100 Operating Instructions Manual. The Panasonic manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 161
161 Setup from the Printer Panel and WebSetup Subnet Mask— If you need to set the subnet mask, enter one of the following values: •255.0.0.0 if the IP address starts with a number less than 128 •255.255.0.0 if the IP address starts with a number from 128 through 191 •255.255.255.0 if the IP address starts with a number greater than 191 Be sure to confirm the subnet mask setting with your network administrator before proceeding. In some cases the required setting may be different from those listed....
Page 162
![Page 162
162 Setup from the Printer Panel and WebSetup
Select Zone— The printer searches the network for AppleTalk zones in
your network segment. Scroll through the list to select the AppleTalk zone in
which you want the printer to appear. If your segment has only one zone,
the printer is assigned to that zone automatically.
If no AppleTalk zone can be found, your network may have no defined
zones, or else the network cable has not been connected (see page 70).
Choose [OK].
Select Frames— Click the Select...](http://img.usermanuals.tech/thumb/58/67729/w300_kx-ps8100_en_om_d-161.png "Page 162
162 Setup from the Printer Panel and WebSetup
Select Zone— The printer searches the network for AppleTalk zones in
your network segment. Scroll through the list to select the AppleTalk zone in
which you want the printer to appear. If your segment has only one zone,
the printer is assigned to that zone automatically.
If no AppleTalk zone can be found, your network may have no defined
zones, or else the network cable has not been connected (see page 70).
Choose [OK].
Select Frames— Click the Select...")
162 Setup from the Printer Panel and WebSetup Select Zone— The printer searches the network for AppleTalk zones in your network segment. Scroll through the list to select the AppleTalk zone in which you want the printer to appear. If your segment has only one zone, the printer is assigned to that zone automatically. If no AppleTalk zone can be found, your network may have no defined zones, or else the network cable has not been connected (see page 70). Choose [OK]. Select Frames— Click the Select...
Page 163
163 Setup from the Printer Panel and WebSetup NOTE: •If your network uses both NDS and Bindery, set up NDS first. Setting up NDS after Bindery will overwrite Bindery Setup. If your network uses both NDS and Bindery, including using NetWare 4.x servers in bindery emulation, the KX-PS8100 cannot service NDS and bindery emulation servers on the same NDS tree. PServer Setup (NetWare Services) The Enable PServer mode option must be turned on if you have a Novell server connected. You can change the...
Page 164
![Page 164
164 Setup from the Printer Panel and WebSetup
4Select the new NDS tree and click [Add].
Your new NDS tree selection automatically overwrites any previous
tree selection. If you change the NDS tree selection and there are
also current Bindery settings, you are alerted that they will be
deleted. If you continue with NDS Setup, you can replace Bindery
settings afterwards. To exit NDS Setup, choose [Cancel].
5Click [OK].
The Select login user window appears.
6Select the User Login object from the display...](http://img.usermanuals.tech/thumb/58/67729/w300_kx-ps8100_en_om_d-163.png "Page 164
164 Setup from the Printer Panel and WebSetup
4Select the new NDS tree and click [Add].
Your new NDS tree selection automatically overwrites any previous
tree selection. If you change the NDS tree selection and there are
also current Bindery settings, you are alerted that they will be
deleted. If you continue with NDS Setup, you can replace Bindery
settings afterwards. To exit NDS Setup, choose [Cancel].
5Click [OK].
The Select login user window appears.
6Select the User Login object from the display...")
164 Setup from the Printer Panel and WebSetup 4Select the new NDS tree and click [Add]. Your new NDS tree selection automatically overwrites any previous tree selection. If you change the NDS tree selection and there are also current Bindery settings, you are alerted that they will be deleted. If you continue with NDS Setup, you can replace Bindery settings afterwards. To exit NDS Setup, choose [Cancel]. 5Click [OK]. The Select login user window appears. 6Select the User Login object from the display...
Page 165
165 Setup from the Printer Panel and WebSetup B) PServer Setup (Bindery Setup) Use Bindery Setup if you have already configured one or more bindery servers (file servers running NetWare 3.x or NetWare 4.x in bindery emulation) with a Print Server and a Print Queue for KX-PS8100 jobs (see page 87). Before entering bindery settings, be sure the KX-PS8100 is connected to the network and the NetWare file server is running. You’ll need a login name, and, if access to the file server or print server is...
Page 166
![Page 166
166 Setup from the Printer Panel and WebSetup
10Click [Save].
n Service Setup tab
The Service Setup tab is used to set Windows Printing Service options.
Windows Printing Service enables the Microsoft SMB protocol, which
supports peer-to-peer printing, also known as Windows (WINS) or SMB
printing.
Enable Windows Printing Service— Enable this option to enable SMB
(Server Message Block), the file and printer sharing protocol built into
Windows. Enabling SMB allows the KX-PS8100 to be listed on the...](http://img.usermanuals.tech/thumb/58/67729/w300_kx-ps8100_en_om_d-165.png "Page 166
166 Setup from the Printer Panel and WebSetup
10Click [Save].
n Service Setup tab
The Service Setup tab is used to set Windows Printing Service options.
Windows Printing Service enables the Microsoft SMB protocol, which
supports peer-to-peer printing, also known as Windows (WINS) or SMB
printing.
Enable Windows Printing Service— Enable this option to enable SMB
(Server Message Block), the file and printer sharing protocol built into
Windows. Enabling SMB allows the KX-PS8100 to be listed on the...")
166 Setup from the Printer Panel and WebSetup 10Click [Save]. n Service Setup tab The Service Setup tab is used to set Windows Printing Service options. Windows Printing Service enables the Microsoft SMB protocol, which supports peer-to-peer printing, also known as Windows (WINS) or SMB printing. Enable Windows Printing Service— Enable this option to enable SMB (Server Message Block), the file and printer sharing protocol built into Windows. Enabling SMB allows the KX-PS8100 to be listed on the...
Page 167
167 Setup from the Printer Panel and WebSetup NOTES: •Lowercase characters are not allowed. •Each printer should have a different server name, if several KX-PS8100 printers are connected to the same network. Comment— Server comments (optional) can contain information about the printer. Domain Workgroup— Enter the workgroup or domain you want the KX-PS8100 to appear in. NOTE: •Lowercase characters are not allowed to enter. Use WINS Server— Select to use a WINS name server. Broadcasts from SMB devices...
Page 168
![Page 168
168 Setup from the Printer Panel and WebSetup
In Printer Setup, you specify PostScript printing option settings from the
PS Setup tab.
To set PostScript printing options:
Click the [Printer\Setup] Button.
n PS Setup tab
The options that you can set from the PS Setup tab are described below.
Print to PS Error— Specify whether the KX-PS8100 should print the
available portion of a print job when it encounters a PostScript error. Select
Yes to print an extra page with PostScript error messages. Select No...](http://img.usermanuals.tech/thumb/58/67729/w300_kx-ps8100_en_om_d-167.png "Page 168
168 Setup from the Printer Panel and WebSetup
In Printer Setup, you specify PostScript printing option settings from the
PS Setup tab.
To set PostScript printing options:
Click the [Printer\Setup] Button.
n PS Setup tab
The options that you can set from the PS Setup tab are described below.
Print to PS Error— Specify whether the KX-PS8100 should print the
available portion of a print job when it encounters a PostScript error. Select
Yes to print an extra page with PostScript error messages. Select No...")
168 Setup from the Printer Panel and WebSetup In Printer Setup, you specify PostScript printing option settings from the PS Setup tab. To set PostScript printing options: Click the [Printer\Setup] Button. n PS Setup tab The options that you can set from the PS Setup tab are described below. Print to PS Error— Specify whether the KX-PS8100 should print the available portion of a print job when it encounters a PostScript error. Select Yes to print an extra page with PostScript error messages. Select No...
Page 169
169 Setup from the Printer Panel and WebSetup NOTE: •Some information may not be printed depending on the operating system on which a job is printed. When you have finished specifying settings from Fiery WebSetup, click Save, and then close the Fiery WebSetup window by clicking the X in the top-right corner of the window. The Reboot window appears, and you are asked whether to reboot the computer or not. Select Yes to reboot the printer and initialize the new settings. Saving your settings and...
Page 170
Chapter 7 170Color Calibration Output from color print devices is subject to changes in temperature and humidity, and is prone to drift over time, with a resulting loss in color predictability. Where color accuracy and consistency are crucial, regular calibration of the KX-PS8100 is necessary. The color output of your KX-PS8100 color printer is adjusted using three different methods: Bias Adjustment, VisualCal, and ColorWise Color Adjustment. •Bias Adjustment Used to adjust the overall color...